Create a DRM driver for VGA video cards by tdz

Yes, those VGA video cards. The goal of this project is to implement a DRM graphics driver for such devices. While actual hardware is hard to obtain or even run today, qemu emulates VGA output.

VGA has a number of limitations, which make this project interesting.

• There are only 640x480 pixels (or less) on the screen. That resolution is also a soft lower limit imposed by DRM. It's mostly a problem for desktop environments though.
• Desktop environments assume 16 million colors, but there are only 16 colors with VGA. VGA's 256 color palette is not available at 640x480. We can choose those 16 colors freely. The interesting part is how to choose them. We have to build a palette for the displayed frame and map each color to one of the palette's 16 entries. This is called dithering, and VGA's limitations are a good opportunity to learn about dithering algorithms.
• VGA has an interesting memory layout. Most graphics devices use linear framebuffers, which store the pixels byte by byte. VGA uses 4 bitplanes instead. Plane 0 holds all bits 0 of all pixels. Plane 1 holds all bits 1 of all pixels, and so on.

The driver will probably not be useful to many people. But, if finished, it can serve as test environment for low-level hardware. There's some interest in supporting old Amiga and Atari framebuffers in DRM. Those systems have similar limitations as VGA, but are harder to obtain and test with. With qemu, the VGA driver could fill this gap.

Apart from the Wikipedia entry, good resources on VGA are at osdev.net and FreeVGA

Hacking on sched_ext by flonnegren

Description

Sched_ext upstream has some interesting issues open for grabs:

• core event counters
• topology: Use cpumasks

Goals

Send patches to sched_ext upstream

Also set up perfetto to trace some of the example schedulers.

Resources

https://github.com/sched-ext/scx

Create DRM drivers for VESA and EFI framebuffers by tdz

Description

We already have simpledrm for firmware framebuffers. But the driver is originally for ARM boards, not PCs. It is already overloaded with code to support both use cases. At the same time it is missing possible features for VESA and EFI, such as palette modes or EDID support. We should have DRM drivers for VESA and EFI interfaces. The infrastructure exists already and initial drivers can be forked from simpledrm.

Goals

• Initially, a bare driver for VESA or EFI should be created. It can take functionality from simpledrm.
• Then we can begin to add additional features. The boot loader can provide EDID data. With VGA hardware, VESA can support paletted modes or color management. Example code exists in vesafb.

Modularization and Modernization of cifs.ko for Enhanced SMB Protocol Support by hcarvalho

Creator:
Enzo Matsumiya ematsumiya@suse.de @ SUSE Samba team
Members:
Henrique Carvalho henrique.carvalho@suse.com @ SUSE Samba team

Description

Split cifs.ko in 2 separate modules; one for SMB 1.0 and 2.0.x, and another for SMB 2.1, 3.0, and 3.1.1.

Goals

Primary

Start phasing out/deprecation of older SMB versions

Secondary

• Clean up of the code (with focus on the newer versions)
• Update cifs-utils
• Update documentation
• Improve backport workflow (see below)

Technical details

Ideas for the implementation.

• fs/smb/client/{old,new}.c to generate the respective modules
  • Maybe don't create separate folders? (re-evaluate as things progresses!)
• Remove server->{ops,vals} if possible
• Clean up fs_context.* -- merge duplicate options into one, handle them in userspace utils
• Reduce code in smb2pdu.c -- tons of functions with very similar init/setup -> send/recv -> handle/free flow
• Restructure multichannel
  • Treat initial connection as "channel 0" regardless of multichannel enabled/negotiated status, proceed with extra channels accordingly
  • Extra channel just point to "channel 0" as the primary server, no need to allocate an extra TCPServerInfo for each one
• Authentication mechanisms
  • Modernize algorithms (references: himmelblau, IAKERB/Local KDC, SCRAM, oauth2 (Azure), etc.

Officially Become a Kernel Hacker! by m.crivellari

Description

My studies as well my spare time are dedicated to the Linux Kernel. Currently I'm focusing on interrupts on x86_64, but my interests are not restricted to one specific topic, for now.

I also "played" a little bit with kernel modules (ie lantern, a toy packet analyzer) and I've added a new syscall in order read from a task A, the memory of a task B.

Maybe this will be a good chance to...

