Tronsmart has a Rockchip rk3368 based set-top-box [1].

I want to use it as a arm64 based workstation running openSUSE. The first steps are done and a v4.4-rc1 based kernel boots. The only thing needed right now is the crtc module, which uses some different register mappings (and hopefully nothing else).

Things to do: 1. get the kernel booted from sd-card or usb-stick 2. get a JeOS image building and booting 3. get iommu with arm64 working 4. check if the initial implementation of crtc is working 5. do some nice patches for mainline

I'm based in Barcelona, so it will be difficult to multiplex my board with others. Anyway if someone wants to help, we can find a way. (e.g. looking on the JeOS build, searching for the iommu kernel patches etc).

[1] http://www.tronsmart.com/products/tronsmart-orion-r68-pro

Looking for hackers with the skills:

arm64 jeos kernel kiwi arm

This project is part of:

Hack Week 13 Hack Week 14

Activity

  • almost 8 years ago: michals liked this project.
  • almost 9 years ago: gqjiang liked this project.
  • almost 9 years ago: bamvor liked this project.
  • almost 9 years ago: pgonin liked this project.
  • almost 9 years ago: pgonin liked this project.
  • about 9 years ago: a_faerber liked this project.
  • about 9 years ago: abergmann liked this project.
  • about 9 years ago: mbrugger started this project.
  • about 9 years ago: mbrugger added keyword "arm64" to this project.
  • about 9 years ago: mbrugger added keyword "jeos" to this project.
  • about 9 years ago: mbrugger added keyword "kernel" to this project.
  • about 9 years ago: mbrugger added keyword "kiwi" to this project.
  • about 9 years ago: mbrugger added keyword "arm" to this project.
  • about 9 years ago: mbrugger originated this project.

  • Comments

    • abergmann
      about 9 years ago by abergmann | Reply

      Nice hardware. I would like to hear back from you how good the performance is with this board and if it is good enough for daily business.

    • a_faerber
      about 9 years ago by a_faerber | Reply

      I'm expecting a GeekBox during that week and might join in rk3368 hacking later.

    • bamvor
      almost 9 years ago by bamvor | Reply

      I have another rk3368 STB. I am interested in how do you boot kernel in your box? Through recovery mode?

      I could share it if some one in Beijing want to play it.

      • gqjiang
        almost 9 years ago by gqjiang | Reply

        Hi bamvor,

        I'd like to play with this board, how could I access it from Beijing office?

        Thanks, Guoqing

      • mbrugger
        almost 9 years ago by mbrugger | Reply

        it is a bit tricky. you need to write some garbabe to the boot partition. and then you have to write your kernel to the kernel partition and the dtb to the resource partition.

    • michals
      almost 8 years ago by michals | Reply

      I have a STB with a different RK chip. With the 2G ram it can be used as thin client at best. The GPU on xx68 is something really crappy IIRC so expect fbdev is your friend for graphics. It's not like the other GPUs that could be used are supported, anyway.

    Similar Projects

    Create openSUSE images for Arm/RISC-V boards by avicenzi

    Project Description

    Create openSUSE images (or test generic EFI images) for Arm and/or RISC-V boards that are not yet supported.

    Goal for this Hackweek

    Create bootable images of Tumbleweed for SBCs that currently have no images available or are untested.

    Consider generic EFI images where possible, as some boards can hold a bootloader.

    Document in the openSUSE Wiki how to flash and use the image for a given board.

    Boards that I have around and there are no images:

    • Rock 3B
    • Nano PC T3 Plus
    • Lichee RV D1
    • StartFive VisionFive (has some image needs testing)

    Hack Week 22

    Hack Week 21

    Resources


    Investigate non-booting Forlinx OKMX8MX-C board (aarch64) by a_faerber

    Description

    In the context of a SUSE customer inquiry last year, a Forlinx OKMX8MX-C arm64 board had been relayed to me from China that a customer was not successful booting SUSE Linux Micro on. Typically this happens when the vendor's bootloader (e.g., U-Boot) is not configured properly (e.g., U-Boot's distro boot) to be compliant with Arm SystemReady Devicetree (formerly IR) band. Unfortunately I could not immediately get it to emit any output, to even diagnose why it wasn't working. There was no public documentation on the vendor's website to even confirm I was checking the right UARTs.

    Earlier this year (2024) I happened to meet the ODM/OEM, Forlinx, at Embedded World 2024 in Nuremberg and again the Monday before Hackweek 24 at Electronica 2024 in Munich. The big puzzle was that the PCB print "OKMX8MX-C" does not match any current Forlinx product, there being OKMX8MM-C and OKMX8MP-C products with the Mini and Plus variants of NXP i.MX 8M family instead. One suggestion from Forlinx staff was to double-check the DIP switches on the board for boot mode selection.

    Goals

    Double-check the board name and investigate further what may be wrong with this board.

