The goal of Project MySelf is to build a system to collect data about yourself in a safe and private way, so that you control your data and you can decide what happens with it.
Looking for hackers with the skills:
ruby go gpg security privacy self-tracking quantifiedself iot qt d3.js
This project is part of:
Hack Week 11 Hack Week 12
Activity
Comments
-
about 10 years ago by cschum | Reply
There is progress: The server is alive and can take and give data: Code on GitHub
-
about 10 years ago by cschum | Reply
I did a server in Go, a client in Ruby, and visualization in Python. There still is a lot to do, but it is a great start and I have accomplished the goal of being able to track data and store it in the cloud without having to trust the cloud. More will come later...
-
over 9 years ago by cschum | Reply
Added two more programming languages to the mix and created a graphical client in C++, which uses Javascript to visualize data. The client is still very much work in progress, only works with special hand-holding right now.
Similar Projects
Fix RSpec tests in order to replace the ruby-ldap rubygem in OBS by enavarro_suse
Description
"LDAP mode is not official supported by OBS!". See: config/options.yml.example#L100-L102
However, there is an RSpec file which tests LDAP mode in OBS. These tests use the ruby-ldap
rubygem, mocking the results returned by a LDAP server.
The ruby-ldap
rubygem seems no longer maintaned, and also prevents from updating to a more recent Ruby version. A good alternative is to replace it with the net-ldap
rubygem.
Before replacing the ruby-ldap
rubygem, we should modify the tests so the don't mock the responses of a LDAP server. Instead, we should modify the tests and run them against a real LDAP server.
Goals
Goals of this project:
- Modify the RSpec tests and run them against a real LDAP server
- Replace the
net-ldap
rubygem with theruby-ldap
rubygem
Achieving the above mentioned goals will:
- Permit upgrading OBS from Ruby 3.1 to Ruby 3.2
- Make a step towards officially supporting LDAP in OBS.
Resources
Recipes catalog and calculator in Rails 8 by gfilippetti
My wife needs a website to catalog and sell the products of her upcoming bakery, and I need to learn and practice modern Rails. So I'm using this Hack Week to build a modern store using the latest Ruby on Rails best practices, ideally up to the deployment.
TO DO
- Index page
- Product page
- Admin area -- Supplies calculator based on orders -- Orders notification
- Authentication
- Payment
- Deployment
Day 1
As my Rails knowledge was pretty outdated and I had 0 experience with Turbo (wich I want to use in the app), I started following a turbo-rails course. I completed 5 of 11 chapters.
Day 2
Continued the course until chapter 8 and added live updates & an empty state to the app. I should finish the course on day 3 and start my own project with the knowledge from it.
Hackweek 24
For this Hackweek I'll continue this project, focusing on a Catalog/Calculator for my wife's recipes so she can use for her Café.
Day 1
ddflare: (Dynamic)DNS management via Cloudflare API in Kubernetes by fgiudici
Description
ddflare is a project started a couple of weeks ago to provide DDNS management using v4 Cloudflare APIs: Cloudflare offers management via APIs and access tokens, so it is possible to register a domain and implement a DynDNS client without any other external service but their API.
Since ddflare allows to set any IP to any domain name, one could manage multiple A and ALIAS domain records. Wouldn't be cool to allow full DNS control from the project and integrate it with your Kubernetes cluster?
Goals
Main goals are:
- add containerized image for ddflare
- extend ddflare to be able to add and remove DNS records (and not just update existing ones)
- add documentation, covering also a sample pod deployment for Kubernetes
- write a ddflare Kubernetes operator to enable domain management via Kubernetes resources (using kubebuilder)
Available tasks and improvements tracked on ddflare github.
Resources
- https://github.com/fgiudici/ddflare
- https://developers.cloudflare.com/api/
- https://book.kubebuilder.io
Hack on rich terminal user interfaces by amanzini
Description
TUIs (Textual User Interface) are a big classic of our daily workflow. Many linux users 'live' in the terminal and modern implementations have a lot to offer : unicode fonts, 24 bit colors etc.
Goals
- Explore the current available solution on modern languages and implement a PoC , for example a small maze generator, porting of a classic game or just display the HackWeek cute logo.
