Agama installer on-line demo by lslezak

Description

The Agama installer provides a quite complex user interface. We have some screenshots on the web page but as it is basically a web application it would be nice to have some on-line demo where users could click and check it live.

The problem is that the Agama server directly accesses the hardware (storage probing) and loads installation repositories. We cannot easily mock this in the on-line demo so the easiest way is to have just a read-only demo. You could explore the configuration options but you could not change anything, all changes would be ignored.

The read-only demo would be a bit limited but I still think it would be useful for potential users get the feeling of the new Agama installer and get familiar with it before using in a real installation.

As a proof of concept I already created this on-line demo.

The implementation basically builds Agama in two modes - recording mode where it saves all REST API responses and replay mode where it for the REST API requests returns the previously recorded responses. Recording in the browser is inconvenient and error prone, there should be some scripting instead (see below).

Goals

• Create an Agama on-line demo which can be easily tested by users
• The Agama installer is still in alpha phase and in active development, the online demo needs to be easily rebuilt with the latest Agama version
• Ideally there should be some automation so the demo page is rebuilt automatically without any developer interactions (once a day or week?)

TODO

• Use OpenAPI to get all Agama REST API endpoints, write a script which queries all the endpoints automatically and saves the collected data to a file (see this related PR).
• Write a script for starting an Agama VM (use libvirt/qemu?), the script should ensure we always use the same virtual HW so if we need to dump the latest REST API state we get the same (or very similar data). This should ensure the demo page does not change much regarding the storage proposal etc...
• Fix changing the product, currently it gets stuck after clicking the "Select" button.
• Move the mocking data (the recorded REST API responses) outside the Agama sources, it's too big and will be probably often updated. To avoid messing the history keep it in a separate GitHub repository
• Allow changing the UI language
• Display some note (watermark) in the page so it is clear it is a read-only demo (probably with some version or build date to know how old it is)
• Automation for building new demo page from the latest sources. There should be some check which ensures the recorded data still matches the OpenAPI specification.

Changing the UI language

This will be quite tricky because selecting the proper translation file is done on the server side. We would probably need to completely re-implement the logic in the browser side and adapt the server for that.

Also some REST API responses contain translated texts (storage proposal, pattern names in software). We would need to query the respective endpoints in all supported languages and return the correct response in runtime according to the currently selected language.

Resources

• Agama sources
• Experimental proof of concept demo
• The respective source code change

---

Kanidm: A safe and modern IDM system by firstyear

Kanidm is an IDM system written in Rust for modern systems authentication. The github repo has a detailed "getting started" on the readme.

Kanidm Github

In addition Kanidm has spawn a number of adjacent projects in the Rust ecosystem such as LDAP, Kerberos, Webauthn, and cryptography libraries.

In this hack week, we'll be working on Quokca, a certificate authority that supports PKCS11/TPM storage of keys, issuance of PIV certificates, and ACME without the feature gatekeeping implemented by other CA's like smallstep.

For anyone who wants to participate in Kanidm, we have documentation and developer guides which can help.

I'm happy to help and share more, so please get in touch!

---

SMB3 Server written entirely in Rust by dmulder

Description

Given the number of bugs frequently discovered in the Samba code caused by memory issues, it makes sense to re-write the smbd service purely in Rust code. Meanwhile, it would be wise to abandon backwards compatibility here with insecure protocol versions, and simply implement the SMB3 spec.

Goals

Get a simple server up and running and get it merged into upstream Samba (which now has Rust build support).

Resources

---

Implement a CLI tool for Trento - trentoctl by nkopliku

Description

Implement a trentoctl CLI for interacting with a trento installation

Goals

• learn rust
• implement an initial trentoctl tool to enhance trento automation
• have fun

Resources

trento rust. TUIs listed on this other hackweek project Hack on rich terminal user interfaces

---

Write an url shortener in Rust (And learn in the way) by szarate

So I have 469.icu :), it's currently doing nothing... (and for sale) but in the meantime, I'd like to write an url shortener from scratch and deploy it on my own server

https://github.com/foursixnine/url-manager-rs/tree/main

---

Modularization and Modernization of cifs.ko for Enhanced SMB Protocol Support by hcarvalho

Creator:
Enzo Matsumiya ematsumiya@suse.de @ SUSE Samba team
Members:
Henrique Carvalho henrique.carvalho@suse.com @ SUSE Samba team

Description

Split cifs.ko in 2 separate modules; one for SMB 1.0 and 2.0.x, and another for SMB 2.1, 3.0, and 3.1.1.

Goals

Primary

Start phasing out/deprecation of older SMB versions

Secondary

• Clean up of the code (with focus on the newer versions)
• Update cifs-utils
• Update documentation
• Improve backport workflow (see below)

Technical details

Ideas for the implementation.

