New openSUSE-welcome by lkocman

Project Description

Let's revisit our existing openSUSE welcome app.

My goal was to show Leap 16 in a new coat. Welcome app adds to the first time use experience. We've recently added donation button to our existing welcome.

Some things that I recently wanted to address were EOL and possibly upgrade notification.

I've already done some experiments with mint welcome app, but not sure if it's better than the existing one.

There is also a PR to rework existing app https://github.com/openSUSE/openSUSE-welcome/pull/36 (this should be considered as an option too)

Goal for this Hackweek

New welcome app, possibly with EOL notification for Leap.

1) Welcome application(s) with (rebrand changes) maintained under github.com/openSUSE

2) Application is submitted to openSUSE:Factory && openSUSE:Leap:16.0

3) Updated needles in openQA (probably post hackweek)

Resources

Reddit discussion about the best welcome app out there.

Github repo for the current welcome app.

---

YQPkg - Bringing the Single Package Selection Back to Life by shundhammer

tl;dr

Rip out the high-level YQPackageSelector widget from YaST and make it a standalone Qt program without any YaST dependencies.

See section "Result" at the bottom for the current status after the hack week.

Current Status

See the development status issue at the GitHub repo.

tl;dr: It's usable now with all the key features.

It does real package installation / removal / update with reasonable user feedback.

The Past and the Present

We used to have and still have a powerful software selection with the YaST sw_single module (and the YaST patterns counterpart): You can select software down to the package level, you can easily select one of many available package versions, you can select entire patterns - or just view them and pick individual packages from patterns.

You can search packages based on name, description, "requires" or "provides" level, and many more things.

The Future

YaST is on its way out, to be replaced by the new Agama installer and Cockpit for system administration. Those tools can do many things, but fine-grained package selection is not among them. And there are also no other Open Source tools available for that purpose that even come close to the YaST package selection.

Many aspects of YaST have become obsolete over the years; many subsystems now come with a good default configuration, or they can configure themselves automatically. Just think about sound or X11 configuration; when did you last need to touch them?

For others, the desktops bring their own tools (e.g. printers), or there are FOSS configuration tools (NetworkManager, BlueMan). Most YaST modules are no longer needed, and for many others there is a replacement in tools like Cockpit.

But no longer having a powerful fine-grained package selection like in YaST sw_single will hurt. Big time. At least until there is an adequate replacement, many users will want to keep it.

The Idea

YaST sw_single always revolved around a powerful high-level widget on the abstract UI level. Libyui has low-level widgets like YPushButton, YCheckBox, YInputField, more advanced ones like YTable, YTree; and some few very high-level ones like YPackageSelector and YPatternSelector that do the whole package selection thing alone, working just on the libzypp level and changing the status of packages or patterns there.

For the YaST Qt UI, the YQPackageSelector / YQPatternSelector widgets work purely on the Qt and libzypp level; no other YaST infrastructure involved, in particular no Ruby (or formerly YCP) interpreter, no libyui-level widgets, no bindings between Qt / C++ and Ruby / YaST-core, nothing. So it's not too hard to rip all that part out of YaST and create a standalone program from it.

For the NCurses UI, the NCPackageSelector / NCPatternSelector create a lot of libyui widgets (inheriting YWidget / NCWidget) and use a lot of libyui calls to glue them together; and all that of course still needs a lot of YaST / libyui / libyui-ncurses infrastructure. So NCurses is out of scope here.

Preparatory Work: Initializing the Package Subsystem

To see if this is feasible at all, the existing UI examples needed some fixing to check what is needed on that level. That was the make-or-break decision: Would it be realistically possible to set the needed environment in libzypp up (without being stranded in the middle of that task alone at the end of the hack week)?

Yes, it is: That part is already working:

https://github.com/yast/yast-ycp-ui-bindings/pull/71

---

Create an Android app for Syncthing as part of the Syncthing Tray project by mkittler

Description

There's already an app but code/features already in Syncthing Tray could be reused to create a nicer app with additional features like managing ignore patterns more easily. The additional UI code for the app could then in turn be re-used by other parts of Syncthing Tray, e.g. to implement further steps in the wizard as requested by some users. This way one "UI wrapper codebase" could serve GNU/Linux, Windows and Android (and in theory MacOS) at the same time which is kind of neat.

Goals

• DONE: Learn more about development for Android and development of UIs with Qt Quick
• DONE: Create an experimental app reusing as much existing Syncthing Tray code as possible
• DONE: Build Syncthing as a library also for Android and use it in the app (already done but needs further testing and integration with the rest of the app configuration)
• DONE: Update the Syncthing Tray website, documentation
• Extend the app so it has at least a start page and an import that can cope with an export of the other app
• Update forum thread
• Upload an experimental build on GitHub
• Extend the Syncthing API to download single files on demand (instead of having to sync the whole directory or use ignore patterns)

Resources

• Android SDK/NDK and emulator
• Qt Quick

---

New features in openqa-trigger-from-obs for openQA by jlausuch

Description

Implement new features in openqa-trigger-from-obs to make xml more flexible.

Goals

One of the features to be implemented: - Possibility to define "VERSION" and "ARCH" variables per flavor instead of global.

Resources

https://github.com/os-autoinst/openqa-trigger-from-obs

---

Enhance UV openQA helper script by mdonis

Description

A couple months ago an UV openQA helper script was created to help/automate the searching phase inside openQA for a given MU to test. The script searches inside all our openQA job groups (qam-sle) related with a given MU and generates an output suitable to add (copy & paste) inside the update log.