    Resources

    none

    Progress

    • The board name is indeed as spelled above, not matching any product on forlinx.net.
    • The DIP switches were set to boot from microSD.
    • Changing the DIP switches to eMMC boot did result in UART1 RS-232 output! (although at times garbled with the cable supplied and USB adapter used)
    • As feared, it did not automatically load our GRUB from USB.
    • Booting our GRUB manually from USB (via eMMC U-Boot commands fatload+bootefi) was unsuccessful, with partially Chinese error messages.
    • This confirmed the initial suspicion, already shared with Forlinx at Embedded World 2024, that the Forlinx System-on-Module's boot firmware was not Arm SystemReady Devicetree compliant and that a firmware update would be necessary to remedy that.
    • The microSD card turned out not to contain a bootable image but to only include Chinese-language board documentation (dated 20220507) and BSP files. They used a diverging name of OKMX8MQ-C.


    FizzBuzz OS by mssola

    Project Description

    FizzBuzz OS (or just fbos) is an idea I've had in order to better grasp the fundamentals of the low level of a RISC-V machine. In practice, I'd like to build a small Operating System kernel that is able to launch three processes: one that simply prints "Fizz", another that prints "Buzz", and the third which prints "FizzBuzz". These processes are unaware of each other and it's up to the kernel to schedule them by using the timer interrupts as given on openSBI (fizz on % 3 seconds, buzz on % 5 seconds, and fizzbuzz on % 15 seconds).

    This kernel provides just one system call, write, which allows any program to pass the string to be written into stdout.

    This project is free software and you can find it here.

    Goal for this Hackweek

    • Better understand the RISC-V SBI interface.
    • Better understand RISC-V in privileged mode.
    • Have fun.

    Resources

    Results

    The project was a resounding success add-emoji Lots of learning, and the initial target was met.


    Contributing to Linux Kernel security by pperego

    Description

    A couple of weeks ago, I found this blog post by Gustavo Silva, a Linux Kernel contributor.

    I always strived to start again into hacking the Linux Kernel, so I asked Coverity scan dashboard access and I want to contribute to Linux Kernel by fixing some minor issues.

    I want also to create a Linux Kernel fuzzing lab using qemu and syzkaller

    Goals

    1. Fix at least 2 security bugs
    2. Create the fuzzing lab and having it running

    The story so far

    • Day 1: setting up a virtual machine for kernel development using Tumbleweed. Reading a lot of documentation, taking confidence with Coverity dashboard and with procedures to submit a kernel patch
    • Day 2: I read really a lot of documentation and I triaged some findings on Coverity SAST dashboard. I have to confirm that SAST tool are great false positives generator, even for low hanging fruits.
    • Day 3: Working on trivial changes after I read this blog post: https://www.toblux.com/posts/2024/02/linux-kernel-patches.html. I have to take confidence with the patch preparation and submit process yet.
      • First trivial patch sent: using strtruefalse() macro instead of hard-coded strings in a staging driver for a lcd display
      • Fix for a dereference before null check issue discovered by Coverity (CID 1601566) https://scan7.scan.coverity.com/#/project-view/52110/11354?selectedIssue=1601566
    • Day 4: Triaging more issues found by Coverity.
      • The patch for CID 1601566 was refused. The check against the NULL pointer was pointless so I prepared a version 2 of the patch removing the check.
      • Fixed another dereference before NULL check in iwlmvmparsewowlaninfo_notif() routine (CID 1601547). This one was already submitted by another kernel hacker :(
    • Day 5: Wrapping up. I had to do some minor rework on patch for CID 1601566. I found a stalker bothering me in private emails and people I interacted with me, advised he is a well known bothering person. Markus Elfring for the record.
    • Wrapping up: being back doing kernel hacking is amazing and I don't want to stop it. My battery pack is completely drained but changing the scope gave me a great twist and I really want to feel this energy not doing a single task for months.

      I failed in setting up a fuzzing lab but I was too optimistic for the patch submission process.

    The patches

    1


    Officially Become a Kernel Hacker! by m.crivellari

    Description

    My studies as well my spare time are dedicated to the Linux Kernel. Currently I'm focusing on interrupts on x86_64, but my interests are not restricted to one specific topic, for now.

    I also "played" a little bit with kernel modules (ie lantern, a toy packet analyzer) and I've added a new syscall in order read from a task A, the memory of a task B.

    Maybe this will be a good chance to...

    Goals

    • create my first kernel patch

    Resources

    Achivements


    Create DRM drivers for VESA and EFI framebuffers by tdz

    Description

    We already have simpledrm for firmware framebuffers. But the driver is originally for ARM boards, not PCs. It is already overloaded with code to support both use cases. At the same time it is missing possible features for VESA and EFI, such as palette modes or EDID support. We should have DRM drivers for VESA and EFI interfaces. The infrastructure exists already and initial drivers can be forked from simpledrm.

    Goals

    • Initially, a bare driver for VESA or EFI should be created. It can take functionality from simpledrm.
    • Then we can begin to add additional features. The boot loader can provide EDID data. With VGA hardware, VESA can support paletted modes or color management. Example code exists in vesafb.


    Linux on Cavium CN23XX cards by tsbogend

    Before Cavium switched to ARM64 CPUs they developed quite powerful MIPS based SOCs. The current upstream Linux kernel already supports some Octeon SOCs, but not the latest versions. Goal of this Hack Week project is to use the latest Cavium SDK to update the Linux kernel code to let it running on CN23XX network cards.