OSHW USB token for Passkeys (FIDO2, U2F, WebAuthn) and PGP by duwe

Description

The idea to carry your precious key material along in a specially secured hardware item is almost as old as public keys themselves, starting with the OpenPGP card. Nowadays, an USB plug or NFC are the hardware interfaces of choice, and password-less log-ins are fortunately becoming more popular and standardised.

Meanwhile there are a few products available in that field, for example

• yubikey - the "market leader", who continues to sell off buggy, allegedly unfixable firmware ROMs from old stock. Needless to say, it's all but open source, so assume backdoors.

• nitrokey - the "start" variant is open source, but the hardware was found to leak its flash ROM content via the SWD debugging interface (even when the flash is read protected !) Compute power is barely enough for Curve25519, Flash memory leaves room for only 3 keys.

• solokey(2) - quite neat hardware, with a secure enclave called "TrustZone-M". Unfortunately, the OSS firmware development is stuck in a rusty dead end and cannot use it. Besides, NXP's support for open source toolchains for its devboards is extremely limited.

I plan to base this project on the not-so-tiny USB stack, which is extremely easy to retarget, and to rewrite / refactor the crypto protocols to use the keys only via handles, so the actual key material can be stored securely. Best OSS support seems to be for STM32-based products.

Goals

Create a proof-of-concept item that can provide a second factor for logins and/or decrypt a PGP mail with your private key without disclosing the key itself. Implement or at least show a migration path to store the private key in a location with elevated hardware security.

Resources

STM32 Nucleo, blackmagic probe, tropicsquare tropic01, arm-none cross toolchain

---

Looking at Rust if it could be an interesting programming language by jsmeix

Get some basic understanding of Rust security related features from a general point of view.

This Hack Week project is not to learn Rust to become a Rust programmer. This might happen later but it is not the goal of this Hack Week project.

The goal of this Hack Week project is to evaluate if Rust could be an interesting programming language.

An interesting programming language must make it easier to write code that is correct and stays correct when over time others maintain and enhance it than the opposite.

---

vex8s-controller: a kubernetes controller to automatically generate VEX documents of your running workloads by agreggi

Description

vex8s-controller is an add-on for SBOMscanner project. Its purpose is to automatically generate VEX documents based on the workloads running in a kubernetes cluster. It integrates directly with SBOMscanner by monitoring VulnerabilityReports created for container images and producing corresponding VEX documents that reflect each workload’s SecurityContext.

Here's the workflow explained:

1. sbomscanner scans for images in registry
2. generates a VulnerabilityReport with the image CVEs
3. vex8s-controller triggers when a workload is scheduled on the cluster and generates a VEX document based on the workload SecurityContext configuration
4. the VEX document is provided by vex8s-controller using a VEX Hub repository
5. sbomscanner configure the VEXHub CRD to point to the internal vex8s-controller VEX Hub repository

Goals

The objective is to build a kubernetes controller that uses the vex8s mitigation rules engine to generate VEX documents and serve them through an internal VEX Hub repository within the cluster. SBOMscanner can then be configured to consume VEX data directly from this in-cluster repository managed by vex8s-controller.

Resources

• vex8s
• SBOMscanner

---

Exploring Rust's potential: from basics to security by sferracci

Description

This project aims to conduct a focused investigation and practical application of the Rust programming language, with a specific emphasis on its security model. A key component will be identifying and understanding the most common vulnerabilities that can be found in Rust code.

Goals

Achieve a beginner/intermediate level of proficiency in writing Rust code. This will be measured by trying to solve LeetCode problems focusing on common data structures and algorithms. Study Rust vulnerabilities and learning best practices to avoid them.

Resources

Rust book: https://doc.rust-lang.org/book/

---

Help Create A Chat Control Resistant Turnkey Chatmail/Deltachat Relay Stack - Rootless Podman Compose, OpenSUSE BCI, Hardened, & SELinux by 3nd5h1771fy

Description

The Mission: Decentralized & Sovereign Messaging

FYI: If you have never heard of "Chatmail", you can visit their site here, but simply put it can be thought of as the underlying protocol/platform decentralized messengers like DeltaChat use for their communications. Do not confuse it with the honeypot looking non-opensource paid for prodect with better seo that directs you to chatmailsecure(dot)com

In an era of increasing centralized surveillance by unaccountable bad actors (aka BigTech), "Chat Control," and the erosion of digital privacy, the need for sovereign communication infrastructure is critical. Chatmail is a pioneering initiative that bridges the gap between classic email and modern instant messaging, offering metadata-minimized, end-to-end encrypted (E2EE) communication that is interoperable and open.

