openSUSE/SLE/Mainline U-boot for some not-yet-supported ARM64 boards
The Khadas VIM (http://khadas.com/vim/) is an arm64 DIY Set-Top-Box based on Amlogic P212 reference board that use S905X SoC.
As Odroid-C2 (based on S905 SoC) is in the mainline U-boot, it should be possible to adapt it for the Khadas VIM (of course a lot of work are needed!). It's also possible to try using the Amlogic code found in the 2015.01 version of U-Boot.
Also, Khadas VIM is supported in the mainline kernel, so when we will have a working U-Boot, installation and boot of openSUSE Tumbleweed with EFI should be possible.
The upgrade version, the VIM2, is based on an Amlogic S912 SoC, which is an upgraded version of the S905X SoC. Both are now supported in mainstream Linux Kernel (4.12 for Khadas VIM and next 4.14 for Khadas VIM2).
For me, the goal of this project is to better understand how U-boot and Amlogic SoCs are working (and also others boards!).
I'm pretty sure that my U-Boot version will not not work at the end of the week, but I hope that my knowledge of it will be improved!
Goal for HackWeek 19: - Refresh my U-Boot knowledge (didn't had enough spare time since the last HackWeek...) - Try to add openSUSE wiki page for AML-S805X-AC (first quick tests shown that TW is not booting, need to check why) - Try to work on ROC-RK3328-CC support (U-Boot and TW) - Help on packaging official BL31 ATF firmware for GXL (GXM supported?)
Goal for HackWeek 18: - Fix the USB U-Boot issue on VIM2 board (EDIT: done upstream) - Add other ARM64 boards: work on ROC-RK3328-CC (EDIT: still lot of issues...)
Update of 14 February 2020: - Patches to add ROC-RK3328-CC support in U-Boot done! Latest TW version doesn't boot correctly, I need to check why - Some tests has been done with AML-S805X-AC board: TW kernel boots but there are some kernel oops/panic on version 5.4. Bug created and I need to test later with kernel 5.5
Update of 13 July 2018: - Khadas VIM is working well with latest U-Boot version (a patch is still needed for USB boot) and latest openSUSE TW. Wikipage as been created for it and also for another SBC with pretty much the same hardware, the Libretech-CC. - My work will now focus on Khadas VIM2 board: U-boot is working with patches from BayLibre (apart USB), I found an issue with MMU initialization in U-Boot and I was able to fix it. Patch has been sent to Neil Armstrong of BayLibre for inclusion in his VIM2 patches.
Update for July 2018: - Board is working with official U-Boot and openSUSE TW. I will try to create add u-boot support for that board for TW and create and wiki page for openSUSE during HackWeek 17.
Update of 24 Octobre 2017: - Minimal U-Boot is booting on VIM board and EFI boot works, as openSUSE TW installation iso boots. I need to add needed modules to be able to install it.
Update of 12 October 2017: - U-Boot support is on a good way for P212 board, see https://patchwork.ozlabs.org/cover/825135/. Thanks to BayLibre guys! So I will use these patches to see if VIM can boot. First I will have a look at the code to better understand U-boot :)
No Hackers yet
This project is part of:
Hack Week 16 Hack Week 17 Hack Week 18 Hack Week 19
Activity
Comments
-
over 5 years ago by a_faerber | Reply
AFAIK we're still lacking an Open Source toolchain to build a bootable image for VIM (gxl) and VIM2 (gxm?). Maybe you could contribute to extending my meson-tools to allow more people to contribute to and benefit from your efforts?
Also, you might want to help package and test the new upstream BL31 in arm-trusted-firmware.
-
-
Similar Projects
Investigate non-booting Forlinx OKMX8MX-C board (aarch64) by a_faerber
Description
In the context of a SUSE customer inquiry last year, a Forlinx OKMX8MX-C arm64 board had been relayed to me from China that a customer was not successful booting SUSE Linux Micro on. Typically this happens when the vendor's bootloader (e.g., U-Boot) is not configured properly (e.g., U-Boot's distro boot) to be compliant with Arm SystemReady Devicetree (formerly IR) band. Unfortunately I could not immediately get it to emit any output, to even diagnose why it wasn't working. There was no public documentation on the vendor's website to even confirm I was checking the right UARTs.
