Agama installer on-line demo by lslezak

Description

The Agama installer provides a quite complex user interface. We have some screenshots on the web page but as it is basically a web application it would be nice to have some on-line demo where users could click and check it live.

The problem is that the Agama server directly accesses the hardware (storage probing) and loads installation repositories. We cannot easily mock this in the on-line demo so the easiest way is to have just a read-only demo. You could explore the configuration options but you could not change anything, all changes would be ignored.

The read-only demo would be a bit limited but I still think it would be useful for potential users get the feeling of the new Agama installer and get familiar with it before using in a real installation.

As a proof of concept I already created this on-line demo.

The implementation basically builds Agama in two modes - recording mode where it saves all REST API responses and replay mode where it for the REST API requests returns the previously recorded responses. Recording in the browser is inconvenient and error prone, there should be some scripting instead (see below).

Goals

• Create an Agama on-line demo which can be easily tested by users
• The Agama installer is still in alpha phase and in active development, the online demo needs to be easily rebuilt with the latest Agama version
• Ideally there should be some automation so the demo page is rebuilt automatically without any developer interactions (once a day or week?)

TODO

• Use OpenAPI to get all Agama REST API endpoints, write a script which queries all the endpoints automatically and saves the collected data to a file (see this related PR).
• Write a script for starting an Agama VM (use libvirt/qemu?), the script should ensure we always use the same virtual HW so if we need to dump the latest REST API state we get the same (or very similar data). This should ensure the demo page does not change much regarding the storage proposal etc...
• Fix changing the product, currently it gets stuck after clicking the "Select" button.
• Move the mocking data (the recorded REST API responses) outside the Agama sources, it's too big and will be probably often updated. To avoid messing the history keep it in a separate GitHub repository
• Allow changing the UI language
• Display some note (watermark) in the page so it is clear it is a read-only demo (probably with some version or build date to know how old it is)
• Automation for building new demo page from the latest sources. There should be some check which ensures the recorded data still matches the OpenAPI specification.

Changing the UI language

This will be quite tricky because selecting the proper translation file is done on the server side. We would probably need to completely re-implement the logic in the browser side and adapt the server for that.

Also some REST API responses contain translated texts (storage proposal, pattern names in software). We would need to query the respective endpoints in all supported languages and return the correct response in runtime according to the currently selected language.

Resources

• Agama sources
• Experimental proof of concept demo
• The respective source code change

---

Small healthcheck tool for Longhorn by mbrookhuis

Project Description

We have often problems (e.g. pods not starting) that are related to PVCs not running, cluster (nodes) not all up or deployments not running or completely running. This all prevents administration activities. Having something that can regular be run to validate the status of the cluster would be helpful, and not as of today do a lot of manual tasks.

As addition (read enough time), we could add changing reservation, adding new disks, etc. --> This didn't made it. But the scripts can easily be adopted.

This tool would decrease troubleshooting time, giving admins rights to the rancher GUI and could be used in automation.

Goal for this Hackweek

At the end we should have a small python tool that is doing a (very) basic health check on nodes, deployments and PVCs. First attempt was to make it in golang, but that was taking to much time.

Overview

This tool will run a simple healthcheck on a kubernetes cluster. It will perform the following actions:

• node check: This will check all nodes, and display the status and the k3s version. If the status of the nodes is not "Ready" (this should be only reported), the cluster will be reported as having problems

• deployment check: This check will list all deployments, and display the number of expected replicas and the used replica. If there are unused replicas this will be displayed. The cluster will be reported as having problems.

• pvc check: This check will list of all pvc's, and display the status and the robustness. If the robustness is not "Healthy", the cluster will be reported as having problems.

If there is a problem registered in the checks, there will be a warning that the cluster is not healthy and the program will exit with 1.

The script has 1 mandatory parameter and that is the kubeconf of the cluster or of a node off the cluster.

The code is writen for Python 3.11, but will also work on 3.6 (the default with SLES15.x). There is a venv present that will contain all needed packages. Also, the script can be run on the cluster itself or any other linux server.

Installation

To install this project, perform the following steps:

• Create the directory /opt/k8s-check

mkdir /opt/k8s-check

• Copy all the file to this directory and make the following changes:

chmod +x k8s-check.py

---

CVE portal for SUSE Rancher products by gmacedo

Description

Currently it's a bit difficult for users to quickly see the list of CVEs affecting images in Rancher, RKE2, Harvester and Longhorn releases. Users need to individually look for each CVE in the SUSE CVE database page - https://www.suse.com/security/cve/ . This is not optimal, because those CVE pages are a bit hard to read and contain data for all SLE and BCI products too, making it difficult to easily see only the CVEs affecting the latest release of Rancher, for example. We understand that certain costumers are only looking for CVE data for Rancher and not SLE or BCI.

Goals

The objective is to create a simple to read and navigate page that contains only CVE data related to Rancher, RKE2, Harvester and Longhorn, where it's easy to search by a CVE ID, an image name or a release version. The page should also provide the raw data as an exportable CSV file.

