Create DRM drivers for VESA and EFI framebuffers by tdz

Description

We already have simpledrm for firmware framebuffers. But the driver is originally for ARM boards, not PCs. It is already overloaded with code to support both use cases. At the same time it is missing possible features for VESA and EFI, such as palette modes or EDID support. We should have DRM drivers for VESA and EFI interfaces. The infrastructure exists already and initial drivers can be forked from simpledrm.

Goals

• Initially, a bare driver for VESA or EFI should be created. It can take functionality from simpledrm.
• Then we can begin to add additional features. The boot loader can provide EDID data. With VGA hardware, VESA can support paletted modes or color management. Example code exists in vesafb.

---

Modernize ocfs2 by goldwynr

Ocfs2 has gone into a stage of neglect and disrepair. Modernize the code to generate enough interest.

Goals: * Change the mount sequence to use fscontext * Move from using bufferhead to bio/folios * Use iomap * Run it through xfstests

---

Modularization and Modernization of cifs.ko for Enhanced SMB Protocol Support by hcarvalho

Creator:
Enzo Matsumiya ematsumiya@suse.de @ SUSE Samba team
Members:
Henrique Carvalho henrique.carvalho@suse.com @ SUSE Samba team

Description

Split cifs.ko in 2 separate modules; one for SMB 1.0 and 2.0.x, and another for SMB 2.1, 3.0, and 3.1.1.

Goals

Primary

Start phasing out/deprecation of older SMB versions

Secondary

• Clean up of the code (with focus on the newer versions)
• Update cifs-utils
• Update documentation
• Improve backport workflow (see below)

Technical details

Ideas for the implementation.

• fs/smb/client/{old,new}.c to generate the respective modules
  • Maybe don't create separate folders? (re-evaluate as things progresses!)
• Remove server->{ops,vals} if possible
• Clean up fs_context.* -- merge duplicate options into one, handle them in userspace utils
• Reduce code in smb2pdu.c -- tons of functions with very similar init/setup -> send/recv -> handle/free flow
• Restructure multichannel
  • Treat initial connection as "channel 0" regardless of multichannel enabled/negotiated status, proceed with extra channels accordingly
  • Extra channel just point to "channel 0" as the primary server, no need to allocate an extra TCPServerInfo for each one
• Authentication mechanisms
  • Modernize algorithms (references: himmelblau, IAKERB/Local KDC, SCRAM, oauth2 (Azure), etc.

---

RISC-V emulator in GLSL capable of running Linux by favogt

Description

There are already numerous ways to run Linux and some programs through emulation in a web browser (e.g. x86 and riscv64 on https://bellard.org/jslinux/), but none use WebGL/WebGPU to run the emulation on the GPU.

I already made a PoC of an AArch64 (64-bit Arm) emulator in OpenCL which is unfortunately hindered by a multitude of OpenCL compiler bugs on all platforms (Intel with beignet or the new compute runtime and AMD with Mesa Clover and rusticl). With more widespread and thus less broken GLSL vs. OpenCL and the less complex implementation requirements for RV32 (especially 32bit integers instead of 64bit), that should not be a major problem anymore.

Goals

Write an RISC-V system emulator in GLSL that is capable of booting Linux and run some userspace programs interactively. Ideally it is small enough to work on online test platforms like Shaderoo with a custom texture that contains bootstrap code, kernel and initrd.

Minimum:

riscv32 without FPU (RV32 IMA) and MMU (µClinux), running Linux in M-mode and userspace in U-mode.

Stretch goals:

FPU support, S-Mode support with MMU, SMP. Custom web frontend with more possibilities for I/O (disk image, network?).

Resources

RISC-V ISA Specifications
Shaderoo
OpenGL 4.5 Quick Reference Card

Result as of Hackweek 2024

WebGL turned out to be insufficient, it only supports OpenGL ES 3.0 but imageLoad/imageStore needs ES 3.1. So we switched directions and had to write a native C++ host for the shaders.

As of Hackweek Friday, the kernel attempts to boot and outputs messages, but panics due to missing memory regions.

Since then, some bugs were fixed and enough hardware emulation implemented, so that now Linux boots with framebuffer support and it's possible to log in and run programs!

The repo with a demo video is available at https://github.com/Vogtinator/risky-v

---

Create a DRM driver for VGA video cards by tdz

Yes, those VGA video cards. The goal of this project is to implement a DRM graphics driver for such devices. While actual hardware is hard to obtain or even run today, qemu emulates VGA output.

VGA has a number of limitations, which make this project interesting.

• There are only 640x480 pixels (or less) on the screen. That resolution is also a soft lower limit imposed by DRM. It's mostly a problem for desktop environments though.
• Desktop environments assume 16 million colors, but there are only 16 colors with VGA. VGA's 256 color palette is not available at 640x480. We can choose those 16 colors freely. The interesting part is how to choose them. We have to build a palette for the displayed frame and map each color to one of the palette's 16 entries. This is called dithering, and VGA's limitations are a good opportunity to learn about dithering algorithms.
• VGA has an interesting memory layout. Most graphics devices use linear framebuffers, which store the pixels byte by byte. VGA uses 4 bitplanes instead. Plane 0 holds all bits 0 of all pixels. Plane 1 holds all bits 1 of all pixels, and so on.

The driver will probably not be useful to many people. But, if finished, it can serve as test environment for low-level hardware. There's some interest in supporting old Amiga and Atari framebuffers in DRM. Those systems have similar limitations as VGA, but are harder to obtain and test with. With qemu, the VGA driver could fill this gap.

Apart from the Wikipedia entry, good resources on VGA are at osdev.net and FreeVGA

---