pudc - A PID 1 process that barks to the internet by mssola

Description

As a fun exercise in order to dig deeper into the Linux kernel, its interfaces, the RISC-V architecture, and all the dragons in between; I'm building a blog site cooked like this:

• The backend is written in a mixture of C and RISC-V assembly.
• The backend is actually PID1 (for real, not within a container).
• We poll and parse incoming HTTP requests ourselves.
• The frontend is a mere HTML page with htmx.

The project is meant to be Linux-specific, so I'm going to use io_uring, pidfs, namespaces, and Linux-specific features in order to drive all of this.

I'm open for suggestions and so on, but this is meant to be a solo project, as this is more of a learning exercise for me than anything else.

Goals

• Have a better understanding of different Linux features from user space down to the kernel internals.
• Most importantly: have fun.

Resources

• https://github.com/mssola/pudc

---

Smart lighting with Pico 2 by jmodak

Description

I am trying to create a smart-lighting project with a Raspberry Pi Pico that reacts to a movie's visuals and audio that involves combining two distinct functions: ambient screen lighting(visual response) and sound-reactive lighting(audio response)

Goals

• Visuals: Capturing the screen's colour requires an external device to analyse screen content and send colour data to the MCU via serial communication.
• Audio: A sound sensor module connected directly to the Pico that can detect sound volume.
• Pico 2W: The MCU receives data fro, both inputs and controls an LED strip.

Resources

• Raspberry Pi Pico 2 W
• RGB LED strip
• Sound detecting sensor
• Power supply
• breadboard and wires

---

Port OTPClient to GTK >= 4.18 by pstivanin

Project Description

OTPClient is currently using GTK3 and cannot easily be ported to GTK4. Since GTK4 came out, there have been quite some big changes. Also, there are now some new deprecation that will take effect with GTK5 (and are active starting from 4.10 as warnings), so I need to think ahead and port OTPClient without using any of those deprecated features.

Goal for this Hackweek

• fix the last 3 opened issues (https://github.com/paolostivanin/OTPClient/issues/402, https://github.com/paolostivanin/OTPClient/issues/404, https://github.com/paolostivanin/OTPClient/issues/406) and release a new version
• continue the rewrite from where we left last year
• if possible, finally close this 6 years old issue: https://github.com/paolostivanin/OTPClient/issues/123

---

x64id: An x86/x64 instruction disassembler by m.crivellari

Description

This is an old side project. An x86/x64 machine code decoder. It is useful to get instructions' length and identify each of its fields.

Example:

C7 85 68 FF FF FF 00 00 00 00

This is the instruction:

MOV DWORD PTR SS:[LOCAL.38],0

What follows are some of the information collected by the disassembler, based on the specific instruction:

RAW bytes (hex): C7 85 68 FF FF FF 00 00 00 00
Instr. length: 10
Print instruction fields:
        Located Prefixes 0:

        OP: 0xC7
        mod_reg_rm: 0x85
        disp (4): 0xFFFFFF68
        Iimm: 0x0

Lacks the mnemonic representation: from the previous machine code is not able to produce the "MOV..." instruction, for example.

Goals

The goal is almost easy: partially implement the mnemonic representation. I have already started during the weekend, likely tomorrow I will push the branch!

Resources

• The project: https://github.com/DispatchCode/x64-Instruction-Decoder/
• This is useful to avoid gdb and objdump in local: https://defuse.ca/online-x86-assembler.htm
• Another interesting resource is https://godbolt.org/

Progress

• An initial implementation can be found at: https://github.com/DispatchCode/x64-Instruction-Decoder/tree/mnemonic-support It is described under the "Mnemonic translation" in the README file!

Let's consider this example:

[...other bytes...] 43 89 44 B5 00 01 00 [...other bytes...]

---

Improve the picotm Transaction Manager by tdz

Picotm is a system-level transaction manager. It provides transactional semantics to low-level C operations, such as

• memory access,
• modifying data structures,
• (some) file I/O, and
• common interfaces from the C Standard Library and POSIX.

Picotm also handles error detection and recovery for all it's functionality. It's fully modular, so new functionality can be added.

For the Hackweek, I want to dedicate some time to picotm. I want to finish some of the refactoring work that I have been working on. If there's time left, I'd like to investigate two-phase commits and how to support them in picotm.

Picotm is available at http://picotm.org/.

---

A CLI for Harvester by mohamed.belgaied

Harvester does not officially come with a CLI tool, the user is supposed to interact with Harvester mostly through the UI. Though it is theoretically possible to use kubectl to interact with Harvester, the manipulation of Kubevirt YAML objects is absolutely not user friendly. Inspired by tools like multipass from Canonical to easily and rapidly create one of multiple VMs, I began the development of Harvester CLI. Currently, it works but Harvester CLI needs some love to be up-to-date with Harvester v1.0.2 and needs some bug fixes and improvements as well.

