Agama Expert Partitioner by joseivanlopez

Description

Agama is a new Linux installer that will be very likely used for SLES 16.

It offers an UI for configuring the target system (language, patterns, network, etc). One of the more complex sections is the storage configuration, which is going to be revamped. This project consists on exploring the possibility of having something similar to the YaST Expert Partitioner for Agama.

Goals

• Explore different approaches for the storage UI in Agama.

Improve various phones kernel mainline support (Qualcomm, Exynos, MediaTek) by pvorel

Similar to previous hackweeks ( https://hackweek.opensuse.org/projects/improve-qualcomm-soc-msm8994-slash-msm8992-kernel-mainline-support, https://hackweek.opensuse.org/projects/test-mainline-kernel-on-an-older-qualcomm-soc-msm89xx-explore-mainline-kernel-qualcomm-mainlining) try to improve kernel mainline support of various phones.

Result

In the end I concentrated again to msm8994:

• 507aae9a3549c ("arm64: dts: qcom: msm8994-angler: Enable power key, volume up/down") (will be in kernel 6.14)
• Testing of c910544d22347 ("arm64: dts: qcom: msm8994: Describe USB interrupts") (will be in kernel 6.14)
• WIP USB support for msm8994

Investigate non-booting Forlinx OKMX8MX-C board (aarch64) by a_faerber

Description

In the context of a SUSE customer inquiry last year, a Forlinx OKMX8MX-C arm64 board had been relayed to me from China that a customer was not successful booting SUSE Linux Micro on. Typically this happens when the vendor's bootloader (e.g., U-Boot) is not configured properly (e.g., U-Boot's distro boot) to be compliant with Arm SystemReady Devicetree (formerly IR) band. Unfortunately I could not immediately get it to emit any output, to even diagnose why it wasn't working. There was no public documentation on the vendor's website to even confirm I was checking the right UARTs.

Earlier this year (2024) I happened to meet the ODM/OEM, Forlinx, at Embedded World 2024 in Nuremberg and again the Monday before Hackweek 24 at Electronica 2024 in Munich. The big puzzle was that the PCB print "OKMX8MX-C" does not match any current Forlinx product, there being OKMX8MM-C and OKMX8MP-C products with the Mini and Plus variants of NXP i.MX 8M family instead. One suggestion from Forlinx staff was to double-check the DIP switches on the board for boot mode selection.

Goals

Double-check the board name and investigate further what may be wrong with this board.

Resources

none

Progress

• The board name is indeed as spelled above, not matching any product on forlinx.net.
• The DIP switches were set to boot from microSD.
• Changing the DIP switches to eMMC boot did result in UART1 RS-232 output! (although at times garbled with the cable supplied and USB adapter used)
• As feared, it did not automatically load our GRUB from USB.
• Booting our GRUB manually from USB (via eMMC U-Boot commands fatload+bootefi) was unsuccessful, with partially Chinese error messages.
• This confirmed the initial suspicion, already shared with Forlinx at Embedded World 2024, that the Forlinx System-on-Module's boot firmware was not Arm SystemReady Devicetree compliant and that a firmware update would be necessary to remedy that.
• The microSD card turned out not to contain a bootable image but to only include Chinese-language board documentation (dated 20220507) and BSP files. They used a diverging name of OKMX8MQ-C.