- Practice some Go / Rust coding and programming patterns
- Fiddle around, hack, learn, have fun
- keep a development diary, practice on project documentation
Follow this link for source code repository
- includes development diary
Some ideas for inspiration:
- https://github.com/coding-horror/basic-computer-games
- https://git.imzadi.de/acn/vt100-games
- https://github.com/skx/lighthouse-of-doom
- https://github.com/rothgar/awesome-tuis
- https://www.zq1.de/~bernhard/images/share/geeko/logo.txt
Related projects:
Resources
Python:
Go:
Rust:
Misc:
Cluster API Provider for Harvester by rcase
Project Description
The Cluster API "infrastructure provider" for Harvester, also named CAPHV, makes it possible to use Harvester with Cluster API. This enables people and organisations to create Kubernetes clusters running on VMs created by Harvester using a declarative spec.
The project has been bootstrapped in HackWeek 23, and its code is available here.
Work done in HackWeek 2023
- Have a early working version of the provider available on Rancher Sandbox : *DONE *
- Demonstrated the created cluster can be imported using Rancher Turtles: DONE
- Stretch goal - demonstrate using the new provider with CAPRKE2: DONE and the templates are available on the repo
Goals for HackWeek 2024
- Add support for ClusterClass
- Add e2e testing
- Add more Unit Tests
- Improve Status Conditions to reflect current state of Infrastructure
- Improve CI (some bugs for release creation)
- Testing with newer Harvester version (v1.3.X and v1.4.X)
- Due to the length and complexity of the templates, maybe package some of them as Helm Charts.
- Other improvement suggestions are welcome!
DONE in HackWeek 24:
- Add more Unit Tests
- Improve Status Conditions for some phases
- Add cloud provider config generation
- Testing with Harvester v1.3.2
- Template improvements
- Issues creation
Thanks to @isim and Dominic Giebert for their contributions!
Resources
Looking for help from anyone interested in Cluster API (CAPI) or who wants to learn more about Harvester.
This will be an infrastructure provider for Cluster API. Some background reading for the CAPI aspect:
- Cluster infrastructure provider contract
- Machine infrastructure provider contract
- Provider implementers guide
Contribute to terraform-provider-libvirt by pinvernizzi
Description
The SUSE Manager (SUMA) teams' main tool for infrastructure automation, Sumaform, largely relies on terraform-provider-libvirt. That provider is also widely used by other teams, both inside and outside SUSE.
It would be good to help the maintainers of this project and give back to the community around it, after all the amazing work that has been already done.
If you're interested in any of infrastructure automation, Terraform, virtualization, tooling development, Go (...) it is also a good chance to learn a bit about them all by putting your hands on an interesting, real-use-case and complex project.
Goals
- Get more familiar with Terraform provider development and libvirt bindings in Go
- Solve some issues and/or implement some features
- Get in touch with the community around the project
Resources
- CONTRIBUTING readme
- Go libvirt library in use by the project
- Terraform plugin development
- "Good first issue" list
Jenny Static Site Generator by adam.pickering
Description
For my personal site I have been using hugo. It works, but I am not satisfied: every time I want to make a change (which is infrequently) I have to read through the documentation again to understand how hugo works. I don't find the documentation easy to use, and the structure of the repository that hugo requires is unintuitive/more complex than what I need. So, I have decided to write my own simple static site generator in Go. It is named Jenny, after my wife.
Goals
- Pages can be written in markdown (which is automatically converted to HTML), but other file types are also allowed
- Easy to understand and use
- Intuitive, simple design
- Clear documentation
- Hot reloading
- Binaries provided for download
- Future maintenance is easy
- Automated releases
Resources
https://github.com/adamkpickering/jenny
Kanidm: A safe and modern IDM system by firstyear
Kanidm is an IDM system written in Rust for modern systems authentication. The github repo has a detailed "getting started" on the readme.
In addition Kanidm has spawn a number of adjacent projects in the Rust ecosystem such as LDAP, Kerberos, Webauthn, and cryptography libraries.
In this hack week, we'll be working on Quokca, a certificate authority that supports PKCS11/TPM storage of keys, issuance of PIV certificates, and ACME without the feature gatekeeping implemented by other CA's like smallstep.
For anyone who wants to participate in Kanidm, we have documentation and developer guides which can help.
I'm happy to help and share more, so please get in touch!
VulnHeap by r1chard-lyu
Description
The VulnHeap project is dedicated to the in-depth analysis and exploitation of vulnerabilities within heap memory management. It focuses on understanding the intricate workflow of heap allocation, chunk structures, and bin management, which are essential to identifying and mitigating security risks.
