SUSE AI Meets the Game Board by moio

Use tabletopgames.ai’s open source TAG and PyTAG frameworks to apply Statistical Forward Planning and Deep Reinforcement Learning to two board games of our own design. On an all-green, all-open source, all-AWS stack!

---

AI + Board Games

Board games have long been fertile ground for AI innovation, pushing the boundaries of capabilities such as strategy, adaptability, and real-time decision-making - from Deep Blue's chess mastery to AlphaZero’s domination of Go. Games aren’t just fun: they’re complex, dynamic problems that often mirror real-world challenges, making them interesting from an engineering perspective.

As avid board gamers, aspiring board game designers, and engineers with careers in open source infrastructure, we’re excited to dive into the latest AI techniques first-hand.

Our goal is to develop an all-open-source, all-green AWS-based stack powered by some serious hardware to drive our board game experiments forward!

---

Project Goals

1. Set Up the Stack:

   • Install and configure the TAG and PyTAG frameworks on SUSE Linux Enterprise Base Container Images.
   • Integrate with the SUSE AI stack for GPU-accelerated training on AWS.
   • Validate a sample GPU-accelerated PyTAG workload on SUSE AI.
   • Ensure the setup is entirely repeatable with Terraform and configuration scripts, documenting results along the way.

2. Design and Implement AI Agents:

   • Develop AI agents for the two board games, incorporating Statistical Forward Planning and Deep Reinforcement Learning techniques.
   • Fine-tune model parameters to optimize game-playing performance.
   • Document the advantages and limitations of each technique.

3. Test, Analyze, and Refine:

   • Conduct AI vs. AI and AI vs. human matches to evaluate agent strategies and performance.
   • Record insights, document learning outcomes, and refine models based on real-world gameplay.

---

Technical Stack

• Frameworks: TAG and PyTAG for AI agent development
• Platform: SUSE AI
• Tools: AWS for high-performance GPU acceleration

---

Why This Project Matters

This project not only deepens our understanding of AI techniques by doing but also showcases the power and flexibility of SUSE’s open-source infrastructure for supporting high-level AI projects. By building on an all-open-source stack, we aim to create a pathway for other developers and AI enthusiasts to explore, experiment, and deploy their own innovative projects within the open-source space.

---

Our Motivation

We believe hands-on experimentation is the best teacher.

Combining our engineering backgrounds with our passion for board games, we’ll explore AI in a way that’s both challenging and creatively rewarding. Our ultimate goal? To hack an AI agent that’s as strategic and adaptable as a real human opponent (if not better!) — and to leverage it to design even better games... for humans to play!

---

SUSE KVM Best Practices by roseswe

Description

SUSE Best Practices around KVM, especially for SAP workloads. Early Google presentation already made from various customer projects and SUSE sources.

Goals

Complete presentation we can reuse in SUSE Consulting projects

Resources

KVM (virt-manager) images

SUSE/SAP/KVM Best Practices

• https://documentation.suse.com/en-us/sles/15-SP6/single-html/SLES-virtualization/
• SAP Note 1522993 - "Linux: SAP on SUSE KVM - Kernel-based Virtual Machine" && 2284516 - SAP HANA virtualized on SUSE Linux Enterprise hypervisors https://me.sap.com/notes/2284516
• SUSECon24: [TUTORIAL-1253] Virtualizing SAP workloads with SUSE KVM || https://youtu.be/PTkpRVpX2PM
• SUSE Best Practices for SAP HANA on KVM - https://documentation.suse.com/sbp/sap-15/html/SBP-SLES4SAP-HANAonKVM-SLES15SP4/index.html

---

COOTWbot by ngetahun

Project Description

At SCC, we have a rotating task of COOTW (Commanding Office of the Week). This task involves responding to customer requests from jira and slack help channels, monitoring production systems and doing small chores. Usually, we have documentation to help the COOTW answer questions and quickly find fixes. Most of these are distributed across github, trello and SUSE Support documentation. The aim of this project is to explore the magic of LLMs and create a conversational bot.

Goal for this Hackweek

• Evaluate data gathering and cleanup. Create sensible embeddings to be used by LLMs.
• Explore performance of Open-source llama based models (LLama, Vicuna, Mistral) in generating coherent and reasonably fast responses.
• Look into creating evaluation data for later use
• [Optional][requires beefy GPUs] Train Low Rank Adaptations (LoRA) and compare results.

Resources

---

New openSUSE-welcome by lkocman

Project Description

Let's revisit our existing openSUSE welcome app.

My goal was to show Leap 16 in a new coat. Welcome app adds to the first time use experience. We've recently added donation button to our existing welcome.

Some things that I recently wanted to address were EOL and possibly upgrade notification.

I've already done some experiments with mint welcome app, but not sure if it's better than the existing one.

There is also a PR to rework existing app https://github.com/openSUSE/openSUSE-welcome/pull/36 (this should be considered as an option too)

Goal for this Hackweek

New welcome app, possibly with EOL notification for Leap.

1) Welcome application(s) with (rebrand changes) maintained under github.com/openSUSE

2) Application is submitted to openSUSE:Factory && openSUSE:Leap:16.0

3) Updated needles in openQA (probably post hackweek)

Resources

Reddit discussion about the best welcome app out there.

Github repo for the current welcome app.

