Deploying software.opensuse.org
a project by dmacvicar
Updated almost 3 years ago. 6 hacker ♥️.

After an internal call for help to take over software.opensuse.org deployment, I spend some time studying the code in order to find out what would it mean to take it over.

The main reason was a PR from the community that has not been merged, and deployment depending on internal SUSE employees. I discovered (or at least I did not found evidence of the contrary), there is no need for this machine to be internal, as it uses the API.

On the other hand, the deployment is using rpm for gems, and it is quite tied to the setup of a virtual machine, all these things are nice for a sysadmin but not so nice for a developer.

I forked it, merged the new theme and fixed a few bugs: repo On the way, I also enabled it to be deployed on PaaS: Heroku, SUSE CAP (Cloud Foundry), etc.

So the goal of this project would be to:

  • Find if the stakeholders would be ok with a different deployment mechanism. At least something not sysadmin-centric.
  • If this is not feasible, still see if deployment can be improved. nginx, no rpm for Gems, etc.
  • Build a small group of people willing to learn by taking over this piece.
  • If all goes good, take over the responsibility of this component.

Outcome

software.opensuse.org has been refactored, cleaned up, updated to Rails 5, added tests, etc.

The testsuite runs on every Pull Request, and we are very very close to automated deployment.

Join this project

Looking for hackers with the skills:

opensuse rails rubyonrails ror ruby web webapps

This project is part of:

Hack Week 16

Activity

  • about 7 years ago: pgonin liked this project.
  • about 7 years ago: ancorgs liked this project.
  • about 7 years ago: hennevogel liked this project.
  • about 7 years ago: cschum liked this project.
  • about 7 years ago: dmacvicar started this project.
  • about 7 years ago: cbruckmayer liked this project.
  • about 7 years ago: dmaiocchi liked this project.
  • about 7 years ago: dmacvicar added keyword "ror" to this project.
  • about 7 years ago: dmacvicar added keyword "ruby" to this project.
  • about 7 years ago: dmacvicar added keyword "web" to this project.
  • about 7 years ago: dmacvicar added keyword "webapps" to this project.
  • about 7 years ago: dmacvicar added keyword "opensuse" to this project.
  • about 7 years ago: dmacvicar added keyword "rails" to this project.
  • about 7 years ago: dmacvicar added keyword "rubyonrails" to this project.
  • about 7 years ago: dmacvicar originated this project.


    • Comments

    • TBro
      about 7 years ago by TBro | Reply

      Talk with eachother might be a good start: https://hackweek.suse.com/projects/improve-the-opensuse-infrastructure

    • lnussel
      about 7 years ago by lnussel | Reply

      So did you have a chance to work on this?

    Similar Projects

    Digital art wallpapers for openSUSE Leap and Tumbleweed by lkocman

    Description

    We've enrolled set of new wallpapers to both Leap 16 and Tumbleweed as part of https://news.opensuse.org/2024/10/26/leap-tw-get-makeovers/

    We've previewed digital art wallpapers which were not part of the initial drop. I'd like to spend time on hackweek to finialize my current Taipei (mountains) and Mauritius digital art wallpapers.

    Goals

    Finalize existing two digital art wallpapers for Leap and Tumbleweed https://github.com/openSUSE/branding/issues/155 Make them available as part of leap16 dir in https://github.com/openSUSE/wallpapers and update (This makes is available to Tumbleweed users as well). Update https://build.opensuse.org/package/show/X11:common:Factory/wallpapers-openSUSE-extra && Leap:16.0 && Factory.

    Resources

    https://github.com/openSUSE/branding/issues/155 The mauritius draft can be found in https://github.com/lkocman/geo-wallpapers

    Update Haskell ecosystem in Tumbleweed to GHC-9.10.x by psimons

    Description

    We are currently at GHC-9.8.x, which a bit old. So I'd like to take a shot at the latest version of the compiler, GHC-9.10.x. This is gonna be interesting because the new version requires major updates to all kinds of libraries and base packages, which typically means patching lots of packages to make them build again.

