Port OTPClient to GTK >= 4.18 by pstivanin

Project Description

OTPClient is currently using GTK3 and cannot easily be ported to GTK4. Since GTK4 came out, there have been quite some big changes. Also, there are now some new deprecation that will take effect with GTK5 (and are active starting from 4.10 as warnings), so I need to think ahead and port OTPClient without using any of those deprecated features.

Goal for this Hackweek

• fix the last 3 opened issues (https://github.com/paolostivanin/OTPClient/issues/402, https://github.com/paolostivanin/OTPClient/issues/404, https://github.com/paolostivanin/OTPClient/issues/406) and release a new version
• continue the rewrite from where we left last year
• if possible, finally close this 6 years old issue: https://github.com/paolostivanin/OTPClient/issues/123

---

x64id: An x86/x64 instruction disassembler by m.crivellari

Description

This is an old side project. An x86/x64 machine code decoder. It is useful to get instructions' length and identify each of its fields.

Example:

C7 85 68 FF FF FF 00 00 00 00

This is the instruction:

MOV DWORD PTR SS:[LOCAL.38],0

What follows are some of the information collected by the disassembler, based on the specific instruction:

RAW bytes (hex): C7 85 68 FF FF FF 00 00 00 00
Instr. length: 10
Print instruction fields:
        Located Prefixes 0:

        OP: 0xC7
        mod_reg_rm: 0x85
        disp (4): 0xFFFFFF68
        Iimm: 0x0

Lacks the mnemonic representation: from the previous machine code is not able to produce the "MOV..." instruction, for example.

Goals

The goal is almost easy: partially implement the mnemonic representation. I have already started during the weekend, likely tomorrow I will push the branch!

Resources

• The project: https://github.com/DispatchCode/x64-Instruction-Decoder/
• This is useful to avoid gdb and objdump in local: https://defuse.ca/online-x86-assembler.htm
• Another interesting resource is https://godbolt.org/

Progress

• An initial implementation can be found at: https://github.com/DispatchCode/x64-Instruction-Decoder/tree/mnemonic-support It is described under the "Mnemonic translation" in the README file!

Let's consider this example:

[...other bytes...] 43 89 44 B5 00 01 00 [...other bytes...]

---

pudc - A PID 1 process that barks to the internet by mssola

Description

As a fun exercise in order to dig deeper into the Linux kernel, its interfaces, the RISC-V architecture, and all the dragons in between; I'm building a blog site cooked like this:

• The backend is written in a mixture of C and RISC-V assembly.
• The backend is actually PID1 (for real, not within a container).
• We poll and parse incoming HTTP requests ourselves.
• The frontend is a mere HTML page with htmx.

The project is meant to be Linux-specific, so I'm going to use io_uring, pidfs, namespaces, and Linux-specific features in order to drive all of this.

I'm open for suggestions and so on, but this is meant to be a solo project, as this is more of a learning exercise for me than anything else.

Goals

• Have a better understanding of different Linux features from user space down to the kernel internals.
• Most importantly: have fun.

Resources

• https://github.com/mssola/pudc

---

Add a machine-readable output to dmidecode by jdelvare

Description

There have been repeated requests for a machine-friendly dmidecode output over the last decade. During Hack Week 19, 5 years ago, I prepared the code to support alternative output formats, but didn't have the time to go further. Last year, Jiri Hnidek from Red Hat Linux posted a proof-of-concept implementation to add JSON output support. This is a fairly large pull request which needs to be carefully reviewed and tested.

Goals

Review Jiri's work and provide constructive feedback. Merge the code if acceptable. Evaluate the costs and benefits of using a library such as json-c.

---

Smart lighting with Pico 2 by jmodak

Description

I am trying to create a smart-lighting project with a Raspberry Pi Pico that reacts to a movie's visuals and audio that involves combining two distinct functions: ambient screen lighting(visual response) and sound-reactive lighting(audio response)

Goals

• Visuals: Capturing the screen's colour requires an external device to analyse screen content and send colour data to the MCU via serial communication.
• Audio: A sound sensor module connected directly to the Pico that can detect sound volume.
• Pico 2W: The MCU receives data fro, both inputs and controls an LED strip.

Resources

• Raspberry Pi Pico 2 W
• RGB LED strip
• Sound detecting sensor
• Power supply
• breadboard and wires

---

Improvements to osc (especially with regards to the Git workflow) by mcepl

Description

There is plenty of hacking on osc, where we could spent some fun time. I would like to see a solution for https://github.com/openSUSE/osc/issues/2006 (which is sufficiently non-serious, that it could be part of HackWeek project).

---

Testing and adding GNU/Linux distributions on Uyuni by juliogonzalezgil

Join the Gitter channel! https://gitter.im/uyuni-project/hackweek

Uyuni is a configuration and infrastructure management tool that saves you time and headaches when you have to manage and update tens, hundreds or even thousands of machines. It also manages configuration, can run audits, build image containers, monitor and much more!

Currently there are a few distributions that are completely untested on Uyuni or SUSE Manager (AFAIK) or just not tested since a long time, and could be interesting knowing how hard would be working with them and, if possible, fix whatever is broken.