However, unless you are a seasoned sysadmin, the current recommended deployment method of a Chatmail relay is rigid, fragile, difficult to properly secure, and effectively takes over the entire host the "relay" is deployed on.

Why This Matters

A simple, host agnostic, reproducible deployment lowers the entry cost for anyone wanting to run a privacy‑preserving, decentralized messaging relay. In an era of perpetually resurrected chat‑control legislation threats, EU digital‑sovereignty drives, and many dangers of using big‑tech messaging platforms (Apple iMessage, WhatsApp, FB Messenger, Instagram, SMS, Google Messages, etc...) for any type of communication, providing an easy‑to‑use alternative empowers:

• Censorship resistance - No single entity controls the relay; operators can spin up new nodes quickly.
  
• Surveillance mitigation - End‑to‑end OpenPGP encryption ensures relay operators never see plaintext.
  
• Digital sovereignty - Communities can host their own infrastructure under local jurisdiction, aligning with national data‑policy goals.
  

By turning the Chatmail relay into a plug‑and‑play container stack, we enable broader adoption, foster a resilient messaging fabric, and give developers, activists, and hobbyists a concrete tool to defend privacy online.

Goals

As I indicated earlier, this project aims to drastically simplify the deployment of Chatmail relay. By converting this architecture into a portable, containerized stack using Podman and OpenSUSE base container images, we can allow anyone to deploy their own censorship-resistant, privacy-preserving communications node in minutes.

Our goal for Hack Week: package every component into containers built on openSUSE/MicroOS base images, initially orchestrated with a single container-compose.yml (podman-compose compatible). The stack will:

• Run on any host that supports Podman (including optimizations and enhancements for SELinux‑enabled systems).
  
• Allow network decoupling by refactoring configurations to move from file-system constrained Unix sockets to internal TCP networking, allowing containers achieve stricter isolation.
• Utilize Enhanced Security with SELinux by using purpose built utilities such as udica we can quickly generate custom SELinux policies for the container stack, ensuring strict confinement superior to standard/typical Docker deployments.
• Allow the use of bind or remote mounted volumes for shared data (/var/vmail, DKIM keys, TLS certs, etc.).
  
• Replace the local DNS server requirement with a remote DNS‑provider API for DKIM/TXT record publishing.
  

By delivering a turnkey, host agnostic, reproducible deployment, we lower the barrier for individuals and small communities to launch their own chatmail relays, fostering a decentralized, censorship‑resistant messaging ecosystem that can serve DeltaChat users and/or future services adopting this protocol

Resources

• The links included above
• https://chatmail.at/doc/relay/
• https://delta.chat/en/help
• Project repo -> https://codeberg.org/EndShittification/containerized-chatmail-relay

---

Add support for todo.sr.ht to git-bug by mcepl

Description

I am a big fan of distributed issue tracking and the best (and possibly) only credible such issue tracker is now git-bug. It has bridges to another centralized issue trackers, so user can download (and modify) issues on GitHub, GitLab, Launchpad, Jira). I am also a fan of SourceHut, which has its own issue tracker, so I would like it bridge the two. Alas, I don’t know much about Go programming language (which the git-bug is written) and absolutely nothing about GraphQL (which todo.sr.ht uses for communication). AI to the rescue. I would like to vibe code (and eventually debug and make functional) bridge to the SourceHut issue tracker.

Goals

Functional fix for https://github.com/git-bug/git-bug/issues/1024

Resources

• anybody how actually understands how GraphQL and authentication on SourceHut (OAuth2) works

---

Build a terminal user-interface (TUI) for Agama by IGonzalezSosa

Description

Officially, Agama offers two different user interfaces. On the one hand, we have the web-based interface, which is the one you see when you run the installation media. On the other hand, we have a command-line interface. In both cases, you can use them using a remote system, either using a browser or the agama CLI.

We would expect most of the cases to be covered by this approach. However, if you cannot use the web-based interface and, for some reason, you cannot access the system through the network, your only option is to use the CLI. This interface offers a mechanism to modify Agama's configuration using an editor (vim, by default), but perhaps you might want to have a more user-friendly way.