Goals

• create my first kernel patch

Resources

• https://www.kernel.org/doc/html/latest/process/submitting-patches.html
• https://git-send-email.io/ (mentioned also in the kernel doc)
• https://javiercarrascocruz.github.io/kernel-contributor-1

Achivements

• found while working on a bug, this is the 1st patch: cifs: avoid deadlocks while updating iface [✅ has been merged]

SUSE Prague claw machine by anstalker

Project Description

The idea is to build a claw machine similar to e.g. this one:

Why? Well, it could be a lot of fun!

But also it's a great way to dispense SUSE and openSUSE merch like little Geekos at events like conferences, career fairs and open house events.

Goal for this Hackweek

Build an arcade claw machine.

Resources

In French, an article about why you always lose in claw machine games:

We're looking for handy/crafty people in the Prague office:

• woodworking XP or equipment
• arduino/raspi embedded programming knowledge
• Anthony can find a budget for going to GM and buying servos and such ;)

Create openSUSE images for Arm/RISC-V boards by avicenzi

Project Description

Create openSUSE images (or test generic EFI images) for Arm and/or RISC-V boards that are not yet supported.

Goal for this Hackweek

Create bootable images of Tumbleweed for SBCs that currently have no images available or are untested.

Consider generic EFI images where possible, as some boards can hold a bootloader.

Document in the openSUSE Wiki how to flash and use the image for a given board.

Boards that I have around and there are no images:

• Rock 3B
• Nano PC T3 Plus
• Lichee RV D1
• StartFive VisionFive (has some image needs testing)

Hack Week 22

• NanoPC T4

Hack Week 21

• NanoPi M4B
• Radxa Zero

Resources

• https://en.opensuse.org/Portal:Arm
• https://en.opensuse.org/Portal:RISC-V

Investigate non-booting Forlinx OKMX8MX-C board (aarch64) by a_faerber

Description

In the context of a SUSE customer inquiry last year, a Forlinx OKMX8MX-C arm64 board had been relayed to me from China that a customer was not successful booting SUSE Linux Micro on. Typically this happens when the vendor's bootloader (e.g., U-Boot) is not configured properly (e.g., U-Boot's distro boot) to be compliant with Arm SystemReady Devicetree (formerly IR) band. Unfortunately I could not immediately get it to emit any output, to even diagnose why it wasn't working. There was no public documentation on the vendor's website to even confirm I was checking the right UARTs.

Earlier this year (2024) I happened to meet the ODM/OEM, Forlinx, at Embedded World 2024 in Nuremberg and again the Monday before Hackweek 24 at Electronica 2024 in Munich. The big puzzle was that the PCB print "OKMX8MX-C" does not match any current Forlinx product, there being OKMX8MM-C and OKMX8MP-C products with the Mini and Plus variants of NXP i.MX 8M family instead. One suggestion from Forlinx staff was to double-check the DIP switches on the board for boot mode selection.

Goals

Double-check the board name and investigate further what may be wrong with this board.

Resources

none

Progress

• The board name is indeed as spelled above, not matching any product on forlinx.net.
• The DIP switches were set to boot from microSD.
• Changing the DIP switches to eMMC boot did result in UART1 RS-232 output! (although at times garbled with the cable supplied and USB adapter used)
• As feared, it did not automatically load our GRUB from USB.
• Booting our GRUB manually from USB (via eMMC U-Boot commands fatload+bootefi) was unsuccessful, with partially Chinese error messages.
• This confirmed the initial suspicion, already shared with Forlinx at Embedded World 2024, that the Forlinx System-on-Module's boot firmware was not Arm SystemReady Devicetree compliant and that a firmware update would be necessary to remedy that.
• The microSD card turned out not to contain a bootable image but to only include Chinese-language board documentation (dated 20220507) and BSP files. They used a diverging name of OKMX8MQ-C.

Improve various phones kernel mainline support (Qualcomm, Exynos, MediaTek) by pvorel

Similar to previous hackweeks ( https://hackweek.opensuse.org/projects/improve-qualcomm-soc-msm8994-slash-msm8992-kernel-mainline-support, https://hackweek.opensuse.org/projects/test-mainline-kernel-on-an-older-qualcomm-soc-msm89xx-explore-mainline-kernel-qualcomm-mainlining) try to improve kernel mainline support of various phones.