Goals
- Familiarize with heap
- Heap workflow
- Chunk and bin structure
- Vulnerabilities
- Vulnerability
- Use after free (UAF)
- Heap overflow
- Double free
- Use Docker to create a vulnerable environment and apply techniques to exploit it
Resources
- https://heap-exploitation.dhavalkapil.com/divingintoglibc_heap
- https://raw.githubusercontent.com/cloudburst/libheap/master/heap.png
- https://github.com/shellphish/how2heap?tab=readme-ov-file
Model checking the BPF verifier by shunghsiyu
Project Description
BPF verifier plays a crucial role in securing the system (though less so now that unprivileged BPF is disabled by default in both upstream and SLES), and bugs in the verifier has lead to privilege escalation vulnerabilities in the past (e.g. CVE-2021-3490).
One way to check whether the verifer has bugs to use model checking (a formal verification technique), in other words, build a abstract model of how the verifier operates, and then see if certain condition can occur (e.g. incorrect calculation during value tracking of registers) by giving both the model and condition to a solver.
For the solver I will be using the Z3 SMT solver to do the checking since it provide a Python binding that's relatively easy to use.
Goal for this Hackweek
Learn how to use the Z3 Python binding (i.e. Z3Py) to build a model of (part of) the BPF verifier, probably the part that's related to value tracking using tristate numbers (aka tnum), and then check that the algorithm work as intended.
Resources
- Formal Methods for the Informal Engineer: Tutorial #1 - The Z3 Theorem Prover and its accompanying notebook is a great introduction into Z3
- Has a section specifically on model checking
- Software Verification and Analysis Using Z3 a great example of using Z3 for model checking
- Sound, Precise, and Fast Abstract Interpretation with Tristate Numbers - existing work that use formal verification to prove that the multiplication helper used for value tracking work as intended
- [PATCH v5 net-next 00/12] bpf: rewrite value tracking in verifier - initial patch set that adds tristate number to the verifier
Bot to identify reserved data leak in local files or when publishing on remote repository by mdati
Description
Scope here is to prevent reserved data or generally "unwanted", to be pushed and saved on a public repository, i.e. on Github, causing disclosure or leaking of reserved informations.
The above definition of reserved or "unwanted" may vary, depending on the context: sometime secret keys or password are stored in data or configuration files or hardcoded in source code and depending on the scope of the archive or the level of security, it can be either wanted, permitted or not at all.
As main target here, secrets will be registration keys or passwords, to be detected and managed locally or in a C.I. pipeline.
Goals
Detection:
- Local detection: detect secret words present in local files;
- Remote detection: detect secrets in files, in pipelines, going to be transferred on a remote repository, i.e. via
git push
;
Reporting:
- report the result of detection on stderr and/or log files, noticed excluding the secret values.
Acton:
- Manage the detection, by either deleting or masking the impacted code or deleting/moving the file itself or simply notify it.
Resources
- Project repository, published on Github (link): m-dati/hkwk24;
- Reference folder: hkwk24/chksecret;
- First pull request (link): PR#1;
- Second PR, for improvements: PR#2;
- README.md and TESTS.md documentation files available in the repo root;
- Test subproject repository, for testing CI on push [TBD].
Notes
We use here some examples of secret words, that still can be improved.
The various patterns to match desired reserved words are written in a separated module, to be on demand updated or customized.
[Legend: TBD = to be done]
Contributing to Linux Kernel security by pperego
Description
A couple of weeks ago, I found this blog post by Gustavo Silva, a Linux Kernel contributor.
I always strived to start again into hacking the Linux Kernel, so I asked Coverity scan dashboard access and I want to contribute to Linux Kernel by fixing some minor issues.
I want also to create a Linux Kernel fuzzing lab using qemu and syzkaller
Goals
- Fix at least 2 security bugs
- Create the fuzzing lab and having it running
The story so far
- Day 1: setting up a virtual machine for kernel development using Tumbleweed. Reading a lot of documentation, taking confidence with Coverity dashboard and with procedures to submit a kernel patch
- Day 2: I read really a lot of documentation and I triaged some findings on Coverity SAST dashboard. I have to confirm that SAST tool are great false positives generator, even for low hanging fruits.
- Day 3: Working on trivial changes after I read this blog post:
https://www.toblux.com/posts/2024/02/linux-kernel-patches.html. I have to take confidence
with the patch preparation and submit process yet.
- First trivial patch sent: using strtruefalse() macro instead of hard-coded strings in a staging driver for a lcd display
- Fix for a dereference before null check issue discovered by Coverity (CID 1601566) https://scan7.scan.coverity.com/#/project-view/52110/11354?selectedIssue=1601566
- Day 4: Triaging more issues found by Coverity.
- The patch for CID 1601566 was refused. The check against the NULL pointer was pointless so I prepared a version 2 of the patch removing the check.
