Smart lighting with Pico 2 by jmodak

Description

I am trying to create a smart-lighting project with a Raspberry Pi Pico that reacts to a movie's visuals and audio that involves combining two distinct functions: ambient screen lighting(visual response) and sound-reactive lighting(audio response)

Goals

• Visuals: Capturing the screen's colour requires an external device to analyse screen content and send colour data to the MCU via serial communication.
• Audio: A sound sensor module connected directly to the Pico that can detect sound volume.
• Pico 2W: The MCU receives data fro, both inputs and controls an LED strip.

Resources

• Raspberry Pi Pico 2 W
• RGB LED strip
• Sound detecting sensor
• Power supply
• breadboard and wires

---

Port OTPClient to GTK >= 4.18 by pstivanin

Project Description

OTPClient is currently using GTK3 and cannot easily be ported to GTK4. Since GTK4 came out, there have been quite some big changes. Also, there are now some new deprecation that will take effect with GTK5 (and are active starting from 4.10 as warnings), so I need to think ahead and port OTPClient without using any of those deprecated features.

Goal for this Hackweek

• fix the last 3 opened issues (https://github.com/paolostivanin/OTPClient/issues/402, https://github.com/paolostivanin/OTPClient/issues/404, https://github.com/paolostivanin/OTPClient/issues/406) and release a new version
• continue the rewrite from where we left last year
• if possible, finally close this 6 years old issue: https://github.com/paolostivanin/OTPClient/issues/123

---

Improve the picotm Transaction Manager by tdz

Picotm is a system-level transaction manager. It provides transactional semantics to low-level C operations, such as

• memory access,
• modifying data structures,
• (some) file I/O, and
• common interfaces from the C Standard Library and POSIX.

Picotm also handles error detection and recovery for all it's functionality. It's fully modular, so new functionality can be added.

For the Hackweek, I want to dedicate some time to picotm. I want to finish some of the refactoring work that I have been working on. If there's time left, I'd like to investigate two-phase commits and how to support them in picotm.

Picotm is available at http://picotm.org/.

---

x64id: An x86/x64 instruction disassembler by m.crivellari

Description

This is an old side project. An x86/x64 machine code decoder. It is useful to get instructions' length and identify each of its fields.

Example:

C7 85 68 FF FF FF 00 00 00 00

This is the instruction:

MOV DWORD PTR SS:[LOCAL.38],0

What follows are some of the information collected by the disassembler, based on the specific instruction:

RAW bytes (hex): C7 85 68 FF FF FF 00 00 00 00
Instr. length: 10
Print instruction fields:
        Located Prefixes 0:

        OP: 0xC7
        mod_reg_rm: 0x85
        disp (4): 0xFFFFFF68
        Iimm: 0x0

Lacks the mnemonic representation: from the previous machine code is not able to produce the "MOV..." instruction, for example.

Goals

The goal is almost easy: partially implement the mnemonic representation. I have already started during the weekend, likely tomorrow I will push the branch!

Resources

• The project: https://github.com/DispatchCode/x64-Instruction-Decoder/
• This is useful to avoid gdb and objdump in local: https://defuse.ca/online-x86-assembler.htm
• Another interesting resource is https://godbolt.org/

Progress

• An initial implementation can be found at: https://github.com/DispatchCode/x64-Instruction-Decoder/tree/mnemonic-support It is described under the "Mnemonic translation" in the README file!

Let's consider this example:

[...other bytes...] 43 89 44 B5 00 01 00 [...other bytes...]

---

pudc - A PID 1 process that barks to the internet by mssola

Description

As a fun exercise in order to dig deeper into the Linux kernel, its interfaces, the RISC-V architecture, and all the dragons in between; I'm building a blog site cooked like this:

• The backend is written in a mixture of C and RISC-V assembly.
• The backend is actually PID1 (for real, not within a container).
• We poll and parse incoming HTTP requests ourselves.
• The frontend is a mere HTML page with htmx.

The project is meant to be Linux-specific, so I'm going to use io_uring, pidfs, namespaces, and Linux-specific features in order to drive all of this.

I'm open for suggestions and so on, but this is meant to be a solo project, as this is more of a learning exercise for me than anything else.

Goals

• Have a better understanding of different Linux features from user space down to the kernel internals.
• Most importantly: have fun.

Resources

• https://github.com/mssola/pudc

---

OS self documentation, health check and troubleshooting by roseswe

Project Description

The aim of this hackweek project is to improve the utility "cfg2html" so that it is even more usable under SLES and perhaps also under Rancher.

cfg2html (see also https://github.com/cfg2html/cfg2html) itself is a very mature utility for collecting and documenting information of an operating system like Linux, AIX, HP-UX and others.