Goals

The main goal of this project is to built a minimal terminal user-interface for Agama. This interface will allow the user to install the system providing just a few settings (selecting a product, a storage device and a user password). Then it should report the installation progress.

Resources

• https://agama-project.github.io/
• https://ratatui.rs/

Conclusions

We have summarized our conclusions in a pull request. It includes screenshots ;-) We did not implement all the features we wanted, but we learn a lot during the process. We know that, if needed, we could write a TUI for Agama and we have an idea about how to build it. Good enough.

---

Learn a bit of embedded programming with Rust in a micro:bit v2 by aplanas

Description

micro:bit is a small single board computer with a ARM Cortex-M4 with the FPU extension, with a very constrain amount of memory and a bunch of sensors and leds.

The board is very well documented, with schematics and code for all the features available, so is an excellent platform for learning embedded programming.

Rust is a system programming language that can generate ARM code, and has crates (libraries) to access the micro:bit hardware. There is plenty documentation about how to make small programs that will run in the micro:bit.

Goals

Start learning about embedded programming in Rust, and maybe make some code to the small KS4036F Robot car from keyestudio.

Resources

• micro:bit
• KS4036F
• microbit technical documentation
• schematic
• impl Rust for micro:bit
• Rust Embedded MB2 Discovery Book
• nRF-HAL
• nRF Microbit-v2 BSP (blocking)
• knurling-rs
• C++ microbit codal
• microbit-bsp for Embassy
• Embassy

Diary

Day 1

• Start reading https://mb2.implrust.com/abstraction-layers.html
• Prepare the dev environment (cross compiler, probe-rs)
• Flash first code in the board (blinky led)
• Checking differences between BSP and HAL
• Compile and install a more complex example, with stack protection
• Reading about the simplicity of xtask, as alias for workspace execution
• Reading the CPP code of the official micro:bit libraries. They have a font!

Day 2

• There are multiple BSP for the microbit. One is using async code for non-blocking operations
• Download and study a bit the API for microbit-v2, the nRF official crate
• Take a look of the KS4036F programming, seems that the communication is multiplexed via I2C
• The motor speed can be selected via PWM (pulse with modulation): power it longer (high frequency), and it will increase the speed
• Scrolling some text
• Debug by printing! defmt is a crate that can be used with probe-rs to emit logs
• Start reading input from the board: buttons
• The logo can be touched and detected as a floating point value

Day 3

• A bit confused how to read the float value from a pin

---

Looking at Rust if it could be an interesting programming language by jsmeix

Get some basic understanding of Rust security related features from a general point of view.

This Hack Week project is not to learn Rust to become a Rust programmer. This might happen later but it is not the goal of this Hack Week project.

The goal of this Hack Week project is to evaluate if Rust could be an interesting programming language.

An interesting programming language must make it easier to write code that is correct and stays correct when over time others maintain and enhance it than the opposite.

---

Learn how to use the Relm4 Rust GUI crate by xiaoguang_wang

Relm4 is based on gtk4-rs and compatible with libadwaita. The gtk4-rs crate provides all the tools necessary to develop applications. Building on this foundation, Relm4 makes developing more idiomatic, simpler, and faster.

https://github.com/Relm4/Relm4

---

Mail client with mailing list workflow support in Rust by acervesato

Description

To create a mail user interface using Rust programming language, supporting mailing list patches workflow. I know, aerc is already there, but I would like to create something simpler, without integrated protocols. Just a plain user interface that is using some crates to read and create emails which are fetched and sent via external tools.

I already know Rust, but not the async support, which is needed in this case in order to handle events inside the mail folder and to send notifications.

Goals

• simple user interface in the style of aerc, with some vim keybindings for motions and search
• automatic run of external tools (like mbsync) for checking emails
• automatic run commands for notifications
• apply patch set from ML
• tree-sitter support with styles

Resources

• ratatui: user interface (https://ratatui.rs/)
• notify: folder watcher (https://docs.rs/notify/latest/notify/)
• mail-parser: parser for emails (https://crates.io/crates/mail-parser)
• mail-builder: create emails in proper format (https://docs.rs/mail-builder/latest/mail_builder/)
• gitpatch: ML support (https://crates.io/crates/gitpatch)
• tree-sitter-rust: support for mail format (https://crates.io/crates/tree-sitter)

---