Learn enough Golang and hack on CoreDNS by jkuzilek

Description

I'm implementing a split-horizon DNS for my home Kubernetes cluster to be able to access my internal (and external) services over the local network through public domains. I managed to make a PoC with the k8s_gateway plugin for CoreDNS. However, I soon found out it responds with IPs for all Gateways assigned to HTTPRoutes, publishing public IPs as well as the internal Loadbalancer ones.

To remedy this issue, a simple filtering mechanism has to be implemented.

Goals

• Learn an acceptable amount of Golang
• Implement GatewayClass (and IngressClass) filtering for k8s_gateway
• Deploy on homelab cluster
• Profit?

Resources

• https://github.com/ori-edge/k8s_gateway/issues/36
• https://github.com/coredns/coredns/issues/2465#issuecomment-593910983

EDIT: Feature mostly complete. An unfinished PR lies here. Successfully tested working on homelab cluster.

---

Contribute to terraform-provider-libvirt by pinvernizzi

Description

The SUSE Manager (SUMA) teams' main tool for infrastructure automation, Sumaform, largely relies on terraform-provider-libvirt. That provider is also widely used by other teams, both inside and outside SUSE.

It would be good to help the maintainers of this project and give back to the community around it, after all the amazing work that has been already done.

If you're interested in any of infrastructure automation, Terraform, virtualization, tooling development, Go (...) it is also a good chance to learn a bit about them all by putting your hands on an interesting, real-use-case and complex project.

Goals

• Get more familiar with Terraform provider development and libvirt bindings in Go
• Solve some issues and/or implement some features
• Get in touch with the community around the project

Resources

• CONTRIBUTING readme
• Go libvirt library in use by the project
• Terraform plugin development
• "Good first issue" list

---

iSCSI integration in Warewulf by ncuralli

Description

This Hackweek project aims to enhance Warewulf’s capabilities by adding iSCSI support, enabling both remote boot and flexible mounting of iSCSI devices within the filesystem. The project, which already handles NFS, DHCP, and iPXE, will be extended to offer iSCSI services as well, centralizing all necessary services for provisioning and booting cluster nodes.

Goals

• iSCSI Boot Option: Enable nodes to boot directly from iSCSI volumes
• Mounting iSCSI Volumes within the Filesystem: Implement support for mounting iSCSI devices at various points within the filesystem

Resources

https://warewulf.org/

Steps

• add generic framework to handle remote ressource/filesystems to wwctl [ ]
• add iSCSI handling to wwctl configure [ ]
• add iSCSI to dracut files [ ]
• test it [ ]

---

Dartboard TUI by IValentin

Description

Our scalability and performance testing swiss-army knife tool Dartboard is a major WIP so why not add more scope creep? Dartboard is a cli tool which enables users to:

• Define a "Dart" config file as YAML which defines the various components to be created/setup when Dartboard runs its commands
• Spin up infrastructure utilizing opentofu/terraform providers
• Setup K3s or RKE2 clusters on the newly created infrastructure
• Deploy Rancher (with or without downstream cluster), rancher-monitoring (Grafana + Prometheus)
• Create resources in-bulk within the newly created Rancher cluster (ConfigMaps, Secrets, Users, Roles, etc.)
• Run various performance and scalability tests via k6
• Export/Import various tracked metrics (WIP)

Given all these features (and the features to come), it can be difficult to onboard and transfer knowledge of the tool. With a TUI, Dartboard's usage complexity can be greatly reduced!

Goals

• Create a TUI for Dartboard's "subcommands"
• Gain more familiarity with Dartboard and create a more user-friendly interface to enable others to use it
• Stretch Create a TUI workflow for generating a Dart file

Resources

https://github.com/charmbracelet/bubbletea

---

Automate PR process by idplscalabrini

Description

This project is to streamline and enhance the pr review process by adding automation for identifying some issues like missing comments, identifying sensitive information in the PRs like credentials. etc. By leveraging GitHub Actions and golang hooks we can focus more on high-level reviews

Goals

• Automate lints and code validations on Github actions
• Automate code validation on hook
• Implement a bot to pre-review the PRs

Resources

Golang hooks and Github actions

---

Small healthcheck tool for Longhorn by mbrookhuis

Project Description

We have often problems (e.g. pods not starting) that are related to PVCs not running, cluster (nodes) not all up or deployments not running or completely running. This all prevents administration activities. Having something that can regular be run to validate the status of the cluster would be helpful, and not as of today do a lot of manual tasks.

As addition (read enough time), we could add changing reservation, adding new disks, etc. --> This didn't made it. But the scripts can easily be adopted.

This tool would decrease troubleshooting time, giving admins rights to the rancher GUI and could be used in automation.

Goal for this Hackweek

At the end we should have a small python tool that is doing a (very) basic health check on nodes, deployments and PVCs. First attempt was to make it in golang, but that was taking to much time.