Project Description

Harvester CLI is a command line interface tool written in Go, designed to simplify interfacing with a Harvester cluster as a user. It is especially useful for testing purposes as you can easily and rapidly create VMs in Harvester by providing a simple command such as: harvester vm create my-vm --count 5 to create 5 VMs named my-vm-01 to my-vm-05.

Harvester CLI is functional but needs a number of improvements: up-to-date functionality with Harvester v1.0.2 (some minor issues right now), modifying the default behaviour to create an opensuse VM instead of an ubuntu VM, solve some bugs, etc.

Github Repo for Harvester CLI: https://github.com/belgaied2/harvester-cli

Done in previous Hackweeks

• Create a Github actions pipeline to automatically integrate Harvester CLI to Homebrew repositories: DONE
• Automatically package Harvester CLI for OpenSUSE / Redhat RPMs or DEBs: DONE

Goal for this Hackweek

The goal for this Hackweek is to bring Harvester CLI up-to-speed with latest Harvester versions (v1.3.X and v1.4.X), and improve the code quality as well as implement some simple features and bug fixes.

Some nice additions might be: * Improve handling of namespaced objects * Add features, such as network management or Load Balancer creation ? * Add more unit tests and, why not, e2e tests * Improve CI * Improve the overall code quality * Test the program and create issues for it

Issue list is here: https://github.com/belgaied2/harvester-cli/issues

Resources

The project is written in Go, and using client-go the Kubernetes Go Client libraries to communicate with the Harvester API (which is Kubernetes in fact). Welcome contributions are:

• Testing it and creating issues
• Documentation
• Go code improvement

What you might learn

Harvester CLI might be interesting to you if you want to learn more about:

• GitHub Actions
• Harvester as a SUSE Product
• Go programming language
• Kubernetes API
• Kubevirt API objects (Manipulating VMs and VM Configuration in Kubernetes using Kubevirt)

---

Kudos aka openSUSE Recognition Platform by lkocman

Description

Relevant blog post at news-o-o

I started the Kudos application shortly after Leap 16.0 to create a simple, friendly way to recognize people for their work and contributions to openSUSE. There’s so much more to our community than just submitting requests in OBS or gitea we have translations (not only in Weblate), wiki edits, forum and social media moderation, infrastructure maintenance, booth participation, talks, manual testing, openQA test suites, and more!

Goals

• Kudos under github.com/openSUSE/kudos with build previews aka netlify

• Have a kudos.opensuse.org instance running in production

• Build an easy-to-contribute recognition platform for the openSUSE community a place where everyone can send and receive appreciation for their work, across all areas of contribution.

• In the future, we could even explore reward options such as vouchers for t-shirts or other community swag, small tokens of appreciation to make recognition more tangible.

Resources

(Do not create new badge requests during hackweek, unless you'll make the badge during hackweek)

• Source code: openSUSE/kudos
• Badges: openSUSE/kudos-badges
• Issue tracker: kudos/issues

---

Create a page with all devel:languages:perl packages and their versions by tinita

Description

Perl projects now live in git: https://src.opensuse.org/perl

It would be useful to have an easy way to check which version of which perl module is in devel:languages:perl. Also we have meta overrides and patches for various modules, and it would be good to have them at a central place, so it is easier to lookup, and we can share with other vendors.

I did some initial data dump here a while ago: https://github.com/perlpunk/cpan-meta

But I never had the time to automate this.

I can also use the data to check if there are necessary updates (currently it uses data from download.opensuse.org, so there is some delay and it depends on building).

Goals

• Have a script that updates a central repository (e.g. https://src.opensuse.org/perl/_metadata) with metadata by looking at https://src.opensuse.org/perl/_ObsPrj (check if there are any changes from the last run)
• Create a HTML page with the list of packages (use Javascript and some table library to make it easily searchable)

Resources

Results

• https://perlpunk.github.io/opensuse-perl-meta/
• https://github.com/perlpunk/opensuse-perl-meta

Day 1

• First part of the code which retrieves data from https://src.opensuse.org/perl/_ObsPrj with submodules and creates a YAML and a JSON file.
• Repo: https://github.com/perlpunk/opensuse-perl-meta
• Also a first version of the HTML is live: https://perlpunk.github.io/opensuse-perl-meta/

Day 2

• HTML Page has now links to src.opensuse.org and the date of the last update, plus a short info at the top
• Code is now 100% covered by tests: https://app.codecov.io/gh/perlpunk/opensuse-perl-meta
• I used the modern perl class feature, which makes perl classes even nicer and shorter. See example
• Tests
  • I tried out the mocking feature of the modern Test2::V0 library which provides call tracking. See example
  • I tried out comparing data structures with the new Test2::V0 library. It let's you compare parts of the structure with the like function, which only compares the date that is mentioned in the expected data. example

Day 3

• Added various things to the table
  • Dependencies column
  • Show popup with info for cpanspec, patches and dependencies
  • Added last date / commit to the data export.

