Extending KubeVirtBMC's capability by adding Redfish support by zchang

Description

In Hack Week 23, we delivered a project called KubeBMC (renamed to KubeVirtBMC now), which brings the good old-fashioned IPMI ways to manage virtual machines running on KubeVirt-powered clusters. This opens the possibility of integrating existing bare-metal provisioning solutions like Tinkerbell with virtualized environments. We even received an inquiry about transferring the project to the KubeVirt organization. So, a proposal was filed, which was accepted by the KubeVirt community, and the project was renamed after that. We have many tasks on our to-do list. Some of them are administrative tasks; some are feature-related. One of the most requested features is Redfish support.

Goals

Extend the capability of KubeVirtBMC by adding Redfish support. Currently, the virtbmc component only exposes IPMI endpoints. We need to implement another simulator to expose Redfish endpoints, as we did with the IPMI module. We aim at a basic set of functionalities:

• Power management
• Boot device selection
• Virtual media mount (this one is not so basic )

Resources

• DMTF/Redfish-Interface-Emulator: The Redfish Interface Emulator can emulate a Redfish-based interface statically (GET) or dynamically (POST, PATCH, DELETE)

---

Small healthcheck tool for Longhorn by mbrookhuis

Project Description

We have often problems (e.g. pods not starting) that are related to PVCs not running, cluster (nodes) not all up or deployments not running or completely running. This all prevents administration activities. Having something that can regular be run to validate the status of the cluster would be helpful, and not as of today do a lot of manual tasks.

As addition (read enough time), we could add changing reservation, adding new disks, etc. --> This didn't made it. But the scripts can easily be adopted.

This tool would decrease troubleshooting time, giving admins rights to the rancher GUI and could be used in automation.

Goal for this Hackweek

At the end we should have a small python tool that is doing a (very) basic health check on nodes, deployments and PVCs. First attempt was to make it in golang, but that was taking to much time.

Overview

This tool will run a simple healthcheck on a kubernetes cluster. It will perform the following actions:

• node check: This will check all nodes, and display the status and the k3s version. If the status of the nodes is not "Ready" (this should be only reported), the cluster will be reported as having problems

• deployment check: This check will list all deployments, and display the number of expected replicas and the used replica. If there are unused replicas this will be displayed. The cluster will be reported as having problems.

• pvc check: This check will list of all pvc's, and display the status and the robustness. If the robustness is not "Healthy", the cluster will be reported as having problems.

If there is a problem registered in the checks, there will be a warning that the cluster is not healthy and the program will exit with 1.

The script has 1 mandatory parameter and that is the kubeconf of the cluster or of a node off the cluster.

The code is writen for Python 3.11, but will also work on 3.6 (the default with SLES15.x). There is a venv present that will contain all needed packages. Also, the script can be run on the cluster itself or any other linux server.

Installation

To install this project, perform the following steps:

• Create the directory /opt/k8s-check

mkdir /opt/k8s-check

• Copy all the file to this directory and make the following changes:

chmod +x k8s-check.py

---

Learn enough Golang and hack on CoreDNS by jkuzilek

Description

I'm implementing a split-horizon DNS for my home Kubernetes cluster to be able to access my internal (and external) services over the local network through public domains. I managed to make a PoC with the k8s_gateway plugin for CoreDNS. However, I soon found out it responds with IPs for all Gateways assigned to HTTPRoutes, publishing public IPs as well as the internal Loadbalancer ones.

To remedy this issue, a simple filtering mechanism has to be implemented.

Goals

• Learn an acceptable amount of Golang
• Implement GatewayClass (and IngressClass) filtering for k8s_gateway
• Deploy on homelab cluster
• Profit?

Resources

• https://github.com/ori-edge/k8s_gateway/issues/36
• https://github.com/coredns/coredns/issues/2465#issuecomment-593910983

EDIT: Feature mostly complete. An unfinished PR lies here. Successfully tested working on homelab cluster.

---

Rancher/k8s Trouble-Maker by tonyhansen

Project Description

When studying for my RHCSA, I found trouble-maker, which is a program that breaks a Linux OS and requires you to fix it. I want to create something similar for Rancher/k8s that can allow for troubleshooting an unknown environment.

Goal for this Hackweek

Create a basic framework for creating Rancher/k8s cluster lab environments as needed for the Break/Fix Create at least 5 modules that can be applied to the cluster and require troubleshooting

Resources

https://github.com/rancher/terraform-provider-rancher2 https://github.com/rancher/tf-rancher-up

---

A CLI for Harvester by mohamed.belgaied

[comment]: # Harvester does not officially come with a CLI tool, the user is supposed to interact with Harvester mostly through the UI [comment]: # Though it is theoretically possible to use kubectl to interact with Harvester, the manipulation of Kubevirt YAML objects is absolutely not user friendly. [comment]: # Inspired by tools like multipass from Canonical to easily and rapidly create one of multiple VMs, I began the development of Harvester CLI. Currently, it works but Harvester CLI needs some love to be up-to-date with Harvester v1.0.2 and needs some bug fixes and improvements as well.

Project Description

Harvester CLI is a command line interface tool written in Go, designed to simplify interfacing with a Harvester cluster as a user. It is especially useful for testing purposes as you can easily and rapidly create VMs in Harvester by providing a simple command such as: harvester vm create my-vm --count 5 to create 5 VMs named my-vm-01 to my-vm-05.

Harvester CLI is functional but needs a number of improvements: up-to-date functionality with Harvester v1.0.2 (some minor issues right now), modifying the default behaviour to create an opensuse VM instead of an ubuntu VM, solve some bugs, etc.

Github Repo for Harvester CLI: https://github.com/belgaied2/harvester-cli

Done in previous Hackweeks

• Create a Github actions pipeline to automatically integrate Harvester CLI to Homebrew repositories: DONE
• Automatically package Harvester CLI for OpenSUSE / Redhat RPMs or DEBs: DONE

Goal for this Hackweek

The goal for this Hackweek is to bring Harvester CLI up-to-speed with latest Harvester versions (v1.3.X and v1.4.X), and improve the code quality as well as implement some simple features and bug fixes.

Some nice additions might be: * Improve handling of namespaced objects * Add features, such as network management or Load Balancer creation ? * Add more unit tests and, why not, e2e tests * Improve CI * Improve the overall code quality * Test the program and create issues for it

Issue list is here: https://github.com/belgaied2/harvester-cli/issues

Resources

The project is written in Go, and using client-go the Kubernetes Go Client libraries to communicate with the Harvester API (which is Kubernetes in fact). Welcome contributions are:

• Testing it and creating issues
• Documentation
• Go code improvement

What you might learn

Harvester CLI might be interesting to you if you want to learn more about:

• GitHub Actions
• Harvester as a SUSE Product
• Go programming language
• Kubernetes API

---