early stage kdump support by mbrugger

Project Description

When we experience a early boot crash, we are not able to analyze the kernel dump, as user-space wasn't able to load the crash system. The idea is to make the crash system compiled into the host kernel (think of initramfs) so that we can create a kernel dump really early in the boot process.

Goal for the Hackweeks

1. Investigate if this is possible and the implications it would have (done in HW21)
2. Hack up a PoC (done in HW22 and HW23)
3. Prepare RFC series (giving it's only one week, we are entering wishful thinking territory here).

update HW23

• I was able to include the crash kernel into the kernel Image.
• I'll need to find a way to load that from init/main.c:start_kernel() probably after kcsan_init()
• I workaround for a smoke test was to hack kexec_file_load() systemcall which has two problems:
  1. My initramfs in the porduction kernel does not have a new enough kexec version, that's not a blocker but where the week ended
  2. As the crash kernel is part of init.data it will be already stale once I can call kexec_file_load() from user-space.

The solution is probably to rewrite the POC so that the invocation can be done from init.text (that's my theory) but I'm not sure if I can reuse the kexec infrastructure in the kernel from there, which I rely on heavily.

update HW24

• Day1
  • rebased on v6.12 with no problems others then me breaking the config
  • setting up a new compilation and qemu/virtme env
  • getting desperate as nothing works that used to work
• Day 2
  • getting to call the invocation of loading the early kernel from __init after kcsan_init()

• Day 3

  • fix problem of memdup not being able to alloc so much memory... use 64K page sizes for now
  • code refactoring
  • I'm now able to load the crash kernel
  • When using virtme I can boot into the crash kernel, also it doesn't boot completely (major milestone!), crash in elfcorehdr_read_notes()

• Day 4

  • crash systems crashes (no pun intended) in copy_old_mempage() link; will need to understand elfcorehdr...
  • call path vmcore_init() -> parse_crash_elf_headers() -> elfcorehdr_read() -> read_from_oldmem() -> copy_oldmem_page() -> copy_to_iter()

• Day 5

  • hacking arch/arm64/kernel/crash_dump.c:copy_old_mempage() to see if crash system really starts. It does.
  • fun fact: retested with more reserved memory and with UEFI FW, host kernel crashes in init but directly starts the crash kernel, so it works (somehow) \o/

• TODOs

  • fix elfcorehdr so that we actually can make use of all this...
  • test where in the boot __init() chain we can/should call kexec_early_dump()

pudc - A PID 1 process that barks to the internet by mssola

Description

As a fun exercise in order to dig deeper into the Linux kernel, its interfaces, the RISC-V architecture, and all the dragons in between; I'm building a blog site cooked like this:

• The backend is written in a mixture of C and RISC-V assembly.
• The backend is actually PID1 (for real, not within a container).
• We poll and parse incoming HTTP requests ourselves.
• The frontend is a mere HTML page with htmx.

The project is meant to be Linux-specific, so I'm going to use io_uring, pidfs, namespaces, and Linux-specific features in order to drive all of this.

I'm open for suggestions and so on, but this is meant to be a solo project, as this is more of a learning exercise for me than anything else.

Goals

• Have a better understanding of different Linux features from user space down to the kernel internals.
• Most importantly: have fun.

Resources

• https://github.com/mssola/pudc

Smart lighting with Pico 2 by jmodak

Description

I am trying to create a smart-lighting project with a Raspberry Pi Pico that reacts to a movie's visuals and audio that involves combining two distinct functions: ambient screen lighting(visual response) and sound-reactive lighting(audio response)

Goals

• Visuals: Capturing the screen's colour requires an external device to analyse screen content and send colour data to the MCU via serial communication.
• Audio: A sound sensor module connected directly to the Pico that can detect sound volume.
• Pico 2W: The MCU receives data fro, both inputs and controls an LED strip.

Resources

• Raspberry Pi Pico 2 W
• RGB LED strip
• Sound detecting sensor
• Power supply
• breadboard and wires

Creating test suite using LLM on existing codebase of a solar router by fcrozat

Description

Two years ago, I evaluated solar routers as part of hackweek24, I've assembled one and it is running almost smoothly.

However, its code quality is not perfect and the codebase doesn't have any testcase (which is tricky, since it is embedded code and rely on getting external data to react).

Before improving the code itself, a testsuite should be created to ensure code additional don't cause regression.

Goals

Create a testsuite, allowing to test solar router code in a virtual environment. Using LLM to help to create this test suite.

If succesful, try to improve the codebase itself by having it reviewed by LLM.

Resources

Solar router github project

Create openSUSE images for Arm/RISC-V boards by avicenzi

Project Description

Create openSUSE images (or test generic EFI images) for Arm and/or RISC-V boards that are not yet supported.