Plan: With the added date / commit we can now daily check _ObsPrj for changes and only fetch the data for changed packages.

Day 4

---

Switch software-o-o to store repomd in a database by hennevogel

Description

The openSUSE Software portal is a web app to explore binary packages of openSUSE distributions. Kind of like an package manager / app store.

https://software.opensuse.org/

This app has been around forever (August 2007) and it's architecture is a bit brittle. It acts as a frontend to the OBS distributions and published binary search APIs, calculates and caches a lot of stuff in memory and needs code changes nearly every openSUSE release to keep up.

As you can imagine, it's a heavy user of the OBS API, especially when caches are cold.

Goals

I want to change the app to cache repomod data in a (postgres) database structure

• Distributions have many Repositories
• Repositories have many Packages
• Packages have many Patches

The UI workflows will be as following

• As an admin I setup Distribution and it's repositories
• As an admin I sync all repositories repomd files into to the database
• As a user I browse a Distribution by category
• As a user I search for Package of a Distribution in it's Repositories
• As a user I extend the search to Package build on OBS for this Distribution

This has a couple of pro's:

• Less traffic on the OBS API as the usual Packages are inside the database
• Easier base to add features to this page. Like comments, ratings, openSUSE specific screenshots etc.
• Separating the Distribution package search from searching through OBS will hopefully make more clear for newbies that enabling extra repositories is kind of dangerous.

And one con:

• You can't search for packages build for foreign distributions with this app anymore (although we could consume their repomd etc. but I doubt we have the audience on an opensuse.org domain...)

TODO

• Introduce a PG database
• Add clockworkd as scheduler and delayed_job as ActiveJob backend
• Introduce ActiveStorage
• Build initial data model
• Introduce repomd to database sync
  • Adapt repomd sync to Leap 16.0 repomod layout changes (single arch, no update repo)
  • Make repomd sync idempotent
• Introduce database search
• Setup foreman to run rails s and rake jobs:workoff
• Adapt UI
  • Build Category Browsing
  • Build Admin Distribution CRUD interface

---

A CLI for Harvester by mohamed.belgaied

Harvester does not officially come with a CLI tool, the user is supposed to interact with Harvester mostly through the UI. Though it is theoretically possible to use kubectl to interact with Harvester, the manipulation of Kubevirt YAML objects is absolutely not user friendly. Inspired by tools like multipass from Canonical to easily and rapidly create one of multiple VMs, I began the development of Harvester CLI. Currently, it works but Harvester CLI needs some love to be up-to-date with Harvester v1.0.2 and needs some bug fixes and improvements as well.

Project Description

Harvester CLI is a command line interface tool written in Go, designed to simplify interfacing with a Harvester cluster as a user. It is especially useful for testing purposes as you can easily and rapidly create VMs in Harvester by providing a simple command such as: harvester vm create my-vm --count 5 to create 5 VMs named my-vm-01 to my-vm-05.

Harvester CLI is functional but needs a number of improvements: up-to-date functionality with Harvester v1.0.2 (some minor issues right now), modifying the default behaviour to create an opensuse VM instead of an ubuntu VM, solve some bugs, etc.

Github Repo for Harvester CLI: https://github.com/belgaied2/harvester-cli

Done in previous Hackweeks

• Create a Github actions pipeline to automatically integrate Harvester CLI to Homebrew repositories: DONE
• Automatically package Harvester CLI for OpenSUSE / Redhat RPMs or DEBs: DONE

Goal for this Hackweek

The goal for this Hackweek is to bring Harvester CLI up-to-speed with latest Harvester versions (v1.3.X and v1.4.X), and improve the code quality as well as implement some simple features and bug fixes.

Some nice additions might be: * Improve handling of namespaced objects * Add features, such as network management or Load Balancer creation ? * Add more unit tests and, why not, e2e tests * Improve CI * Improve the overall code quality * Test the program and create issues for it

Issue list is here: https://github.com/belgaied2/harvester-cli/issues

Resources

The project is written in Go, and using client-go the Kubernetes Go Client libraries to communicate with the Harvester API (which is Kubernetes in fact). Welcome contributions are:

• Testing it and creating issues
• Documentation
• Go code improvement

What you might learn

Harvester CLI might be interesting to you if you want to learn more about:

• GitHub Actions
• Harvester as a SUSE Product
• Go programming language
• Kubernetes API
• Kubevirt API objects (Manipulating VMs and VM Configuration in Kubernetes using Kubevirt)

---