• fs/smb/client/{old,new}.c to generate the respective modules
  • Maybe don't create separate folders? (re-evaluate as things progresses!)
• Remove server->{ops,vals} if possible
• Clean up fs_context.* -- merge duplicate options into one, handle them in userspace utils
• Reduce code in smb2pdu.c -- tons of functions with very similar init/setup -> send/recv -> handle/free flow
• Restructure multichannel
  • Treat initial connection as "channel 0" regardless of multichannel enabled/negotiated status, proceed with extra channels accordingly
  • Extra channel just point to "channel 0" as the primary server, no need to allocate an extra TCPServerInfo for each one
• Authentication mechanisms
  • Modernize algorithms (references: himmelblau, IAKERB/Local KDC, SCRAM, oauth2 (Azure), etc.

---

early stage kdump support by mbrugger

Project Description

When we experience a early boot crash, we are not able to analyze the kernel dump, as user-space wasn't able to load the crash system. The idea is to make the crash system compiled into the host kernel (think of initramfs) so that we can create a kernel dump really early in the boot process.

Goal for the Hackweeks

1. Investigate if this is possible and the implications it would have (done in HW21)
2. Hack up a PoC (done in HW22 and HW23)
3. Prepare RFC series (giving it's only one week, we are entering wishful thinking territory here).

update HW23

• I was able to include the crash kernel into the kernel Image.
• I'll need to find a way to load that from init/main.c:start_kernel() probably after kcsan_init()
• I workaround for a smoke test was to hack kexec_file_load() systemcall which has two problems:
  1. My initramfs in the porduction kernel does not have a new enough kexec version, that's not a blocker but where the week ended
  2. As the crash kernel is part of init.data it will be already stale once I can call kexec_file_load() from user-space.

The solution is probably to rewrite the POC so that the invocation can be done from init.text (that's my theory) but I'm not sure if I can reuse the kexec infrastructure in the kernel from there, which I rely on heavily.

update HW24

• Day1
  • rebased on v6.12 with no problems others then me breaking the config
  • setting up a new compilation and qemu/virtme env
  • getting desperate as nothing works that used to work
• Day 2
  • getting to call the invocation of loading the early kernel from __init after kcsan_init()

• Day 3

  • fix problem of memdup not being able to alloc so much memory... use 64K page sizes for now
  • code refactoring
  • I'm now able to load the crash kernel
  • When using virtme I can boot into the crash kernel, also it doesn't boot completely (major milestone!), crash in elfcorehdr_read_notes()

• Day 4

  • crash systems crashes (no pun intended) in copy_old_mempage() link; will need to understand elfcorehdr...
  • call path vmcore_init() -> parse_crash_elf_headers() -> elfcorehdr_read() -> read_from_oldmem() -> copy_oldmem_page() -> copy_to_iter()

• Day 5

  • hacking arch/arm64/kernel/crash_dump.c:copy_old_mempage() to see if crash system really starts. It does.
  • fun fact: retested with more reserved memory and with UEFI FW, host kernel crashes in init but directly starts the crash kernel, so it works (somehow) \o/

• TODOs

  • fix elfcorehdr so that we actually can make use of all this...
  • test where in the boot __init() chain we can/should call kexec_early_dump()

---

Improve UML page fault handler by ptesarik

Description

Improve UML handling of segmentation faults in kernel mode. Although such page faults are generally caused by a kernel bug, it is annoying if they cause an infinite loop, or panic the kernel. More importantly, a robust implementation allows to write KUnit tests for various guard pages, preventing potential kernel self-protection regressions.

Goals

Convert the UML page fault handler to use oops_* helpers, go through a few review rounds and finally get my patch series merged in 6.14.

Resources

Wrong initial attempt: https://lore.kernel.org/lkml/20231215121431.680-1-petrtesarik@huaweicloud.com/T/

---

Modernize ocfs2 by goldwynr

Ocfs2 has gone into a stage of neglect and disrepair. Modernize the code to generate enough interest.

Goals: * Change the mount sequence to use fscontext * Move from using bufferhead to bio/folios * Use iomap * Run it through xfstests

---

Create a DRM driver for VGA video cards by tdz

Yes, those VGA video cards. The goal of this project is to implement a DRM graphics driver for such devices. While actual hardware is hard to obtain or even run today, qemu emulates VGA output.

VGA has a number of limitations, which make this project interesting.

• There are only 640x480 pixels (or less) on the screen. That resolution is also a soft lower limit imposed by DRM. It's mostly a problem for desktop environments though.
• Desktop environments assume 16 million colors, but there are only 16 colors with VGA. VGA's 256 color palette is not available at 640x480. We can choose those 16 colors freely. The interesting part is how to choose them. We have to build a palette for the displayed frame and map each color to one of the palette's 16 entries. This is called dithering, and VGA's limitations are a good opportunity to learn about dithering algorithms.
• VGA has an interesting memory layout. Most graphics devices use linear framebuffers, which store the pixels byte by byte. VGA uses 4 bitplanes instead. Plane 0 holds all bits 0 of all pixels. Plane 1 holds all bits 1 of all pixels, and so on.

The driver will probably not be useful to many people. But, if finished, it can serve as test environment for low-level hardware. There's some interest in supporting old Amiga and Atari framebuffers in DRM. Those systems have similar limitations as VGA, but are harder to obtain and test with. With qemu, the VGA driver could fill this gap.

Apart from the Wikipedia entry, good resources on VGA are at osdev.net and FreeVGA

---