Improve various phones kernel mainline support (Qualcomm, Exynos, MediaTek) by pvorel

Similar to previous hackweeks ( https://hackweek.opensuse.org/projects/improve-qualcomm-soc-msm8994-slash-msm8992-kernel-mainline-support, https://hackweek.opensuse.org/projects/test-mainline-kernel-on-an-older-qualcomm-soc-msm89xx-explore-mainline-kernel-qualcomm-mainlining) try to improve kernel mainline support of various phones.

Improve various phones kernel mainline support (Qualcomm, Exynos, MediaTek) by pvorel

Similar to previous hackweeks ( https://hackweek.opensuse.org/projects/improve-qualcomm-soc-msm8994-slash-msm8992-kernel-mainline-support, https://hackweek.opensuse.org/projects/test-mainline-kernel-on-an-older-qualcomm-soc-msm89xx-explore-mainline-kernel-qualcomm-mainlining) try to improve kernel mainline support of various phones.

toptop - a top clone written in Go by dshah

Description

toptop is a clone of Linux's top CLI tool, but written in Go.

Goals

Learn more about Go (mainly bubbletea) and Linux

Resources

GitHub

Contributing to Linux Kernel security by pperego

Description

A couple of weeks ago, I found this blog post by Gustavo Silva, a Linux Kernel contributor.

I always strived to start again into hacking the Linux Kernel, so I asked Coverity scan dashboard access and I want to contribute to Linux Kernel by fixing some minor issues.

I want also to create a Linux Kernel fuzzing lab using qemu and syzkaller

Goals

1. Fix at least 2 security bugs
2. Create the fuzzing lab and having it running

The story so far

• Day 1: setting up a virtual machine for kernel development using Tumbleweed. Reading a lot of documentation, taking confidence with Coverity dashboard and with procedures to submit a kernel patch
• Day 2: I read really a lot of documentation and I triaged some findings on Coverity SAST dashboard. I have to confirm that SAST tool are great false positives generator, even for low hanging fruits.
• Day 3: Working on trivial changes after I read this blog post: https://www.toblux.com/posts/2024/02/linux-kernel-patches.html. I have to take confidence with the patch preparation and submit process yet.
  • First trivial patch sent: using strtruefalse() macro instead of hard-coded strings in a staging driver for a lcd display
  • Fix for a dereference before null check issue discovered by Coverity (CID 1601566) https://scan7.scan.coverity.com/#/project-view/52110/11354?selectedIssue=1601566
• Day 4: Triaging more issues found by Coverity.
  • The patch for CID 1601566 was refused. The check against the NULL pointer was pointless so I prepared a version 2 of the patch removing the check.
  • Fixed another dereference before NULL check in iwlmvmparsewowlaninfo_notif() routine (CID 1601547). This one was already submitted by another kernel hacker :(
• Day 5: Wrapping up. I had to do some minor rework on patch for CID 1601566. I found a stalker bothering me in private emails and people I interacted with me, advised he is a well known bothering person. Markus Elfring for the record.

• Wrapping up: being back doing kernel hacking is amazing and I don't want to stop it. My battery pack is completely drained but changing the scope gave me a great twist and I really want to feel this energy not doing a single task for months.

  I failed in setting up a fuzzing lab but I was too optimistic for the patch submission process.

The patches

1

Testing and adding GNU/Linux distributions on Uyuni by juliogonzalezgil

Join the Gitter channel! https://gitter.im/uyuni-project/hackweek

Uyuni is a configuration and infrastructure management tool that saves you time and headaches when you have to manage and update tens, hundreds or even thousands of machines. It also manages configuration, can run audits, build image containers, monitor and much more!

Currently there are a few distributions that are completely untested on Uyuni or SUSE Manager (AFAIK) or just not tested since a long time, and could be interesting knowing how hard would be working with them and, if possible, fix whatever is broken.

For newcomers, the easiest distributions are those based on DEB or RPM packages. Distributions with other package formats are doable, but will require adapting the Python and Java code to be able to sync and analyze such packages (and if salt does not support those packages, it will need changes as well). So if you want a distribution with other packages, make sure you are comfortable handling such changes.

No developer experience? No worries! We had non-developers contributors in the past, and we are ready to help as long as you are willing to learn. If you don't want to code at all, you can also help us preparing the documentation after someone else has the initial code ready, or you could also help with testing :-)

The idea is testing Salt and Salt-ssh clients, but NOT traditional clients, which are deprecated.