For newcomers, the easiest distributions are those based on DEB or RPM packages. Distributions with other package formats are doable, but will require adapting the Python and Java code to be able to sync and analyze such packages (and if salt does not support those packages, it will need changes as well). So if you want a distribution with other packages, make sure you are comfortable handling such changes.

No developer experience? No worries! We had non-developers contributors in the past, and we are ready to help as long as you are willing to learn. If you don't want to code at all, you can also help us preparing the documentation after someone else has the initial code ready, or you could also help with testing :-)

The idea is testing Salt (including bootstrapping with bootstrap script) and Salt-ssh clients

To consider that a distribution has basic support, we should cover at least (points 3-6 are to be tested for both salt minions and salt ssh minions):

1. Reposync (this will require using spacewalk-common-channels and adding channels to the .ini file)
2. Onboarding (salt minion from UI, salt minion from bootstrap scritp, and salt-ssh minion) (this will probably require adding OS to the bootstrap repository creator)
3. Package management (install, remove, update...)
4. Patching
5. Applying any basic salt state (including a formula)
6. Salt remote commands
7. Bonus point: Java part for product identification, and monitoring enablement
8. Bonus point: sumaform enablement (https://github.com/uyuni-project/sumaform)
9. Bonus point: Documentation (https://github.com/uyuni-project/uyuni-docs)
10. Bonus point: testsuite enablement (https://github.com/uyuni-project/uyuni/tree/master/testsuite)

If something is breaking: we can try to fix it, but the main idea is research how supported it is right now. Beyond that it's up to each project member how much to hack :-)

• If you don't have knowledge about some of the steps: ask the team
• If you still don't know what to do: switch to another distribution and keep testing.

This card is for EVERYONE, not just developers. Seriously! We had people from other teams helping that were not developers, and added support for Debian and new SUSE Linux Enterprise and openSUSE Leap versions :-)

In progress/done for Hack Week 25

Guide

We started writin a Guide: Adding a new client GNU Linux distribution to Uyuni at https://github.com/uyuni-project/uyuni/wiki/Guide:-Adding-a-new-client-GNU-Linux-distribution-to-Uyuni, to make things easier for everyone, specially those not too familiar wht Uyuni or not technical.

openSUSE Leap 16.0

The distribution will all love!

https://en.opensuse.org/openSUSE:Roadmap#DRAFTScheduleforLeap16.0

Curent Status We started last year, it's complete now for Hack Week 25! :-D

• [W] Reposync (this will require using spacewalk-common-channels and adding channels to the .ini file) NOTE: Done, client tools for SLMicro6 are using as those for SLE16.0/openSUSE Leap 16.0 are not available yet
• [W] Onboarding (salt minion from UI, salt minion from bootstrap scritp, and salt-ssh minion) (this will probably require adding OS to the bootstrap repository creator)
• [W] Package management (install, remove, update...). Works, even reboot requirement detection

---

Improve/rework household chore tracker `chorazon` by gniebler

Description

I wrote a household chore tracker named chorazon, which is meant to be deployed as a web application in the household's local network.

It features the ability to set up different (so far only weekly) schedules per task and per person, where tasks may span several days.

There are "tokens", which can be collected by users. Tasks can (and usually will) have rewards configured where they yield a certain amount of tokens. The idea is that they can later be redeemed for (surprise) gifts, but this is not implemented yet. (So right now one needs to edit the DB manually to subtract tokens when they're redeemed.)

Days are not rolled over automatically, to allow for task completion control.

We used it in my household for several months, with mixed success. There are many limitations in the system that would warrant a revisit.

It's written using the Pyramid Python framework with URL traversal, ZODB as the data store and Web Components for the frontend.

Goals

• Add admin screens for users, tasks and schedules
• Add models, pages etc. to allow redeeming tokens for gifts/surprises
• …?

Resources

tbd (Gitlab repo)

---

Update M2Crypto by mcepl

There are couple of projects I work on, which need my attention and putting them to shape:

• M2Crypto

Goal for this Hackweek

• Put M2Crypto into better shape (most issues closed, all pull requests processed)
• More fun to learn jujutsu
• Play more with Gemini, how much it help (or not).
• Perhaps, also (just slightly related), help to fix vis to work with LuaJIT, particularly to make vis-lspc working.

---

Bring to Cockpit + System Roles capabilities from YAST by miguelpc

Bring to Cockpit + System Roles features from YAST

Cockpit and System Roles have been added to SLES 16 There are several capabilities in YAST that are not yet present in Cockpit and System Roles We will follow the principle of "automate first, UI later" being System Roles the automation component and Cockpit the UI one.

Goals

The idea is to implement service configuration in System Roles and then add an UI to manage these in Cockpit. For some capabilities it will be required to have an specific Cockpit Module as they will interact with a reasource already configured.

Resources

A plan on capabilities missing and suggested implementation is available here: https://docs.google.com/spreadsheets/d/1ZhX-Ip9MKJNeKSYV3bSZG4Qc5giuY7XSV0U61Ecu9lo/edit

Linux System Roles:

• https://linux-system-roles.github.io/
• https://build.opensuse.org/package/show/openSUSE:Factory/ansible-linux-system-roles Package on sle16 ansible-linux-system-roles

First meeting Hackweek catchup

• Monday, December 1 · 11:00 – 12:00
• Time zone: Europe/Madrid
• Google Meet link: https://meet.google.com/rrc-kqch-hca

---