Goal for this Hackweek

The aim is to extend cfg2html

• for SLES and SLES-for-SAP apps, high availability
• Improve code for MicroOS 5.x, SUMA, Edge and k8s environments
• fix shellbeauity warnings
• possibly add more plugins
• SUMA/Salt integration to collect.

Resources

Required skills: Bash, shell script and the SUSE products mentioned.

https://github.com/cfg2html/cfg2html

https://www.cfg2html.com/

---

Improvements to osc (especially with regards to the Git workflow) by mcepl

Description

There is plenty of hacking on osc, where we could spent some fun time. I would like to see a solution for https://github.com/openSUSE/osc/issues/2006 (which is sufficiently non-serious, that it could be part of HackWeek project).

---

Collection and organisation of information about Bulgarian schools by iivanov

Description

To achieve this it will be necessary:

• Collect/download raw data from various government and non-governmental organizations
• Clean up raw data and organise it in some kind database.
• Create tool to make queries easy.
• Or perhaps dump all data into AI and ask questions in natural language.

Goals

By selecting particular school information like this will be provided:

• School scores on national exams.
• School scores from the external evaluations exams.
• School town, municipality and region.
• Employment rate in a town or municipality.
• Average health of the population in the region.

Resources

Some of these are available only in bulgarian.

• https://danybon.com/klasazia
• https://nvoresults.com/index.html
• https://ri.mon.bg/active-institutions
• https://www.nsi.bg/nrnm/ekatte/archive

Results

• Information about all Bulgarian schools with their scores during recent years cleaned and organised into SQL tables
• Information about all Bulgarian villages, cities, municipalities and districts cleaned and organised into SQL tables
• Information about all Bulgarian villages and cities census since beginning of this century cleaned and organised into SQL tables.
• Information about all Bulgarian municipalities about religion, ethnicity cleaned and organised into SQL tables.
• Data successfully loaded to locally running Ollama with help to Vanna.AI
• Seems to be usable.

TODO

• Add more statistical information about municipalities and ....

Code and data

• Github

---

Help Create A Chat Control Resistant Turnkey Chatmail/Deltachat Relay Stack - Rootless Podman Compose, OpenSUSE BCI, Hardened, & SELinux by 3nd5h1771fy

Description

The Mission: Decentralized & Sovereign Messaging

FYI: If you have never heard of "Chatmail", you can visit their site here, but simply put it can be thought of as the underlying protocol/platform decentralized messengers like DeltaChat use for their communications. Do not confuse it with the honeypot looking non-opensource paid for prodect with better seo that directs you to chatmailsecure(dot)com

In an era of increasing centralized surveillance by unaccountable bad actors (aka BigTech), "Chat Control," and the erosion of digital privacy, the need for sovereign communication infrastructure is critical. Chatmail is a pioneering initiative that bridges the gap between classic email and modern instant messaging, offering metadata-minimized, end-to-end encrypted (E2EE) communication that is interoperable and open.

However, unless you are a seasoned sysadmin, the current recommended deployment method of a Chatmail relay is rigid, fragile, difficult to properly secure, and effectively takes over the entire host the "relay" is deployed on.

Why This Matters

A simple, host agnostic, reproducible deployment lowers the entry cost for anyone wanting to run a privacy‑preserving, decentralized messaging relay. In an era of perpetually resurrected chat‑control legislation threats, EU digital‑sovereignty drives, and many dangers of using big‑tech messaging platforms (Apple iMessage, WhatsApp, FB Messenger, Instagram, SMS, Google Messages, etc...) for any type of communication, providing an easy‑to‑use alternative empowers:

• Censorship resistance - No single entity controls the relay; operators can spin up new nodes quickly.
  
• Surveillance mitigation - End‑to‑end OpenPGP encryption ensures relay operators never see plaintext.
  
• Digital sovereignty - Communities can host their own infrastructure under local jurisdiction, aligning with national data‑policy goals.
  

By turning the Chatmail relay into a plug‑and‑play container stack, we enable broader adoption, foster a resilient messaging fabric, and give developers, activists, and hobbyists a concrete tool to defend privacy online.

Goals

As I indicated earlier, this project aims to drastically simplify the deployment of Chatmail relay. By converting this architecture into a portable, containerized stack using Podman and OpenSUSE base container images, we can allow anyone to deploy their own censorship-resistant, privacy-preserving communications node in minutes.

Our goal for Hack Week: package every component into containers built on openSUSE/MicroOS base images, initially orchestrated with a single container-compose.yml (podman-compose compatible). The stack will:

• Run on any host that supports Podman (including optimizations and enhancements for SELinux‑enabled systems).
  