It must be an MVP with the minimal amount of effort/time invested, but still providing great value to our users and saving the wasted time that the Rancher Security team needs to spend by manually sharing such data. It might not be long lived, as it can be replaced in 2-3 years with a better SUSE wide solution.

Resources

• The page must be simple and easy to read.
• The UI/UX must be as straightforward as possible with minimal visual noise.
• The content must be created automatically from the raw data that we already have internally.
• It must be updated automatically on a daily basis and on ad-hoc runs (when needed).
• The CVE status must be aligned with VEX.
• The raw data must be exportable as CSV file.
• Ideally it will be written in Go or pure Shell script with basic HTML and no external dependencies in CSS or JS.

---

Rancher microfrontend extensions by ftorchia

Description

Rancher UI Extensions allow users, developers, partners, and customers to extend and enhance the Rancher UI. Extensions are Helm charts that can only be installed once into a cluster. The charts contain a UI built package that is downloaded and linked to the Host UI at runtime; this means that the extension pkg needs to be implemented using the same technology and have the same APIs as Rancher UI.

Goals

We want to create a new type of Rancher extension, based on microfrontend pattern. The extension is served in a docker container in the k8s clusters and embedded in the host UI; this would guarantee us to be able to create extensions unrelated to the rancher UI architecture, in any technology.

Non Goals

We want to apply the microfrontend pattern to the product-level extensions; we don't want to apply it to cluster-level extensions.

Resources

rancher-extension-microfrontend, Rancher extensions

---

Rancher/k8s Trouble-Maker by tonyhansen

Project Description

When studying for my RHCSA, I found trouble-maker, which is a program that breaks a Linux OS and requires you to fix it. I want to create something similar for Rancher/k8s that can allow for troubleshooting an unknown environment.

Goal for this Hackweek

Create a basic framework for creating Rancher/k8s cluster lab environments as needed for the Break/Fix Create at least 5 modules that can be applied to the cluster and require troubleshooting

Resources

https://github.com/rancher/terraform-provider-rancher2 https://github.com/rancher/tf-rancher-up

---

A CLI for Harvester by mohamed.belgaied

[comment]: # Harvester does not officially come with a CLI tool, the user is supposed to interact with Harvester mostly through the UI [comment]: # Though it is theoretically possible to use kubectl to interact with Harvester, the manipulation of Kubevirt YAML objects is absolutely not user friendly. [comment]: # Inspired by tools like multipass from Canonical to easily and rapidly create one of multiple VMs, I began the development of Harvester CLI. Currently, it works but Harvester CLI needs some love to be up-to-date with Harvester v1.0.2 and needs some bug fixes and improvements as well.

Project Description

Harvester CLI is a command line interface tool written in Go, designed to simplify interfacing with a Harvester cluster as a user. It is especially useful for testing purposes as you can easily and rapidly create VMs in Harvester by providing a simple command such as: harvester vm create my-vm --count 5 to create 5 VMs named my-vm-01 to my-vm-05.

Harvester CLI is functional but needs a number of improvements: up-to-date functionality with Harvester v1.0.2 (some minor issues right now), modifying the default behaviour to create an opensuse VM instead of an ubuntu VM, solve some bugs, etc.

Github Repo for Harvester CLI: https://github.com/belgaied2/harvester-cli

Done in previous Hackweeks

• Create a Github actions pipeline to automatically integrate Harvester CLI to Homebrew repositories: DONE
• Automatically package Harvester CLI for OpenSUSE / Redhat RPMs or DEBs: DONE

Goal for this Hackweek

The goal for this Hackweek is to bring Harvester CLI up-to-speed with latest Harvester versions (v1.3.X and v1.4.X), and improve the code quality as well as implement some simple features and bug fixes.

Some nice additions might be: * Improve handling of namespaced objects * Add features, such as network management or Load Balancer creation ? * Add more unit tests and, why not, e2e tests * Improve CI * Improve the overall code quality * Test the program and create issues for it

Issue list is here: https://github.com/belgaied2/harvester-cli/issues

Resources

The project is written in Go, and using client-go the Kubernetes Go Client libraries to communicate with the Harvester API (which is Kubernetes in fact). Welcome contributions are:

• Testing it and creating issues
• Documentation
• Go code improvement

What you might learn

Harvester CLI might be interesting to you if you want to learn more about:

• GitHub Actions
• Harvester as a SUSE Product
• Go programming language
• Kubernetes API

---

Rancher microfrontend extensions by ftorchia

Description

Rancher UI Extensions allow users, developers, partners, and customers to extend and enhance the Rancher UI. Extensions are Helm charts that can only be installed once into a cluster. The charts contain a UI built package that is downloaded and linked to the Host UI at runtime; this means that the extension pkg needs to be implemented using the same technology and have the same APIs as Rancher UI.

Goals

We want to create a new type of Rancher extension, based on microfrontend pattern. The extension is served in a docker container in the k8s clusters and embedded in the host UI; this would guarantee us to be able to create extensions unrelated to the rancher UI architecture, in any technology.

Non Goals

We want to apply the microfrontend pattern to the product-level extensions; we don't want to apply it to cluster-level extensions.

Resources

rancher-extension-microfrontend, Rancher extensions

---