suse-rancher-supportconfig by eminguez

Description

Update: Live at https://github.com/e-minguez/suse-rancher-supportconfig I finally didn't used golang but used gum instead

SUSE's supportconfig support tool collects data from the SUSE Operating system. Rancher's rancher2_logs_collector.sh support tool does the same for RKE2/K3s.

Wouldn't be nice to have a way to run both and collect all data for SUSE based RKE2/K3s clusters? Wouldn't be even better with a fancy TUI tool like bubbletea?

Ideally the output should be an html page where you can see the logs/data directly from the browser.

Goals

• Familiarize myself with both supportconfig and rancher2_logs_collector.sh tools
• Refresh my golang knowledge
• Have something that works at the end of the hackweek ("works" may vary )
• Be better in naming things

Resources

All links provided above as well as huh

---

toptop - a top clone written in Go by dshah

Description

toptop is a clone of Linux's top CLI tool, but written in Go.

Goals

Learn more about Go (mainly bubbletea) and Linux

Resources

GitHub

---

OpenQA Golang api client by hilchev

Description

I would like to make a simple cli tool to communicate with the OpenQA API

Goals

• OpenQA has a ton of information that is hard to get via the UI. A tool like this would make my life easier :)
• Would potentially make it easier in the future to make UI changes without Perl.
• Improve my Golang skills

Resources

• https://go.dev/doc/
• https://openqa.opensuse.org/api

---

terraform-provider-feilong by e_bischoff

Project Description

People need to test operating systems and applications on s390 platform.

Installation from scratch solutions include:

• just deploy and provision manually (with the help of ftpboot script, if you are at SUSE)
• use s3270 terminal emulation (used by openQA people?)
• use LXC from IBM to start CP commands and analyze the results
• use zPXE to do some PXE-alike booting (used by the orthos team?)
• use tessia to install from scratch using autoyast
• use libvirt for s390 to do some nested virtualization on some already deployed z/VM system
• directly install a Linux kernel on a LPAR and use kvm + libvirt from there

Deployment from image solutions include:

• use ICIC web interface (openstack in disguise, contributed by IBM)
• use ICIC from the openstack terraform provider (used by Rancher QA)
• use zvm_ansible to control SMAPI
• connect directly to SMAPI low-level socket interface

IBM Cloud Infrastructure Center (ICIC) harnesses the Feilong API, but you can use Feilong without installing ICIC, provided you set up a "z/VM cloud connector" into one of your VMs following this schema.

What about writing a terraform Feilong provider, just like we have the terraform libvirt provider? That would allow to transparently call Feilong from your main.tf files to deploy and destroy resources on your system/z.

Other Feilong-based solutions include:

• make libvirt Feilong-aware
• simply call Feilong from shell scripts with curl
• use zvmconnector client python library from Feilong
• use zthin part of Feilong to directly command SMAPI.

Goal for Hackweek 23

My final goal is to be able to easily deploy and provision VMs automatically on a z/VM system, in a way that people might enjoy even outside of SUSE.

My technical preference is to write a terraform provider plugin, as it is the approach that involves the least software components for our deployments, while remaining clean, and compatible with our existing development infrastructure.

Goals for Hackweek 24

Feilong provider works and is used internally by SUSE Manager team. Let's push it forward!

Let's add support for fiberchannel disks and multipath.

Goals for Hackweek 25

• Finish support for fiberchannel disks and multipath
• Fix problems with registration on hashicorp providers registry

---

Jenny Static Site Generator by adam.pickering

Description

For my personal site I have been using hugo. It works, but I am not satisfied: every time I want to make a change (which is infrequently) I have to read through the documentation again to understand how hugo works. I don't find the documentation easy to use, and the structure of the repository that hugo requires is unintuitive/more complex than what I need. So, I have decided to write my own simple static site generator in Go. It is named Jenny, after my wife.

Goals

• Pages can be written in markdown (which is automatically converted to HTML), but other file types are also allowed
• Easy to understand and use
  • Intuitive, simple design
  • Clear documentation
  • Hot reloading
  • Binaries provided for download
• Future maintenance is easy
  • Automated releases

Resources

https://github.com/adamkpickering/jenny

---

toptop - a top clone written in Go by dshah

Description

toptop is a clone of Linux's top CLI tool, but written in Go.

Goals

Learn more about Go (mainly bubbletea) and Linux

Resources

GitHub

---

WebUI for your data by avicenzi

A single place to view every bit of data you have.

Problem

You have too much data and you are a data hoarder.

• Family photos and videos.
• Lots of eBooks, TV Shows, Movies, and else.
• Boxes full of papers (taxes, invoices, IDs, certificates, exams, and else).
• Bank account statements (multiple currencies, countries, and people).

Maybe you have some data on S3, some on your NAS, and some on your local PC.

• How do you get it all together?
• How do you link a bank transaction to a product invoice?
• How to tag any object type and create a collection out of it (mix videos, photos, PDFs, transactions)?
• How to store this? file/folder structure does not work, everything is linked together

Project Description

The idea is a place where you can throw all your data, photos, videos, documents, binaries, and else.

Create photo albums, document collections, add tags across multiple file-formats, link content, and else.

The UI should be easy to use, where the data is not important for now (could be all S3 or local drive).