• Allow network decoupling by refactoring configurations to move from file-system constrained Unix sockets to internal TCP networking, allowing containers achieve stricter isolation.
• Utilize Enhanced Security with SELinux by using purpose built utilities such as udica we can quickly generate custom SELinux policies for the container stack, ensuring strict confinement superior to standard/typical Docker deployments.
• Allow the use of bind or remote mounted volumes for shared data (/var/vmail, DKIM keys, TLS certs, etc.).
  
• Replace the local DNS server requirement with a remote DNS‑provider API for DKIM/TXT record publishing.
  

By delivering a turnkey, host agnostic, reproducible deployment, we lower the barrier for individuals and small communities to launch their own chatmail relays, fostering a decentralized, censorship‑resistant messaging ecosystem that can serve DeltaChat users and/or future services adopting this protocol

Resources

• The links included above
• https://chatmail.at/doc/relay/
• https://delta.chat/en/help
• Project repo -> https://codeberg.org/EndShittification/containerized-chatmail-relay

---

Testing and adding GNU/Linux distributions on Uyuni by juliogonzalezgil

Join the Gitter channel! https://gitter.im/uyuni-project/hackweek

Uyuni is a configuration and infrastructure management tool that saves you time and headaches when you have to manage and update tens, hundreds or even thousands of machines. It also manages configuration, can run audits, build image containers, monitor and much more!

Currently there are a few distributions that are completely untested on Uyuni or SUSE Manager (AFAIK) or just not tested since a long time, and could be interesting knowing how hard would be working with them and, if possible, fix whatever is broken.

For newcomers, the easiest distributions are those based on DEB or RPM packages. Distributions with other package formats are doable, but will require adapting the Python and Java code to be able to sync and analyze such packages (and if salt does not support those packages, it will need changes as well). So if you want a distribution with other packages, make sure you are comfortable handling such changes.

No developer experience? No worries! We had non-developers contributors in the past, and we are ready to help as long as you are willing to learn. If you don't want to code at all, you can also help us preparing the documentation after someone else has the initial code ready, or you could also help with testing :-)

The idea is testing Salt (including bootstrapping with bootstrap script) and Salt-ssh clients

To consider that a distribution has basic support, we should cover at least (points 3-6 are to be tested for both salt minions and salt ssh minions):

1. Reposync (this will require using spacewalk-common-channels and adding channels to the .ini file)
2. Onboarding (salt minion from UI, salt minion from bootstrap scritp, and salt-ssh minion) (this will probably require adding OS to the bootstrap repository creator)
3. Package management (install, remove, update...)
4. Patching
5. Applying any basic salt state (including a formula)
6. Salt remote commands
7. Bonus point: Java part for product identification, and monitoring enablement
8. Bonus point: sumaform enablement (https://github.com/uyuni-project/sumaform)
9. Bonus point: Documentation (https://github.com/uyuni-project/uyuni-docs)
10. Bonus point: testsuite enablement (https://github.com/uyuni-project/uyuni/tree/master/testsuite)

If something is breaking: we can try to fix it, but the main idea is research how supported it is right now. Beyond that it's up to each project member how much to hack :-)

• If you don't have knowledge about some of the steps: ask the team
• If you still don't know what to do: switch to another distribution and keep testing.

This card is for EVERYONE, not just developers. Seriously! We had people from other teams helping that were not developers, and added support for Debian and new SUSE Linux Enterprise and openSUSE Leap versions :-)

In progress/done for Hack Week 25

Guide

We started writin a Guide: Adding a new client GNU Linux distribution to Uyuni at https://github.com/uyuni-project/uyuni/wiki/Guide:-Adding-a-new-client-GNU-Linux-distribution-to-Uyuni, to make things easier for everyone, specially those not too familiar wht Uyuni or not technical.

openSUSE Leap 16.0

The distribution will all love!

https://en.opensuse.org/openSUSE:Roadmap#DRAFTScheduleforLeap16.0

Curent Status We started last year, it's complete now for Hack Week 25! :-D

• [W] Reposync (this will require using spacewalk-common-channels and adding channels to the .ini file) NOTE: Done, client tools for SLMicro6 are using as those for SLE16.0/openSUSE Leap 16.0 are not available yet
• [W] Onboarding (salt minion from UI, salt minion from bootstrap scritp, and salt-ssh minion) (this will probably require adding OS to the bootstrap repository creator)
• [W] Package management (install, remove, update...). Works, even reboot requirement detection

---

Update M2Crypto by mcepl

There are couple of projects I work on, which need my attention and putting them to shape:

• M2Crypto

Goal for this Hackweek

• Put M2Crypto into better shape (most issues closed, all pull requests processed)
• More fun to learn jujutsu
• Play more with Gemini, how much it help (or not).
• Perhaps, also (just slightly related), help to fix vis to work with LuaJIT, particularly to make vis-lspc working.

---