    Goals

    Have working builds of GHC-9.10.x and the required Haskell packages in 'devel:languages:haskell` so that we can compile:

    • git-annex
    • pandoc
    • xmonad
    • cabal-install

    Resources

    • https://build.opensuse.org/project/show/devel:languages:haskell/
    • https://github.com/opensuse-haskell/configuration/
    • #discuss-haskell
    • https://www.twitch.tv/peti343

    Create openSUSE images for Arm/RISC-V boards by avicenzi

    Project Description

    Create openSUSE images (or test generic EFI images) for Arm and/or RISC-V boards that are not yet supported.

    Goal for this Hackweek

    Create bootable images of Tumbleweed for SBCs that currently have no images available or are untested.

    Consider generic EFI images where possible, as some boards can hold a bootloader.

    Document in the openSUSE Wiki how to flash and use the image for a given board.

    Boards that I have around and there are no images:

    • Rock 3B
    • Nano PC T3 Plus
    • Lichee RV D1
    • StartFive VisionFive (has some image needs testing)

    Hack Week 22

    Hack Week 21

    Resources

    YQPkg - Bringing the Single Package Selection Back to Life by shundhammer

    tl;dr

    Rip out the high-level YQPackageSelector widget from YaST and make it a standalone Qt program without any YaST dependencies.

    See section "Result" at the bottom for the current status after the hack week.

    Current Status

    See the development status issue at the GitHub repo.

    tl;dr: It's usable now with all the key features.

    It does real package installation / removal / update with reasonable user feedback.

    The Past and the Present

    We used to have and still have a powerful software selection with the YaST sw_single module (and the YaST patterns counterpart): You can select software down to the package level, you can easily select one of many available package versions, you can select entire patterns - or just view them and pick individual packages from patterns.

    You can search packages based on name, description, "requires" or "provides" level, and many more things.

    The Future

    YaST is on its way out, to be replaced by the new Agama installer and Cockpit for system administration. Those tools can do many things, but fine-grained package selection is not among them. And there are also no other Open Source tools available for that purpose that even come close to the YaST package selection.

    Many aspects of YaST have become obsolete over the years; many subsystems now come with a good default configuration, or they can configure themselves automatically. Just think about sound or X11 configuration; when did you last need to touch them?

    For others, the desktops bring their own tools (e.g. printers), or there are FOSS configuration tools (NetworkManager, BlueMan). Most YaST modules are no longer needed, and for many others there is a replacement in tools like Cockpit.

    But no longer having a powerful fine-grained package selection like in YaST sw_single will hurt. Big time. At least until there is an adequate replacement, many users will want to keep it.

    The Idea

    YaST sw_single always revolved around a powerful high-level widget on the abstract UI level. Libyui has low-level widgets like YPushButton, YCheckBox, YInputField, more advanced ones like YTable, YTree; and some few very high-level ones like YPackageSelector and YPatternSelector that do the whole package selection thing alone, working just on the libzypp level and changing the status of packages or patterns there.

    For the YaST Qt UI, the YQPackageSelector / YQPatternSelector widgets work purely on the Qt and libzypp level; no other YaST infrastructure involved, in particular no Ruby (or formerly YCP) interpreter, no libyui-level widgets, no bindings between Qt / C++ and Ruby / YaST-core, nothing. So it's not too hard to rip all that part out of YaST and create a standalone program from it.

    For the NCurses UI, the NCPackageSelector / NCPatternSelector create a lot of libyui widgets (inheriting YWidget / NCWidget) and use a lot of libyui calls to glue them together; and all that of course still needs a lot of YaST / libyui / libyui-ncurses infrastructure. So NCurses is out of scope here.

    Preparatory Work: Initializing the Package Subsystem

    To see if this is feasible at all, the existing UI examples needed some fixing to check what is needed on that level. That was the make-or-break decision: Would it be realistically possible to set the needed environment in libzypp up (without being stranded in the middle of that task alone at the end of the hack week)?

    Yes, it is: That part is already working:

    https://github.com/yast/yast-ycp-ui-bindings/pull/71

    New openSUSE-welcome by lkocman

    Project Description

    Let's revisit our existing openSUSE welcome app.

    My goal was to show Leap 16 in a new coat. Welcome app adds to the first time use experience. We've recently added donation button to our existing welcome.

    Some things that I recently wanted to address were EOL and possibly upgrade notification.