Earlier this year (2024) I happened to meet the ODM/OEM, Forlinx, at Embedded World 2024 in Nuremberg and again the Monday before Hackweek 24 at Electronica 2024 in Munich. The big puzzle was that the PCB print "OKMX8MX-C" does not match any current Forlinx product, there being OKMX8MM-C and OKMX8MP-C products with the Mini and Plus variants of NXP i.MX 8M family instead. One suggestion from Forlinx staff was to double-check the DIP switches on the board for boot mode selection.
Goals
Double-check the board name and investigate further what may be wrong with this board.
Resources
none
Progress
- The board name is indeed as spelled above, not matching any product on forlinx.net.
- The DIP switches were set to boot from microSD.
- Changing the DIP switches to eMMC boot did result in UART1 RS-232 output! (although at times garbled with the cable supplied and USB adapter used)
- As feared, it did not automatically load our GRUB from USB.
- Booting our GRUB manually from USB (via eMMC U-Boot commands fatload+bootefi) was unsuccessful, with partially Chinese error messages.
- This confirmed the initial suspicion, already shared with Forlinx at Embedded World 2024, that the Forlinx System-on-Module's boot firmware was not Arm SystemReady Devicetree compliant and that a firmware update would be necessary to remedy that.
- The microSD card turned out not to contain a bootable image but to only include Chinese-language board documentation (dated 20220507) and BSP files. They used a diverging name of OKMX8MQ-C.
Improve various phones kernel mainline support (Qualcomm, Exynos, MediaTek) by pvorel
Similar to previous hackweeks ( https://hackweek.opensuse.org/projects/improve-qualcomm-soc-msm8994-slash-msm8992-kernel-mainline-support, https://hackweek.opensuse.org/projects/test-mainline-kernel-on-an-older-qualcomm-soc-msm89xx-explore-mainline-kernel-qualcomm-mainlining) try to improve kernel mainline support of various phones.
Investigate non-booting Forlinx OKMX8MX-C board (aarch64) by a_faerber
Description
In the context of a SUSE customer inquiry last year, a Forlinx OKMX8MX-C arm64 board had been relayed to me from China that a customer was not successful booting SUSE Linux Micro on. Typically this happens when the vendor's bootloader (e.g., U-Boot) is not configured properly (e.g., U-Boot's distro boot) to be compliant with Arm SystemReady Devicetree (formerly IR) band. Unfortunately I could not immediately get it to emit any output, to even diagnose why it wasn't working. There was no public documentation on the vendor's website to even confirm I was checking the right UARTs.
Earlier this year (2024) I happened to meet the ODM/OEM, Forlinx, at Embedded World 2024 in Nuremberg and again the Monday before Hackweek 24 at Electronica 2024 in Munich. The big puzzle was that the PCB print "OKMX8MX-C" does not match any current Forlinx product, there being OKMX8MM-C and OKMX8MP-C products with the Mini and Plus variants of NXP i.MX 8M family instead. One suggestion from Forlinx staff was to double-check the DIP switches on the board for boot mode selection.
Goals
Double-check the board name and investigate further what may be wrong with this board.
Resources
none
Progress
- The board name is indeed as spelled above, not matching any product on forlinx.net.
- The DIP switches were set to boot from microSD.
- Changing the DIP switches to eMMC boot did result in UART1 RS-232 output! (although at times garbled with the cable supplied and USB adapter used)
- As feared, it did not automatically load our GRUB from USB.
- Booting our GRUB manually from USB (via eMMC U-Boot commands fatload+bootefi) was unsuccessful, with partially Chinese error messages.
- This confirmed the initial suspicion, already shared with Forlinx at Embedded World 2024, that the Forlinx System-on-Module's boot firmware was not Arm SystemReady Devicetree compliant and that a firmware update would be necessary to remedy that.
- The microSD card turned out not to contain a bootable image but to only include Chinese-language board documentation (dated 20220507) and BSP files. They used a diverging name of OKMX8MQ-C.
