One of the winning factors of Docker is the Docker Hub. This the a place where the Docker community shares their images. Thanks to Docker's integrated build system it is possible to create new Docker images by just extending an existing one. That's why the Docker Hub is so useful.

The Docker Hub is made by two tools: * the web ui: this is closed source, * the backend: this is where all the image data is sent and stored. This is an open source project.

It is not possible to recreate the "Docker Hub experience" on premise. You can run the registry internally, but you won't have a UI to list all the images available on it and, most important of all, you won't be able to have any form of authentication. That happens because the authentication is part of the UI component. The open source registry can still use the Docker Hub servers to perform user authentication, but that still suboptimal.

The goal of this project is to have a web application that can be used to: * Manage user groups: add, delete and modify them. * Manage users: add, delete and modify them. Add and remove them from groups. * Manage permissions of the images stored inside of it (e.g.: image X can be downloaded by everyone but only members of group A can modify it, image Y can be seen and downloaded only by users of group B,...). * List the images pushed to the registry.

The communication protocol used by the UI and by the registry is fully documented and can be found here.

There is an open source project that tried to accomplish the same goal. However its development is stalled and it looks just like a quick POF.

Looking for hackers with the skills:

rails web javascript webapis

This project is part of:

Hack Week 12

Activity

  • over 9 years ago: abonilla liked this project.
  • over 9 years ago: bgeuken left this project.
  • over 9 years ago: j_renner liked this project.
  • over 9 years ago: bgeuken joined this project.
  • over 9 years ago: cschum liked this project.
  • over 9 years ago: jordimassaguerpla liked this project.
  • over 9 years ago: bear454 liked this project.
  • over 9 years ago: m_meister liked this project.
  • over 9 years ago: hennevogel liked this project.
  • over 9 years ago: tboerger liked this project.
  • over 9 years ago: fteodori joined this project.
  • over 9 years ago: vuntz liked this project.
  • over 9 years ago: kalabiyau liked this project.
  • over 9 years ago: kalabiyau joined this project.
  • over 9 years ago: kpimenov liked this project.
  • over 9 years ago: flavio_castelli added keyword "web" to this project.
  • over 9 years ago: flavio_castelli added keyword "javascript" to this project.
  • over 9 years ago: flavio_castelli added keyword "webapis" to this project.
  • over 9 years ago: flavio_castelli added keyword "rails" to this project.
  • over 9 years ago: flavio_castelli started this project.
  • over 9 years ago: flavio_castelli originated this project.

  • Comments

    Be the first to comment!

    Similar Projects

    Use local/private LLM for semantic knowledge search by digitaltomm

    Description

    Use a local LLM, based on SUSE AI (ollama, openwebui) to power geeko search (public instance: https://geeko.port0.org/).

    Goals

    Build a SUSE internal instance of https://geeko.port0.org/ that can operate on internal resources, crawling confluence.suse.com, gitlab.suse.de, etc.

    Resources

    Repo: https://github.com/digitaltom/semantic-knowledge-search

    Public instance: https://geeko.port0.org/

    Results

    Internal instance:

    I have an internal test instance running which has indexed a couple of internal wiki pages from the SCC team. It's using the ollama (llama3.1:8b) backend of suse-ai.openplatform.suse.com to create embedding vectors for indexed resources and to create a chat response. The semantic search for documents is done with a vector search inside of sqlite, using sqlite-vec.

    image


    Recipes catalog and calculator in Rails 8 by gfilippetti

    My wife needs a website to catalog and sell the products of her upcoming bakery, and I need to learn and practice modern Rails. So I'm using this Hack Week to build a modern store using the latest Ruby on Rails best practices, ideally up to the deployment.

    TO DO

    • Index page
    • Product page
    • Admin area -- Supplies calculator based on orders -- Orders notification
    • Authentication
    • Payment
    • Deployment

    Day 1

    As my Rails knowledge was pretty outdated and I had 0 experience with Turbo (wich I want to use in the app), I started following a turbo-rails course. I completed 5 of 11 chapters.

    Day 2

    Continued the course until chapter 8 and added live updates & an empty state to the app. I should finish the course on day 3 and start my own project with the knowledge from it.

    Hackweek 24

    For this Hackweek I'll continue this project, focusing on a Catalog/Calculator for my wife's recipes so she can use for her Café.

    Day 1


    WebUI for your data by avicenzi

    A single place to view every bit of data you have.

    Problem

    You have too much data and you are a data hoarder.

    • Family photos and videos.
    • Lots of eBooks, TV Shows, Movies, and else.
    • Boxes full of papers (taxes, invoices, IDs, certificates, exams, and else).
    • Bank account statements (multiple currencies, countries, and people).

    Maybe you have some data on S3, some on your NAS, and some on your local PC.

    • How do you get it all together?
    • How do you link a bank transaction to a product invoice?
    • How to tag any object type and create a collection out of it (mix videos, photos, PDFs, transactions)?
    • How to store this? file/folder structure does not work, everything is linked together

    Project Description

    The idea is a place where you can throw all your data, photos, videos, documents, binaries, and else.