---

Update Haskell ecosystem in Tumbleweed to GHC-9.10.x by psimons

Description

We are currently at GHC-9.8.x, which a bit old. So I'd like to take a shot at the latest version of the compiler, GHC-9.10.x. This is gonna be interesting because the new version requires major updates to all kinds of libraries and base packages, which typically means patching lots of packages to make them build again.

Goals

Have working builds of GHC-9.10.x and the required Haskell packages in 'devel:languages:haskell` so that we can compile:

• git-annex
• pandoc
• xmonad
• cabal-install

Resources

• https://build.opensuse.org/project/show/devel:languages:haskell/
• https://github.com/opensuse-haskell/configuration/
• #discuss-haskell
• https://www.twitch.tv/peti343

---

Create openSUSE images for Arm/RISC-V boards by avicenzi

Project Description

Create openSUSE images (or test generic EFI images) for Arm and/or RISC-V boards that are not yet supported.

Goal for this Hackweek

Create bootable images of Tumbleweed for SBCs that currently have no images available or are untested.

Consider generic EFI images where possible, as some boards can hold a bootloader.

Document in the openSUSE Wiki how to flash and use the image for a given board.

Boards that I have around and there are no images:

• Rock 3B
• Nano PC T3 Plus
• Lichee RV D1
• StartFive VisionFive (has some image needs testing)

Hack Week 22

• NanoPC T4

Hack Week 21

• NanoPi M4B
• Radxa Zero

Resources

• https://en.opensuse.org/Portal:Arm
• https://en.opensuse.org/Portal:RISC-V

---

YQPkg - Bringing the Single Package Selection Back to Life by shundhammer

tl;dr

Rip out the high-level YQPackageSelector widget from YaST and make it a standalone Qt program without any YaST dependencies.

The Past and the Present

We used to have and still have a powerful software selection with the YaST sw_single module (and the YaST patterns counterpart): You can select software down to the package level, you can easily select one of many available package versions, you can select entire patterns - or just view them and pick individual packages from patterns.

You can search packages based on name, description, "requires" or "provides" level, and many more things.

The Future

YaST is on its way out, to be replaced by the new Agama installer and Cockpit for system administration. Those tools can do many things, but fine-grained package selection is not among them. And there are also no other Open Source tools available for that purpose that even come close to the YaST package selection.

Many aspects of YaST have become obsolete over the years; many subsystems now come with a good default configuration, or they can configure themselves automatically. Just think about sound or X11 configuration; when did you last need to touch them?

For others, the desktops bring their own tools (e.g. printers), or there are FOSS configuration tools (NetworkManager, BlueMan). Most YaST modules are no longer needed, and for many others there is a replacement in tools like Cockpit.

But no longer having a powerful fine-grained package selection like in YaST sw_single will hurt. Big time. At least until there is an adequate replacement, many users will want to keep it.

The Idea

YaST sw_single always revolved around a powerful high-level widget on the abstract UI level. Libyui has low-level widgets like YPushButton, YCheckBox, YInputField, more advanced ones like YTable, YTree; and some few very high-level ones like YPackageSelector and YPatternSelector that do the whole package selection thing alone, working just on the libzypp level and changing the status of packages or patterns there.

For the YaST Qt UI, the YQPackageSelector / YQPatternSelector widgets work purely on the Qt and libzypp level; no other YaST infrastructure involved, in particular no Ruby (or formerly YCP) interpreter, no libyui-level widgets, no bindings between Qt / C++ and Ruby / YaST-core, nothing. So it's not too hard to rip all that part out of YaST and create a standalone program from it.

For the NCurses UI, the NCPackageSelector / NCPatternSelector create a lot of libyui widgets (inheriting YWidget / NCWidget) and use a lot of libyui calls to glue them together; and all that of course still needs a lot of YaST / libyui / libyui-ncurses infrastructure. So NCurses is out of scope here.

Preparatory Work: Initializing the Package Subsystem

To see if this is feasible at all, the existing UI examples needed some fixing to check what is needed on that level. That was the make-or-break decision: Would it be realistically possible to set the needed environment in libzypp up (without being stranded in the middle of that task alone at the end of the hack week)?

Yes, it is: That part is already working:

https://github.com/yast/yast-ycp-ui-bindings/pull/71

Go there for a screenshot

That's already halfway there.

The complete Ruby code of this example is here. The real thing will be pure C++ without any YaST dependencies.

The Plan

• DONE: Clone libyui where libyui (high-level), libyui-qt, libyui-qt-pkg live

---

Digital art wallpapers for openSUSE Leap and Tumbleweed by lkocman

Description

We've enrolled set of new wallpapers to both Leap 16 and Tumbleweed as part of https://news.opensuse.org/2024/10/26/leap-tw-get-makeovers/

We've previewed digital art wallpapers which were not part of the initial drop. I'd like to spend time on hackweek to finialize my current Taipei (mountains) and Mauritius digital art wallpapers.

Goals

Finalize existing two digital art wallpapers for Leap and Tumbleweed https://github.com/openSUSE/branding/issues/155 Make them available as part of leap16 dir in https://github.com/openSUSE/wallpapers and update (This makes is available to Tumbleweed users as well). Update https://build.opensuse.org/package/show/X11:common:Factory/wallpapers-openSUSE-extra && Leap:16.0 && Factory.

Resources

https://github.com/openSUSE/branding/issues/155 The mauritius draft can be found in https://github.com/lkocman/geo-wallpapers

---