Create openSUSE images for Arm/RISC-V boards by avicenzi
Project Description
Create openSUSE images (or test generic EFI images) for Arm and/or RISC-V boards that are not yet supported.
Goal for this Hackweek
Create bootable images of Tumbleweed for SBCs that currently have no images available or are untested.
Consider generic EFI images where possible, as some boards can hold a bootloader.
Document in the openSUSE Wiki how to flash and use the image for a given board.
Boards that I have around and there are no images:
- Rock 3B
- Nano PC T3 Plus
- Lichee RV D1
- StartFive VisionFive (has some image needs testing)
Hack Week 22
Hack Week 21
Resources
Improve UML page fault handler by ptesarik
Description
Improve UML handling of segmentation faults in kernel mode. Although such page faults are generally caused by a kernel bug, it is annoying if they cause an infinite loop, or panic the kernel. More importantly, a robust implementation allows to write KUnit tests for various guard pages, preventing potential kernel self-protection regressions.
Goals
Convert the UML page fault handler to use oops_* helpers, go through a few review rounds and finally get my patch series merged in 6.14.
Resources
Wrong initial attempt: https://lore.kernel.org/lkml/20231215121431.680-1-petrtesarik@huaweicloud.com/T/
Kill DMA and DMA32 memory zones by ptesarik
Description
Provide a better allocator for DMA-capable buffers, making the DMA and DMA32 zones obsolete.
Goals
Make a PoC kernel which can boot a x86 VM and a Raspberry Pi (because early RPi4 boards have some of the weirdest DMA constraints).
Resources
- LPC2024 talk:
- video:
Modularization and Modernization of cifs.ko for Enhanced SMB Protocol Support by hcarvalho
Creator:
Enzo Matsumiya ematsumiya@suse.de @ SUSE Samba team
Members:
Henrique Carvalho henrique.carvalho@suse.com @ SUSE Samba team
Description
Split cifs.ko in 2 separate modules; one for SMB 1.0 and 2.0.x, and another for SMB 2.1, 3.0, and 3.1.1.
Goals
Primary
Start phasing out/deprecation of older SMB versions
Secondary
- Clean up of the code (with focus on the newer versions)
- Update cifs-utils
- Update documentation
- Improve backport workflow (see below)
Technical details
Ideas for the implementation.
- fs/smb/client/{old,new}.c to generate the respective modules
- Maybe don't create separate folders? (re-evaluate as things progresses!)
- Remove server->{ops,vals} if possible
- Clean up fs_context.* -- merge duplicate options into one, handle them in userspace utils
- Reduce code in smb2pdu.c -- tons of functions with very similar init/setup -> send/recv -> handle/free flow
- Restructure multichannel
- Treat initial connection as "channel 0" regardless of multichannel enabled/negotiated status, proceed with extra channels accordingly
- Extra channel just point to "channel 0" as the primary server, no need to allocate an extra TCPServerInfo for each one
- Authentication mechanisms
- Modernize algorithms (references: himmelblau, IAKERB/Local KDC, SCRAM, oauth2 (Azure), etc.
FizzBuzz OS by mssola
Project Description
FizzBuzz OS (or just fbos) is an idea I've had in order to better grasp the fundamentals of the low level of a RISC-V machine. In practice, I'd like to build a small Operating System kernel that is able to launch three processes: one that simply prints "Fizz", another that prints "Buzz", and the third which prints "FizzBuzz". These processes are unaware of each other and it's up to the kernel to schedule them by using the timer interrupts as given on openSBI (fizz on % 3 seconds, buzz on % 5 seconds, and fizzbuzz on % 15 seconds).
This kernel provides just one system call, write, which allows any program to pass the string to be written into stdout.
This project is free software and you can find it here.
Goal for this Hackweek
- Better understand the RISC-V SBI interface.
- Better understand RISC-V in privileged mode.
- Have fun.
Resources
Results
The project was a resounding success 
Lots of learning, and the initial target was met.
Modernize ocfs2 by goldwynr
Ocfs2 has gone into a stage of neglect and disrepair. Modernize the code to generate enough interest.
Goals: * Change the mount sequence to use fscontext * Move from using bufferhead to bio/folios * Use iomap * Run it through xfstests