    I've already done some experiments with mint welcome app, but not sure if it's better than the existing one.

    There is also a PR to rework existing app https://github.com/openSUSE/openSUSE-welcome/pull/36 (this should be considered as an option too)

    Goal for this Hackweek

    New welcome app, possibly with EOL notification for Leap.

    1) Welcome application(s) with (rebrand changes) maintained under github.com/openSUSE

    2) Application is submitted to openSUSE:Factory && openSUSE:Leap:16.0

    3) Updated needles in openQA (probably post hackweek)

    Resources

    Reddit discussion about the best welcome app out there.

    Github repo for the current welcome app.

    Use local/private LLM for semantic knowledge search by digitaltomm

    Description

    Use a local LLM, based on SUSE AI (ollama, openwebui) to power geeko search (public instance: https://geeko.port0.org/).

    Goals

    Build a SUSE internal instance of https://geeko.port0.org/ that can operate on internal resources, crawling confluence.suse.com, gitlab.suse.de, etc.

    Resources

    Repo: https://github.com/digitaltom/semantic-knowledge-search

    Public instance: https://geeko.port0.org/

    Results

    Internal instance:

    I have an internal test instance running which has indexed a couple of internal wiki pages from the SCC team. It's using the ollama (llama3.1:8b) backend of suse-ai.openplatform.suse.com to create embedding vectors for indexed resources and to create a chat response. The semantic search for documents is done with a vector search inside of sqlite, using sqlite-vec.

    image

    Recipes catalog and calculator in Rails 8 by gfilippetti

    My wife needs a website to catalog and sell the products of her upcoming bakery, and I need to learn and practice modern Rails. So I'm using this Hack Week to build a modern store using the latest Ruby on Rails best practices, ideally up to the deployment.

    TO DO

    • Index page
    • Product page
    • Admin area -- Supplies calculator based on orders -- Orders notification
    • Authentication
    • Payment
    • Deployment

    Day 1

    As my Rails knowledge was pretty outdated and I had 0 experience with Turbo (wich I want to use in the app), I started following a turbo-rails course. I completed 5 of 11 chapters.

    Day 2

    Continued the course until chapter 8 and added live updates & an empty state to the app. I should finish the course on day 3 and start my own project with the knowledge from it.

    Hackweek 24

    For this Hackweek I'll continue this project, focusing on a Catalog/Calculator for my wife's recipes so she can use for her Café.

    Day 1

    Fix RSpec tests in order to replace the ruby-ldap rubygem in OBS by enavarro_suse

    Description

    "LDAP mode is not official supported by OBS!". See: config/options.yml.example#L100-L102

    However, there is an RSpec file which tests LDAP mode in OBS. These tests use the ruby-ldap rubygem, mocking the results returned by a LDAP server.

    The ruby-ldap rubygem seems no longer maintaned, and also prevents from updating to a more recent Ruby version. A good alternative is to replace it with the net-ldap rubygem.

    Before replacing the ruby-ldap rubygem, we should modify the tests so the don't mock the responses of a LDAP server. Instead, we should modify the tests and run them against a real LDAP server.

    Goals

    Goals of this project:

    • Modify the RSpec tests and run them against a real LDAP server
    • Replace the net-ldap rubygem with the ruby-ldap rubygem

    Achieving the above mentioned goals will:

    • Permit upgrading OBS from Ruby 3.1 to Ruby 3.2
    • Make a step towards officially supporting LDAP in OBS.

    Resources

    Fix RSpec tests in order to replace the ruby-ldap rubygem in OBS by enavarro_suse

    Description

    "LDAP mode is not official supported by OBS!". See: config/options.yml.example#L100-L102

    However, there is an RSpec file which tests LDAP mode in OBS. These tests use the ruby-ldap rubygem, mocking the results returned by a LDAP server.

    The ruby-ldap rubygem seems no longer maintaned, and also prevents from updating to a more recent Ruby version. A good alternative is to replace it with the net-ldap rubygem.

    Before replacing the ruby-ldap rubygem, we should modify the tests so the don't mock the responses of a LDAP server. Instead, we should modify the tests and run them against a real LDAP server.