- Fixed another dereference before NULL check in iwlmvmparsewowlaninfo_notif() routine (CID 1601547). This one was already submitted by another kernel hacker :(
- Day 5: Wrapping up. I had to do some minor rework on patch for CID 1601566. I found a stalker bothering me in private emails and people I interacted with me, advised he is a well known bothering person. Markus Elfring for the record.
Wrapping up: being back doing kernel hacking is amazing and I don't want to stop it. My battery pack is completely drained but changing the scope gave me a great twist and I really want to feel this energy not doing a single task for months.
I failed in setting up a fuzzing lab but I was too optimistic for the patch submission process.
The patches
Create an Android app for Syncthing as part of the Syncthing Tray project by mkittler
Description
There's already an app but code/features already in Syncthing Tray could be reused to create a nicer app with additional features like managing ignore patterns more easily. The additional UI code for the app could then in turn be re-used by other parts of Syncthing Tray, e.g. to implement further steps in the wizard as requested by some users. This way one "UI wrapper codebase" could serve GNU/Linux, Windows and Android (and in theory MacOS) at the same time which is kind of neat.
Goals
- DONE: Learn more about development for Android and development of UIs with Qt Quick
- DONE: Create an experimental app reusing as much existing Syncthing Tray code as possible
- DONE: Build Syncthing as a library also for Android and use it in the app (already done but needs further testing and integration with the rest of the app configuration)
- DONE: Update the Syncthing Tray website, documentation
- Extend the app so it has at least a start page and an import that can cope with an export of the other app
- Update forum thread
- Upload an experimental build on GitHub
- Extend the Syncthing API to download single files on demand (instead of having to sync the whole directory or use ignore patterns)
Resources
- Android SDK/NDK and emulator
- Qt Quick
YQPkg - Bringing the Single Package Selection Back to Life by shundhammer
tl;dr
Rip out the high-level YQPackageSelector widget from YaST and make it a standalone Qt program without any YaST dependencies.
See section "Result" at the bottom for the current status after the hack week.
Current Status
See the development status issue at the GitHub repo.
tl;dr: It's usable now with all the key features.
It does real package installation / removal / update with reasonable user feedback.
The Past and the Present
We used to have and still have a powerful software selection with the YaST sw_single module (and the YaST patterns counterpart): You can select software down to the package level, you can easily select one of many available package versions, you can select entire patterns - or just view them and pick individual packages from patterns.
You can search packages based on name, description, "requires" or "provides" level, and many more things.
The Future
YaST is on its way out, to be replaced by the new Agama installer and Cockpit for system administration. Those tools can do many things, but fine-grained package selection is not among them. And there are also no other Open Source tools available for that purpose that even come close to the YaST package selection.
Many aspects of YaST have become obsolete over the years; many subsystems now come with a good default configuration, or they can configure themselves automatically. Just think about sound or X11 configuration; when did you last need to touch them?
For others, the desktops bring their own tools (e.g. printers), or there are FOSS configuration tools (NetworkManager, BlueMan). Most YaST modules are no longer needed, and for many others there is a replacement in tools like Cockpit.
But no longer having a powerful fine-grained package selection like in YaST sw_single will hurt. Big time. At least until there is an adequate replacement, many users will want to keep it.
The Idea
YaST sw_single always revolved around a powerful high-level widget on the abstract UI level. Libyui has low-level widgets like YPushButton, YCheckBox, YInputField, more advanced ones like YTable, YTree; and some few very high-level ones like YPackageSelector and YPatternSelector that do the whole package selection thing alone, working just on the libzypp level and changing the status of packages or patterns there.
For the YaST Qt UI, the YQPackageSelector / YQPatternSelector widgets work purely on the Qt and libzypp level; no other YaST infrastructure involved, in particular no Ruby (or formerly YCP) interpreter, no libyui-level widgets, no bindings between Qt / C++ and Ruby / YaST-core, nothing. So it's not too hard to rip all that part out of YaST and create a standalone program from it.
For the NCurses UI, the NCPackageSelector / NCPatternSelector create a lot of libyui widgets (inheriting YWidget / NCWidget) and use a lot of libyui calls to glue them together; and all that of course still needs a lot of YaST / libyui / libyui-ncurses infrastructure. So NCurses is out of scope here.
Preparatory Work: Initializing the Package Subsystem
To see if this is feasible at all, the existing UI examples needed some fixing to check what is needed on that level. That was the make-or-break decision: Would it be realistically possible to set the needed environment in libzypp up (without being stranded in the middle of that task alone at the end of the hack week)?
Yes, it is: That part is already working:
https://github.com/yast/yast-ycp-ui-bindings/pull/71