Project Description
I'd like to have NeoMutt show an index of emails at the same time as the body of the selected email, horizontally next to each other.
Goal for this Hackweek
I will to work on option for NeoMutt which allow index and pager pane to be split horizontally (side-by-side).
It looks like I am not the only one which will like this functionality [1, 2].
Email client repository could be found here [3].
[1] Can mutt show the index and body of emails in a horizontal split?
[2] Show index and body of emails in a horizontal split (side-by-side)
[3] Source Code
Resources
Looking for hackers with the skills:
This project is part of:
Hack Week 20
Comments
-
over 4 years ago by iivanov | Reply
Code changes which adds side-by-side index and page layout could be found here.
New behaviour is controlled by pager_columns option.
Non-zero value defines how many columns to be used for pager (email content displaying window).
pager_columns overwrites pager_index_lines option. This means that the index (window which display email subject, date...) will occupy all screen rows.
Result is not what I have expected
. Screen should be biggish to be able to display whole Subject, Date, Author information. -
-
Reply to iivanov
Code changes which adds side-by-side index and page layout could be found here.
New behaviour is controlled by pager_columns option.
Non-zero value defines how many columns to be used for pager (email content displaying window).
pager_columns overwrites pager_index_lines option. This means that the index (window which display email subject, date...) will occupy all screen rows.
Result is not what I have expected . Screen should be biggish to be able to display whole Subject, Date, Author information.
# A First Level Header ## A Second Level Header Use one asterisk to *emphasize* Use two asterisks for **strong emphasis** - Use hyphens - for unordereed - lists This is an [link to example.com](http://example.com/) This is an image  This is a user link @hans This is a project link hw#some-cool-title
Similar Projects
x64id: An x86/x64 instruction disassembler by m.crivellari
Description
This is an old side project. An x86/x64 machine code decoder. It is useful to get instructions' length and identify each of its fields.
Example:
C7 85 68 FF FF FF 00 00 00 00
This is the instruction:
MOV DWORD PTR SS:[LOCAL.38],0
What follows are some of the information collected by the disassembler, based on the specific instruction:
RAW bytes (hex): C7 85 68 FF FF FF 00 00 00 00
Instr. length: 10
Print instruction fields:
Located Prefixes 0:
OP: 0xC7
mod_reg_rm: 0x85
disp (4): 0xFFFFFF68
Iimm: 0x0
Lacks the mnemonic representation: from the previous machine code is not able to produce the "MOV..." instruction, for example.
Goals
The goal is almost easy: partially implement the mnemonic representation. I have already started during the weekend, likely tomorrow I will push the branch!
Resources
- The project: https://github.com/DispatchCode/x64-Instruction-Decoder/
- This is useful to avoid gdb and objdump in local: https://defuse.ca/online-x86-assembler.htm
- Another interesting resource is https://godbolt.org/
Progress
- An initial implementation can be found at: https://github.com/DispatchCode/x64-Instruction-Decoder/tree/mnemonic-support It is described under the "Mnemonic translation" in the README file!
Let's consider this example:
[...other bytes...] 43 89 44 B5 00 01 00 [...other bytes...]
pudc - A PID 1 process that barks to the internet by mssola
Description
As a fun exercise in order to dig deeper into the Linux kernel, its interfaces, the RISC-V architecture, and all the dragons in between; I'm building a blog site cooked like this:
- The backend is written in a mixture of C and RISC-V assembly.
- The backend is actually PID1 (for real, not within a container).
- We poll and parse incoming HTTP requests ourselves.
- The frontend is a mere HTML page with htmx.
The project is meant to be Linux-specific, so I'm going to use io_uring, pidfs, namespaces, and Linux-specific features in order to drive all of this.
I'm open for suggestions and so on, but this is meant to be a solo project, as this is more of a learning exercise for me than anything else.
Goals
- Have a better understanding of different Linux features from user space down to the kernel internals.
- Most importantly: have fun.
Resources
Port OTPClient to GTK >= 4.18 by pstivanin
Project Description
OTPClient is currently using GTK3 and cannot easily be ported to GTK4. Since GTK4 came out, there have been quite some big changes. Also, there are now some new deprecation that will take effect with GTK5 (and are active starting from 4.10 as warnings), so I need to think ahead and port OTPClient without using any of those deprecated features.
Goal for this Hackweek
- fix the last 3 opened issues (https://github.com/paolostivanin/OTPClient/issues/402, https://github.com/paolostivanin/OTPClient/issues/404, https://github.com/paolostivanin/OTPClient/issues/406) and release a new version
- continue the rewrite from where we left last year
- if possible, finally close this 6 years old issue: https://github.com/paolostivanin/OTPClient/issues/123
Smart lighting with Pico 2 by jmodak
Description
I am trying to create a smart-lighting project with a Raspberry Pi Pico that reacts to a movie's visuals and audio that involves combining two distinct functions: ambient screen lighting(visual response) and sound-reactive lighting(audio response)
Goals
- Visuals: Capturing the screen's colour requires an external device to analyse screen content and send colour data to the MCU via serial communication.
- Audio: A sound sensor module connected directly to the Pico that can detect sound volume.
- Pico 2W: The MCU receives data fro, both inputs and controls an LED strip.
Resources
- Raspberry Pi Pico 2 W
- RGB LED strip
- Sound detecting sensor
- Power supply
- breadboard and wires
Improve the picotm Transaction Manager by tdz
Picotm is a system-level transaction manager. It provides transactional semantics to low-level C operations, such as
- memory access,
- modifying data structures,
- (some) file I/O, and
- common interfaces from the C Standard Library and POSIX.
Picotm also handles error detection and recovery for all it's functionality. It's fully modular, so new functionality can be added.
For the Hackweek, I want to dedicate some time to picotm. I want to finish some of the refactoring work that I have been working on. If there's time left, I'd like to investigate two-phase commits and how to support them in picotm.
Picotm is available at http://picotm.org/.