    Goals

    Goals of this project:

    • Modify the RSpec tests and run them against a real LDAP server
    • Replace the net-ldap rubygem with the ruby-ldap rubygem

    Achieving the above mentioned goals will:

    • Permit upgrading OBS from Ruby 3.1 to Ruby 3.2
    • Make a step towards officially supporting LDAP in OBS.

    Resources

    Recipes catalog and calculator in Rails 8 by gfilippetti

    My wife needs a website to catalog and sell the products of her upcoming bakery, and I need to learn and practice modern Rails. So I'm using this Hack Week to build a modern store using the latest Ruby on Rails best practices, ideally up to the deployment.

    TO DO

    • Index page
    • Product page
    • Admin area -- Supplies calculator based on orders -- Orders notification
    • Authentication
    • Payment
    • Deployment

    Day 1

    As my Rails knowledge was pretty outdated and I had 0 experience with Turbo (wich I want to use in the app), I started following a turbo-rails course. I completed 5 of 11 chapters.

    Day 2

    Continued the course until chapter 8 and added live updates & an empty state to the app. I should finish the course on day 3 and start my own project with the knowledge from it.

    Hackweek 24

    For this Hackweek I'll continue this project, focusing on a Catalog/Calculator for my wife's recipes so she can use for her Café.

    Day 1

    WebUI for your data by avicenzi

    A single place to view every bit of data you have.

    Problem

    You have too much data and you are a data hoarder.

    • Family photos and videos.
    • Lots of eBooks, TV Shows, Movies, and else.
    • Boxes full of papers (taxes, invoices, IDs, certificates, exams, and else).
    • Bank account statements (multiple currencies, countries, and people).

    Maybe you have some data on S3, some on your NAS, and some on your local PC.

    • How do you get it all together?
    • How do you link a bank transaction to a product invoice?
    • How to tag any object type and create a collection out of it (mix videos, photos, PDFs, transactions)?
    • How to store this? file/folder structure does not work, everything is linked together

    Project Description

    The idea is a place where you can throw all your data, photos, videos, documents, binaries, and else.

    Create photo albums, document collections, add tags across multiple file-formats, link content, and else.

    The UI should be easy to use, where the data is not important for now (could be all S3 or local drive).

    Similar proposals

    The closest I found so far is https://perkeep.org/, but this is not what I'm looking for.

    Goal for this Hackweek

    Create a web UI, in Svelte ideally, perhaps React.

    It should be able to show photos and videos at least.

    Resources

    None so far, this is just an idea.

    Cobbler Angular Web Interface by SchoolGuy

    Project Description

    The old Cobbler webinterface was built into the server, leading to a huge dependency stack only required for a few people.

    Goal for this Hackweek

    The project should aim to finalize the first prototype of the new Angular based web interface.

    A secondary goal of this hackweek is to learn a lot of Angular.

    Update for Hackweek 24

    The GH project received some traction since I have some vacation. As such it is my aim to get a first alpha released to close the milestone 0.0.1 (or whatever version I can release with semantic release).

    Resources

    WebUI for your data by avicenzi

    A single place to view every bit of data you have.

    Problem

    You have too much data and you are a data hoarder.

    • Family photos and videos.
    • Lots of eBooks, TV Shows, Movies, and else.
    • Boxes full of papers (taxes, invoices, IDs, certificates, exams, and else).
    • Bank account statements (multiple currencies, countries, and people).

    Maybe you have some data on S3, some on your NAS, and some on your local PC.

    • How do you get it all together?
    • How do you link a bank transaction to a product invoice?
    • How to tag any object type and create a collection out of it (mix videos, photos, PDFs, transactions)?
    • How to store this? file/folder structure does not work, everything is linked together

    Project Description

    The idea is a place where you can throw all your data, photos, videos, documents, binaries, and else.

    Create photo albums, document collections, add tags across multiple file-formats, link content, and else.

    The UI should be easy to use, where the data is not important for now (could be all S3 or local drive).

    Similar proposals

    The closest I found so far is https://perkeep.org/, but this is not what I'm looking for.

    Goal for this Hackweek

    Create a web UI, in Svelte ideally, perhaps React.

    It should be able to show photos and videos at least.

    Resources

    None so far, this is just an idea.