Overview

This tool will run a simple healthcheck on a kubernetes cluster. It will perform the following actions:

• node check: This will check all nodes, and display the status and the k3s version. If the status of the nodes is not "Ready" (this should be only reported), the cluster will be reported as having problems

• deployment check: This check will list all deployments, and display the number of expected replicas and the used replica. If there are unused replicas this will be displayed. The cluster will be reported as having problems.

• pvc check: This check will list of all pvc's, and display the status and the robustness. If the robustness is not "Healthy", the cluster will be reported as having problems.

If there is a problem registered in the checks, there will be a warning that the cluster is not healthy and the program will exit with 1.

The script has 1 mandatory parameter and that is the kubeconf of the cluster or of a node off the cluster.

The code is writen for Python 3.11, but will also work on 3.6 (the default with SLES15.x). There is a venv present that will contain all needed packages. Also, the script can be run on the cluster itself or any other linux server.

Installation

To install this project, perform the following steps:

• Create the directory /opt/k8s-check

mkdir /opt/k8s-check

• Copy all the file to this directory and make the following changes:

chmod +x k8s-check.py

---

Setup Kanidm as OIDC provider on Kubernetes by jkuzilek

Description

I am planning to upgrade my homelab Kubernetes cluster to the next level and need an OIDC provider for my services, including K8s itself.

Goals

• Successfully configure and deploy Kanidm on homelab cluster
• Integrate with K8s auth
• Integrate with other services (Envoy Gateway, Container Registry, future deployment of Forgejo?)

Resources

• https://kanidm.github.io/kanidm/stable/

---

ddflare: (Dynamic)DNS management via Cloudflare API in Kubernetes by fgiudici

Description

ddflare is a project started a couple of weeks ago to provide DDNS management using v4 Cloudflare APIs: Cloudflare offers management via APIs and access tokens, so it is possible to register a domain and implement a DynDNS client without any other external service but their API.

Since ddflare allows to set any IP to any domain name, one could manage multiple A and ALIAS domain records. Wouldn't be cool to allow full DNS control from the project and integrate it with your Kubernetes cluster?

Goals

Main goals are:

1. add containerized image for ddflare
2. extend ddflare to be able to add and remove DNS records (and not just update existing ones)
3. add documentation, covering also a sample pod deployment for Kubernetes
4. write a ddflare Kubernetes operator to enable domain management via Kubernetes resources (using kubebuilder)

Available tasks and improvements tracked on ddflare github.

Resources

• https://github.com/fgiudici/ddflare
• https://developers.cloudflare.com/api/
• https://book.kubebuilder.io

---

Integrate Backstage with Rancher Manager by nwmacd

Description

Backstage (backstage.io) is an open-source, CNCF project that allows you to create your own developer portal. There are many plugins for Backstage.

This could be a great compliment to Rancher Manager.

Goals

Learn and experiment with Backstage and look at how this could be integrated with Rancher Manager. Goal is to have some kind of integration completed in this Hack week.

Progress

Screen shot of home page at the end of Hackweek:

Day One

• Got Backstage running locally, understanding configuration with HTTPs.
• Got Backstage embedded in an IFRAME inside of Rancher
• Added content into the software catalog (see: https://backstage.io/docs/features/techdocs/getting-started/)
• Understood more about the entity model

Day Two

• Connected Backstage to the Rancher local cluster and configured the Kubernetes plugin.
• Created Rancher theme to make the light theme more consistent with Rancher

Days Three and Day Four

• Created two backend plugins for Backstage:

  1. Catalog Entity Provider - this imports users from Rancher into Backstage
  2. Auth Provider - uses the proxied sign-in pattern to check the Rancher session cookie, to user that to authenticate the user with Rancher and then log them into Backstage by connecting this to the imported User entity from the catalog entity provider plugin.

• With this in place, you can single-sign-on between Rancher and Backstage when it is deployed within Rancher. Note this is only when running locally for development at present

Day Five

• Start to build out a production deployment for all of the above
• Made some progress, but hit issues with the authentication and proxying when running proxied within Rancher, which needs further investigation

---

Multi-pod, autoscalable Elixir application in Kubernetes using K8s resources by socon

Description

Elixir / Erlang use their own solutions to create clusters that work together. Kubernetes provide its own orchestration. Due to the nature of the BEAM, it looks a very promising technology for applications that run in Kubernetes and requite to be always on, specifically if they are created as web pages using Phoenix.

Goals

• Investigate and provide solutions that work in Phoenix LiveView using Kubernetes resources, so a multi-pod application can be used
• Provide an end to end example that creates and deploy a container from source code.

Resources

https://github.com/dwyl/phoenix-liveview-counter-tutorial https://github.com/propedeutica/elixir-k8s-counter

---