Similar proposals

The closest I found so far is https://perkeep.org/, but this is not what I'm looking for.

Goal for this Hackweek

Create a web UI, in Svelte ideally, perhaps React.

It should be able to show photos and videos at least.

Resources

None so far, this is just an idea.

---

ddflare: (Dynamic)DNS management via Cloudflare API in Kubernetes by fgiudici

Description

ddflare is a project started a couple of weeks ago to provide DDNS management using v4 Cloudflare APIs: Cloudflare offers management via APIs and access tokens, so it is possible to register a domain and implement a DynDNS client without any other external service but their API.

Since ddflare allows to set any IP to any domain name, one could manage multiple A and ALIAS domain records. Wouldn't be cool to allow full DNS control from the project and integrate it with your Kubernetes cluster?

Goals

Main goals are:

1. add containerized image for ddflare
2. extend ddflare to be able to add and remove DNS records (and not just update existing ones)
3. add documentation, covering also a sample pod deployment for Kubernetes
4. write a ddflare Kubernetes operator to enable domain management via Kubernetes resources (using kubebuilder)

Available tasks and improvements tracked on ddflare github.

Resources

• https://github.com/fgiudici/ddflare
• https://developers.cloudflare.com/api/
• https://book.kubebuilder.io

---

Cluster API Provider for Harvester by rcase

Project Description

The Cluster API "infrastructure provider" for Harvester, also named CAPHV, makes it possible to use Harvester with Cluster API. This enables people and organisations to create Kubernetes clusters running on VMs created by Harvester using a declarative spec.

The project has been bootstrapped in HackWeek 23, and its code is available here.

Work done in HackWeek 2023

• Have a early working version of the provider available on Rancher Sandbox : *DONE *
• Demonstrated the created cluster can be imported using Rancher Turtles: DONE
• Stretch goal - demonstrate using the new provider with CAPRKE2: DONE and the templates are available on the repo

Goals for HackWeek 2024

• Add support for ClusterClass
• Add e2e testing
• Add more Unit Tests
• Improve Status Conditions to reflect current state of Infrastructure
• Improve CI (some bugs for release creation)
• Testing with newer Harvester version (v1.3.X and v1.4.X)
• Due to the length and complexity of the templates, maybe package some of them as Helm Charts.
• Other improvement suggestions are welcome!

DONE in HackWeek 24:

• Add more Unit Tests
• Improve Status Conditions for some phases
• Add cloud provider config generation
• Testing with Harvester v1.3.2
• Template improvements
• Issues creation

Thanks to @isim and Dominic Giebert for their contributions!

Resources

Looking for help from anyone interested in Cluster API (CAPI) or who wants to learn more about Harvester.

This will be an infrastructure provider for Cluster API. Some background reading for the CAPI aspect:

• Cluster infrastructure provider contract
• Machine infrastructure provider contract
• Provider implementers guide

---

A CLI for Harvester by mohamed.belgaied

[comment]: # Harvester does not officially come with a CLI tool, the user is supposed to interact with Harvester mostly through the UI [comment]: # Though it is theoretically possible to use kubectl to interact with Harvester, the manipulation of Kubevirt YAML objects is absolutely not user friendly. [comment]: # Inspired by tools like multipass from Canonical to easily and rapidly create one of multiple VMs, I began the development of Harvester CLI. Currently, it works but Harvester CLI needs some love to be up-to-date with Harvester v1.0.2 and needs some bug fixes and improvements as well.

Project Description

Harvester CLI is a command line interface tool written in Go, designed to simplify interfacing with a Harvester cluster as a user. It is especially useful for testing purposes as you can easily and rapidly create VMs in Harvester by providing a simple command such as: harvester vm create my-vm --count 5 to create 5 VMs named my-vm-01 to my-vm-05.

Harvester CLI is functional but needs a number of improvements: up-to-date functionality with Harvester v1.0.2 (some minor issues right now), modifying the default behaviour to create an opensuse VM instead of an ubuntu VM, solve some bugs, etc.

Github Repo for Harvester CLI: https://github.com/belgaied2/harvester-cli

Done in previous Hackweeks

• Create a Github actions pipeline to automatically integrate Harvester CLI to Homebrew repositories: DONE
• Automatically package Harvester CLI for OpenSUSE / Redhat RPMs or DEBs: DONE

Goal for this Hackweek

The goal for this Hackweek is to bring Harvester CLI up-to-speed with latest Harvester versions (v1.3.X and v1.4.X), and improve the code quality as well as implement some simple features and bug fixes.

Some nice additions might be: * Improve handling of namespaced objects * Add features, such as network management or Load Balancer creation ? * Add more unit tests and, why not, e2e tests * Improve CI * Improve the overall code quality * Test the program and create issues for it

Issue list is here: https://github.com/belgaied2/harvester-cli/issues

Resources

The project is written in Go, and using client-go the Kubernetes Go Client libraries to communicate with the Harvester API (which is Kubernetes in fact). Welcome contributions are:

• Testing it and creating issues
• Documentation
• Go code improvement

What you might learn

Harvester CLI might be interesting to you if you want to learn more about:

• GitHub Actions
• Harvester as a SUSE Product
• Go programming language
• Kubernetes API

---