Goal for this Hackweek

Create bootable images of Tumbleweed for SBCs that currently have no images available or are untested.

Consider generic EFI images where possible, as some boards can hold a bootloader.

Document in the openSUSE Wiki how to flash and use the image for a given board.

Hack Week 22

• NanoPC T4

Hack Week 21

• NanoPi M4B
• Radxa Zero

Resources

• https://en.opensuse.org/Portal:Arm
• https://en.opensuse.org/Portal:RISC-V

pudc - A PID 1 process that barks to the internet by mssola

Description

As a fun exercise in order to dig deeper into the Linux kernel, its interfaces, the RISC-V architecture, and all the dragons in between; I'm building a blog site cooked like this:

• The backend is written in a mixture of C and RISC-V assembly.
• The backend is actually PID1 (for real, not within a container).
• We poll and parse incoming HTTP requests ourselves.
• The frontend is a mere HTML page with htmx.

The project is meant to be Linux-specific, so I'm going to use io_uring, pidfs, namespaces, and Linux-specific features in order to drive all of this.

I'm open for suggestions and so on, but this is meant to be a solo project, as this is more of a learning exercise for me than anything else.

Goals

• Have a better understanding of different Linux features from user space down to the kernel internals.
• Most importantly: have fun.

Resources

• https://github.com/mssola/pudc

Testing and adding GNU/Linux distributions on Uyuni by juliogonzalezgil

Join the Gitter channel! https://gitter.im/uyuni-project/hackweek

Uyuni is a configuration and infrastructure management tool that saves you time and headaches when you have to manage and update tens, hundreds or even thousands of machines. It also manages configuration, can run audits, build image containers, monitor and much more!

Currently there are a few distributions that are completely untested on Uyuni or SUSE Manager (AFAIK) or just not tested since a long time, and could be interesting knowing how hard would be working with them and, if possible, fix whatever is broken.

For newcomers, the easiest distributions are those based on DEB or RPM packages. Distributions with other package formats are doable, but will require adapting the Python and Java code to be able to sync and analyze such packages (and if salt does not support those packages, it will need changes as well). So if you want a distribution with other packages, make sure you are comfortable handling such changes.

No developer experience? No worries! We had non-developers contributors in the past, and we are ready to help as long as you are willing to learn. If you don't want to code at all, you can also help us preparing the documentation after someone else has the initial code ready, or you could also help with testing :-)

The idea is testing Salt and Salt-ssh clients, but NOT traditional clients, which are deprecated.

To consider that a distribution has basic support, we should cover at least (points 3-6 are to be tested for both salt minions and salt ssh minions):

1. Reposync (this will require using spacewalk-common-channels and adding channels to the .ini file)
2. Onboarding (salt minion from UI, salt minion from bootstrap scritp, and salt-ssh minion) (this will probably require adding OS to the bootstrap repository creator)
3. Package management (install, remove, update...)
4. Patching
5. Applying any basic salt state (including a formula)
6. Salt remote commands
7. Bonus point: Java part for product identification, and monitoring enablement
8. Bonus point: sumaform enablement (https://github.com/uyuni-project/sumaform)
9. Bonus point: Documentation (https://github.com/uyuni-project/uyuni-docs)
10. Bonus point: testsuite enablement (https://github.com/uyuni-project/uyuni/tree/master/testsuite)

If something is breaking: we can try to fix it, but the main idea is research how supported it is right now. Beyond that it's up to each project member how much to hack :-)

• If you don't have knowledge about some of the steps: ask the team
• If you still don't know what to do: switch to another distribution and keep testing.

This card is for EVERYONE, not just developers. Seriously! We had people from other teams helping that were not developers, and added support for Debian and new SUSE Linux Enterprise and openSUSE Leap versions :-)

Pending

Debian 13

The new version of the beloved Debian GNU/Linux OS

Seems to be a Debian 12 derivative, so adding it could be quite easy.

• [ ] Reposync (this will require using spacewalk-common-channels and adding channels to the .ini file)
• W] Onboarding (salt minion from UI, salt minion from bootstrap script, and salt-ssh minion) (this will probably require adding OS to the bootstrap repository creator)
• [ ] Package management (install, remove, update...)
• [ ] Patching (if patch information is available, could require writing some code to parse it, but IIRC we have support for Ubuntu already). Probably not for Debian as IIRC we don't support patches yet.
• [ ] Applying any basic salt state (including a formula)
• [ ] Salt remote commands
• [ ] Bonus point: Java part for product identification, and monitoring enablement
• [ ] Bonus point: sumaform enablement (https://github.com/uyuni-project/sumaform)
• [ ] Bonus point: Documentation (https://github.com/uyuni-project/uyuni-docs)