    Create photo albums, document collections, add tags across multiple file-formats, link content, and else.

    The UI should be easy to use, where the data is not important for now (could be all S3 or local drive).

    Similar proposals

    The closest I found so far is https://perkeep.org/, but this is not what I'm looking for.

    Goal for this Hackweek

    Create a web UI, in Svelte ideally, perhaps React.

    It should be able to show photos and videos at least.

    Resources

    None so far, this is just an idea.


    obs-service-vendor_node_modules by cdimonaco

    Description

    When building a javascript package for obs, one option is to use https://github.com/openSUSE/obs-service-node_modules as source service to get the project npm dependencies available for package bulding.

    obs-service-vendornodemodules aims to be a source service that vendors npm dependencies, installing them with npm install (optionally only production ones) and then creating a tar package of the installed dependencies.

    The tar will be used as source in the package building definitions.

    Goals

    • Create an obs service package that vendors the npm dependencies as tar archive.
    • Maybe add some macros to unpack the vendor package in the specfiles

    Resources


    Editor mode at Agama web interface by ancorgs

    Description

    Agama is a new Linux installer that will be very likely used for SLES 16.

    It takes a configuration (in JSON format) as input. And offers several interfaces to build that configuration in an easy and interactive way.

    I was considering the possibility to add to the web interface a "text editor" mode similar to the XML editor available at virt-manager. That could be used to see how the changes in the UI translate into changes on the configuration.

    Goals

    • Refresh my knowledge about UI development for Agama, since there was a major overhaul recently (adopting TanStack Query) and I need to learn the new way to do things.
    • Please hackers who always want to know how things work internally. :-)


    Agama installer on-line demo by lslezak

    Description

    The Agama installer provides a quite complex user interface. We have some screenshots on the web page but as it is basically a web application it would be nice to have some on-line demo where users could click and check it live.

    The problem is that the Agama server directly accesses the hardware (storage probing) and loads installation repositories. We cannot easily mock this in the on-line demo so the easiest way is to have just a read-only demo. You could explore the configuration options but you could not change anything, all changes would be ignored.

    The read-only demo would be a bit limited but I still think it would be useful for potential users get the feeling of the new Agama installer and get familiar with it before using in a real installation.

    As a proof of concept I already created this on-line demo.

    The implementation basically builds Agama in two modes - recording mode where it saves all REST API responses and replay mode where it for the REST API requests returns the previously recorded responses. Recording in the browser is inconvenient and error prone, there should be some scripting instead (see below).

    Goals

    • Create an Agama on-line demo which can be easily tested by users
    • The Agama installer is still in alpha phase and in active development, the online demo needs to be easily rebuilt with the latest Agama version
    • Ideally there should be some automation so the demo page is rebuilt automatically without any developer interactions (once a day or week?)

    TODO

    • Use OpenAPI to get all Agama REST API endpoints, write a script which queries all the endpoints automatically and saves the collected data to a file (see this related PR).
    • Write a script for starting an Agama VM (use libvirt/qemu?), the script should ensure we always use the same virtual HW so if we need to dump the latest REST API state we get the same (or very similar data). This should ensure the demo page does not change much regarding the storage proposal etc...
    • Fix changing the product, currently it gets stuck after clicking the "Select" button.
    • Move the mocking data (the recorded REST API responses) outside the Agama sources, it's too big and will be probably often updated. To avoid messing the history keep it in a separate GitHub repository
    • Allow changing the UI language
    • Display some note (watermark) in the page so it is clear it is a read-only demo (probably with some version or build date to know how old it is)
    • Automation for building new demo page from the latest sources. There should be some check which ensures the recorded data still matches the OpenAPI specification.

    Changing the UI language

    This will be quite tricky because selecting the proper translation file is done on the server side. We would probably need to completely re-implement the logic in the browser side and adapt the server for that.

    Also some REST API responses contain translated texts (storage proposal, pattern names in software). We would need to query the respective endpoints in all supported languages and return the correct response in runtime according to the currently selected language.

    Resources


    Design the new UI for storage configuration at Agama by ancorgs

    Description

    We are in the process of re-designing the web user interface to configure storage at Agama. We expected to have a clear idea of what we wanted before starting Hack Week. But the idea is still not that clear. So I will use use my Hack Week time to try several prototypes since I really want this to be done.

    Goals

    Have a prototype using Patternfly components and addressing all the use-cases we want to cover. Easy for the easy cases. Capable for the complex ones.


    Agama Expert Partitioner by joseivanlopez

    Description

    Agama is a new Linux installer that will be very likely used for SLES 16.

    It offers an UI for configuring the target system (language, patterns, network, etc). One of the more complex sections is the storage configuration, which is going to be revamped. This project consists on exploring the possibility of having something similar to the YaST Expert Partitioner for Agama.

    Goals

    • Explore different approaches for the storage UI in Agama.