This is still a WIP and could use some enhancements.

Goals

• Move script from bash to python: this would be useful in case we want to include this into MTUI in the future. The script will be separate from MTUI for now. The idea is to have this as a CLI tool using the click library or something similar.
• Add option to look for jobs in other sections inside aggregated updates: right now, when looking for regression tests under aggregated updates for a given MU, the script only looks inside the Core MU job group. This is where most of the regression tests we need are located, but some MUs have their regression tests under the YaST/Containers/Security MU job groups. We should keep the Core MU group as a default, but add an option to be able to look into other job groups under aggregated updates.
• Remove the -a option: this option is used to indicate the update ID and is mandatory right now. This is a bit weird and goes against posix stardards. It was developed this way in order to avoid using positional parameters. This problem should be fixed if we move the script to python.

Some other ideas to consider:

• Look into the QAM dashboard API. This has more info on each MU, could use this to link general openQA build results, whether the related RR is approved or not, etc
• Make it easier to see if there's regression tests for a package in an openQA test build. Check if there's a possibility to search for tests that have the package name in them inside each testsuite.
• Unit testing?

More ideas TBD

Resources

https://github.com/os-autoinst/scripts/blob/master/openqa-search-maintenance-core-jobs

https://confluence.suse.com/display/maintenanceqa/Guide+on+how+to+test+Updates

Post-Hackweek update

All major features were implemented. Unit tests are still in progress, and project will be moved to the SUSE github org once everything's done. https://github.com/mjdonis/oqa-search

---

Learn obs/ibs sync tool by xlai

Description

Once images/repo are built from IBS/OBS, there is a tool to sync the image from IBS/OBS to openqa asset directory and trigger openqa jobs accordingly.

Goals

Check how the tool is implemented, and be capable to add/modify our needed images/repo in future by ourselves.

Resources

• https://github.com/os-autoinst/openqa-trigger-from-obs
• https://gitlab.suse.de/openqa/openqa-trigger-from-ibs-plugin/-/tree/master?ref_type=heads

---

Make more sense of openQA test results using AI by livdywan

Description

AI has the potential to help with something many of us spend a lot of time doing which is making sense of openQA logs when a job fails.

User Story

Allison Average has a puzzled look on their face while staring at log files that seem to make little sense. Is this a known issue, something completely new or maybe related to infrastructure changes?

Goals

• Leverage a chat interface to help Allison
• Create a model from scratch based on data from openQA
• Proof of concept for automated analysis of openQA test results

Bonus

• Use AI to suggest solutions to merge conflicts
  • This would need a merge conflict editor that can suggest solving the conflict
• Use image recognition for needles

Resources

• TensorFlow
• open-webui
• openQA instance of openSUSE
• openQA documentation

Timeline

Day 1

• Conversing with open-webui to teach me how to create a model based on openQA test results
  • Asking for example code using TensorFlow in Python
  • Discussing log files to explore what to analyze
  • Drafting a new project called Testimony (based on Implementing a containerized Python action) - the project name was also suggested by the assistant

Day 2

• Using NotebookLLM (Gemini) to produce conversational versions of blog posts
  • Writing openQA tests in Python
  • Developing in distrobox containers
• Researching the possibility of creating a project logo with AI
  • Asking open-webui, persons with prior experience and conducting a web search for advice

Highlights

• I briefly tested compared models to see if they would make me more productive. Between llama, gemma and mistral there was no amazing difference in the results for my case.
• Convincing the chat interface to produce code specific to my use case required very explicit instructions.
• Asking for advice on how to use open-webui itself better was frustratingly unfruitful both in trivial and more advanced regards.
• Documentation on source materials used by LLM's and tools for this purpose seems virtually non-existent - specifically if a logo can be generated based on particular licenses

Outcomes

• Chat interface-supported development is providing good starting points and open-webui being open source is more flexible than Gemini. Although currently some fancy features such as grounding and generated podcasts are missing.
• Allison still has to be very experienced with openQA to use a chat interface for test review. Publicly available system prompts would make that easier, though.

---

Hack on isotest-ng - a rust port of isotovideo (os-autoinst aka testrunner of openQA) by szarate

Description

Some time ago, I managed to convince ByteOtter to hack something that resembles isotovideo but in Rust, not because I believe that Perl is dead, but more because there are certain limitations in the perl code (how it was written), and its always hard to add new functionalities when they are about implementing a new backend, or fixing bugs (Along with people complaining that Perl is dead, and that they don't like it)

In reality, I wanted to see if this could be done, and ByteOtter proved that it could be, while doing an amazing job at hacking a vnc console, and helping me understand better what RuPerl needs to work.

I plan to keep working on this for the next few years, and while I don't aim for feature completion or replacing isotovideo tih isotest-ng (name in progress), I do plan to be able to use it on a daily basis, using specialized tooling with interfaces, instead of reimplementing everything in the backend

Todo

• Add make targets for testability, e.g "spawn qemu and type"
• Add image search matching algorithm
• Add a Null test distribution provider
• Add a Perl Test Distribution Provider
• Fix unittests https://github.com/os-autoinst/isotest-ng/issues/5
• Research OpenTofu how to add new hypervisors/baremetal to OpenTofu
• Add an interface to openQA cli

Goals

• Implement at least one of the above, prepare proposals for GSoC
• Boot a system via it's BMC

Resources

See https://github.com/os-autoinst/isotest-ng

---