Tumbleweed on Mars-CM (RISC-V board)
RISC-V is awesome, Tumbleweed is awesome, chocolate cake is awesome. I'm planning to combine all of them in one project.
Project Description
I recently purchased a MILK-V Mars CM and managed to setup it up already using Debian Linux. My project for this Hackweek is to see how far I can get to run Tumbleweed on this compute module board.
Goal for this Hackweek
- Run Tumbleweed on the Compute Module
Resources
- http://milkv.io/mars-cm
- https://en.opensuse.org/HCL:VisionFive2
Looking for hackers with the skills:
This project is part of:
Hack Week 23 Hack Week 24 Hack Week 25
Activity
Comments
-
-
about 2 years ago by ph03nix | Reply
I'm trying to flash the openSUSE Tumbleweed image for the VisionFive2 to my eMMC Mars CM and am a bit stuck there: https://community.milkv.io/t/how-to-flash-the-emmc-on-the-mars-cm/854/3
-
-
-
-
-
-
-
-
-
-
Reply to ph03nix
I managed to build and flash a new U-Boot. With this I can reach GRUB via UEFI on our Tumbleweed images for the VisionFive Starfive2 
# A First Level Header ## A Second Level Header Use one asterisk to *emphasize* Use two asterisks for **strong emphasis** - Use hyphens - for unordereed - lists This is an [link to example.com](http://example.com/) This is an image  This is a user link @hans This is a project link hw#some-cool-title
Similar Projects
Create openSUSE images for Arm and RISC-V boards by avicenzi
Project Description
Create openSUSE images (or test generic EFI images) for Arm and RISC-V boards that are not yet supported.
Goal for Hackweek
Create bootable images of Tumbleweed for SBCs that currently have no images available or are untested.
Consider generic EFI images where possible, as some boards can hold a bootloader.
Document in the openSUSE Wiki how to flash and use the image for a given board.
Hack Week 25
Hack Week 24
Hack Week 23
Hack Week 22
Hack Week 21
Resources
Reassess HiFive Premier P550 board (for RISC-V virtualization) by a_faerber
Description
With growing interest in the RISC-V instruction set architecture, we need to re-evaluate ways of building packages for it:
Currently openSUSE OBS is using x86_64 build workers, using QEMU userspace-level (syscall) emulation inside KVM VMs. Occasionally this setup causes build failures, due to timing differences or incomplete emulation. Andreas Schwab and others have collected workarounds in projects like openSUSE:Factory:RISCV to deal with some of those issues.
Ideally we would be using native riscv64 KVM VMs instead. This requires CPUs with the H extension. Two generally available development boards feature the ESWIN 7700X System-on-Chip with SiFive P550 CPUs, HiFive Premier P550 and Milk-V Megrez. We've had access to the HiFive Premier P550 for some time now, but the early version (based on Yocto) had issues with the bootloader, and reportedly later boards were booting to a dracut emergency shell for lack of block device drivers.
Goals
- Update the boot firmware
- Test whether and how far openSUSE Tumbleweed boots
Results
- Boot firmware image 2025.11.00 successfully flashed onto board
- Enables UEFI boot in U-Boot by default
- U-Boot's embedded Flat Device Tree is lacking a timebase-frequency, required for recent (6.16.3) mainline kernels (panic leading to reset, visible via earlycon=sbi)
- Tested eswin/eic7700-hifive-premier-p550.dtb from Ubuntu 2025.11.00 image
- Allows to boot past the above panic, but times out in JeOS image while waiting for block device, dropping to dracut emergency shell
- No devices shown in lsblk -- 6.16 appears to be lacking device drivers still
Resources
pudc - A PID 1 process that barks to the internet by mssola
Description
As a fun exercise in order to dig deeper into the Linux kernel, its interfaces, the RISC-V architecture, and all the dragons in between; I'm building a blog site cooked like this:
- The backend is written in a mixture of C and RISC-V assembly.
- The backend is actually PID1 (for real, not within a container).
- We poll and parse incoming HTTP requests ourselves.
- The frontend is a mere HTML page with htmx.
The project is meant to be Linux-specific, so I'm going to use io_uring, pidfs, namespaces, and Linux-specific features in order to drive all of this.
I'm open for suggestions and so on, but this is meant to be a solo project, as this is more of a learning exercise for me than anything else.
Goals
- Have a better understanding of different Linux features from user space down to the kernel internals.
- Most importantly: have fun.
Resources
OpenRC in openSUSE by jimedrand
Description
I have been using openSUSE for 3 years and I am just seen the systemd as init system. Actually, I want to make openSUSE with supports to another init such as OpenRC init that I'm always using it in another distros, and I was think, "what about if I'm including OpenRC init in openSUSE and give anyone as second way for them who don't want to use systemd?", and I'm curious about that. That's why I'm opening these.
Goals
Giving OpenRC support for Tumbleweed first, then going in Leap in future if possible.