Create a DRM driver for VGA video cards by tdz

Yes, those VGA video cards. The goal of this project is to implement a DRM graphics driver for such devices. While actual hardware is hard to obtain or even run today, qemu emulates VGA output.

VGA has a number of limitations, which make this project interesting.

• There are only 640x480 pixels (or less) on the screen. That resolution is also a soft lower limit imposed by DRM. It's mostly a problem for desktop environments though.
• Desktop environments assume 16 million colors, but there are only 16 colors with VGA. VGA's 256 color palette is not available at 640x480. We can choose those 16 colors freely. The interesting part is how to choose them. We have to build a palette for the displayed frame and map each color to one of the palette's 16 entries. This is called dithering, and VGA's limitations are a good opportunity to learn about dithering algorithms.
• VGA has an interesting memory layout. Most graphics devices use linear framebuffers, which store the pixels byte by byte. VGA uses 4 bitplanes instead. Plane 0 holds all bits 0 of all pixels. Plane 1 holds all bits 1 of all pixels, and so on.

The driver will probably not be useful to many people. But, if finished, it can serve as test environment for low-level hardware. There's some interest in supporting old Amiga and Atari framebuffers in DRM. Those systems have similar limitations as VGA, but are harder to obtain and test with. With qemu, the VGA driver could fill this gap.

Apart from the Wikipedia entry, good resources on VGA are at osdev.net and FreeVGA

---

Modularization and Modernization of cifs.ko for Enhanced SMB Protocol Support by hcarvalho

Creator:
Enzo Matsumiya ematsumiya@suse.de @ SUSE Samba team
Members:
Henrique Carvalho henrique.carvalho@suse.com @ SUSE Samba team

Description

Split cifs.ko in 2 separate modules; one for SMB 1.0 and 2.0.x, and another for SMB 2.1, 3.0, and 3.1.1.

Goals

Primary

Start phasing out/deprecation of older SMB versions

Secondary

• Clean up of the code (with focus on the newer versions)
• Update cifs-utils
• Update documentation
• Improve backport workflow (see below)

Technical details

Ideas for the implementation.

• fs/smb/client/{old,new}.c to generate the respective modules
  • Maybe don't create separate folders? (re-evaluate as things progresses!)
• Remove server->{ops,vals} if possible
• Clean up fs_context.* -- merge duplicate options into one, handle them in userspace utils
• Reduce code in smb2pdu.c -- tons of functions with very similar init/setup -> send/recv -> handle/free flow
• Restructure multichannel
  • Treat initial connection as "channel 0" regardless of multichannel enabled/negotiated status, proceed with extra channels accordingly
  • Extra channel just point to "channel 0" as the primary server, no need to allocate an extra TCPServerInfo for each one
• Authentication mechanisms
  • Modernize algorithms (references: himmelblau, IAKERB/Local KDC, SCRAM, oauth2 (Azure), etc.

---

Modernize ocfs2 by goldwynr

Ocfs2 has gone into a stage of neglect and disrepair. Modernize the code to generate enough interest.

Goals: * Change the mount sequence to use fscontext * Move from using bufferhead to bio/folios * Use iomap * Run it through xfstests

---

Improve UML page fault handler by ptesarik

Description

Improve UML handling of segmentation faults in kernel mode. Although such page faults are generally caused by a kernel bug, it is annoying if they cause an infinite loop, or panic the kernel. More importantly, a robust implementation allows to write KUnit tests for various guard pages, preventing potential kernel self-protection regressions.

Goals

Convert the UML page fault handler to use oops_* helpers, go through a few review rounds and finally get my patch series merged in 6.14.

Resources

Wrong initial attempt: https://lore.kernel.org/lkml/20231215121431.680-1-petrtesarik@huaweicloud.com/T/

---

Hacking on sched_ext by flonnegren

Description

Sched_ext upstream has some interesting issues open for grabs:

• core event counters
• topology: Use cpumasks

Goals

Send patches to sched_ext upstream

Also set up perfetto to trace some of the example schedulers.

Resources

https://github.com/sched-ext/scx

---

WebUI for your data by avicenzi

A single place to view every bit of data you have.

Problem

You have too much data and you are a data hoarder.

• Family photos and videos.
• Lots of eBooks, TV Shows, Movies, and else.
• Boxes full of papers (taxes, invoices, IDs, certificates, exams, and else).
• Bank account statements (multiple currencies, countries, and people).

Maybe you have some data on S3, some on your NAS, and some on your local PC.

• How do you get it all together?
• How do you link a bank transaction to a product invoice?
• How to tag any object type and create a collection out of it (mix videos, photos, PDFs, transactions)?
• How to store this? file/folder structure does not work, everything is linked together

Project Description

The idea is a place where you can throw all your data, photos, videos, documents, binaries, and else.

Create photo albums, document collections, add tags across multiple file-formats, link content, and else.

The UI should be easy to use, where the data is not important for now (could be all S3 or local drive).

Similar proposals

The closest I found so far is https://perkeep.org/, but this is not what I'm looking for.

Goal for this Hackweek

Create a web UI, in Svelte ideally, perhaps React.

It should be able to show photos and videos at least.

Resources

None so far, this is just an idea.

---