To consider that a distribution has basic support, we should cover at least (points 3-6 are to be tested for both salt minions and salt ssh minions):

1. Reposync (this will require using spacewalk-common-channels and adding channels to the .ini file)
2. Onboarding (salt minion from UI, salt minion from bootstrap scritp, and salt-ssh minion) (this will probably require adding OS to the bootstrap repository creator)
3. Package management (install, remove, update...)
4. Patching
5. Applying any basic salt state (including a formula)
6. Salt remote commands
7. Bonus point: Java part for product identification, and monitoring enablement
8. Bonus point: sumaform enablement (https://github.com/uyuni-project/sumaform)
9. Bonus point: Documentation (https://github.com/uyuni-project/uyuni-docs)
10. Bonus point: testsuite enablement (https://github.com/uyuni-project/uyuni/tree/master/testsuite)

If something is breaking: we can try to fix it, but the main idea is research how supported it is right now. Beyond that it's up to each project member how much to hack :-)

• If you don't have knowledge about some of the steps: ask the team
• If you still don't know what to do: switch to another distribution and keep testing.

This card is for EVERYONE, not just developers. Seriously! We had people from other teams helping that were not developers, and added support for Debian and new SUSE Linux Enterprise and openSUSE Leap versions :-)

Pending

FUSS

FUSS is a complete GNU/Linux solution (server, client and desktop/standalone) based on Debian for managing an educational network.

https://fuss.bz.it/

Seems to be a Debian 12 derivative, so adding it could be quite easy.

• [W] Reposync (this will require using spacewalk-common-channels and adding channels to the .ini file)
• [W] Onboarding (salt minion from UI, salt minion from bootstrap script, and salt-ssh minion) (this will probably require adding OS to the bootstrap repository creator) --> Working for all 3 options (salt minion UI, salt minion bootstrap script and salt-ssh minion from the UI).
• [W] Package management (install, remove, update...) --> Installing a new package works, needs to test the rest.
• [I] Patching (if patch information is available, could require writing some code to parse it, but IIRC we have support for Ubuntu already). No patches detected. Do we support patches for Debian at all?
• [W] Applying any basic salt state (including a formula)
• [W] Salt remote commands
• [ ] Bonus point: Java part for product identification, and monitoring enablement

VulnHeap by r1chard-lyu

Description

The VulnHeap project is dedicated to the in-depth analysis and exploitation of vulnerabilities within heap memory management. It focuses on understanding the intricate workflow of heap allocation, chunk structures, and bin management, which are essential to identifying and mitigating security risks.

Goals

• Familiarize with heap
  • Heap workflow
  • Chunk and bin structure
  • Vulnerabilities
• Vulnerability
  • Use after free (UAF)
  • Heap overflow
  • Double free
• Use Docker to create a vulnerable environment and apply techniques to exploit it

Resources

• https://heap-exploitation.dhavalkapil.com/divingintoglibc_heap
• https://raw.githubusercontent.com/cloudburst/libheap/master/heap.png
• https://github.com/shellphish/how2heap?tab=readme-ov-file

Explore simple and distro indipendent declarative Linux starting on Tumbleweed or Arch Linux by janvhs

Description

Inspired by mkosi the idea is to experiment with a declarative approach of defining Linux systems. A lot of tools already make it possible to manage the systems infrastructure by using description files, rather than manual invocation. An example for this are systemd presets for managing enabled services or the /etc/fstab file for describing how partitions should be mounted.

If we would take inspiration from openSUSE MicroOS and their handling of the /etc/ directory, we could theoretically use systemd-sysupdate to swap out the /usr/ partition and create an A/B boot scheme, where the /usr/ partition is always freshly built according to a central system description. In the best case it would be possible to still utilise snapshots, but an A/B root scheme would be sufficient for the beginning. This way you could get the benefit of NixOS's declarative system definition, but still use the distros package repositories and don't have to deal with the overhead of Flakes or the Nix language.

Goals

• A simple and understandable system
• Check fitness of mkosi or write a simple extensible image builder tool for it
• Create a declarative system specification
• Create a system with swappable /usr/ partition
• Create an A/B root scheme
• Swap to the new system without reboot (kexec?)

Resources

• Ideas that have been floating around in my head for a while
• https://0pointer.net/blog/fitting-everything-together.html
• GNOME OS
• MicroOS
• systemd mkosi
• Vanilla OS