one of the top features a distribution must always ship in a working state is wireless. Yet we have no way to test it in an automated way. To be able to do that via openQA we need qemu to emulate a wireless adapter. Whether it's emulating existing hardware or implements some virtio device that only works on Linux doesn't matter.
No Hackers yet
This project is part of:
Hack Week 10
Comments
-
over 12 years ago by vbotka | Reply
FYI. " wifi-test is fully automated test script for linux wireless drivers" available at http://wireless.kernel.org/en/developers/Testing/wifi-test . Some results of the tests can be found at http://users.suse.cz/~vbotka/wt/. Cisco AP, Dlink and ASUS AP with CLI (Command Line Interface). For example, Dlink DWL-8200 AP and Cisco1200 series AP is needed. HTH.
-vlado
-
over 12 years ago by bmwiedemann | Reply
So emulating the wireless adapter alone is not sufficient - it also needs an access point (either physical or virtual) to receive the raw wireless 802.11* data and respond to association requests etc.
-
over 12 years ago by a_faerber | Reply
Some years ago an Austrian university tried to contribute Wifi emulation but threw a big blob at us, mixing random Windows hacks with the actual adapter/network emulation code, and didn't care to clean that up. Probably still available in qemu-devel archives as a starting point.
-
Similar Projects
Q2Boot - A handy QEMU VM launcher by amanzini
Description
Q2Boot (Qemu Quick Boot) is a command-line tool that wraps QEMU to provide a streamlined experience for launching virtual machines. It automatically configures common settings like KVM acceleration, virtio drivers, and networking while allowing customization through both configuration files and command-line options.
The project originally was a personal utility in D, now recently rewritten in idiomatic Go. It lives at repository https://github.com/ilmanzo/q2boot
Goals
Improve the project, testing with different scenarios , address issues and propose new features. It will benefit of some basic integration testing by providing small sample disk images.
Updates
- Dec 1, 2025 : refactor command line options, added structured logging. Released v0.0.2
- Dec 2, 2025 : added external monitor via telnet option
- Dec 4, 2025 : released v0.0.3 with architecture auto-detection
- Dec 5, 2025 : filing new issues and general polishment. Designing E2E testing
Resources
SUSE KVM Best Practices - Focus on SAP Workloads and Use Cases by roseswe
Description
SUSE Best Practices around KVM, especially for SAP workloads. Early Google presentation already made from various customer projects and SUSE sources.
Goals
- Complete presentation we can reuse in SUSE Consulting projects
- 2025: Bring it to version 1.00 ready for customers
Resources
KVM (virt-manager) images
SUSE/SAP/KVM Best Practices
- https://documentation.suse.com/en-us/sles/15-SP6/single-html/SLES-virtualization/
- SAP Note 1522993 - "Linux: SAP on SUSE KVM - Kernel-based Virtual Machine" && 2284516 - SAP HANA virtualized on SUSE Linux Enterprise hypervisors https://me.sap.com/notes/2284516
- SUSECon24: [TUTORIAL-1253] Virtualizing SAP workloads with SUSE KVM || https://youtu.be/PTkpRVpX2PM
- SUSE Best Practices for SAP HANA on KVM - https://documentation.suse.com/sbp/sap-15/html/SBP-SLES4SAP-HANAonKVM-SLES15SP4/index.html
Backporting patches using LLM by jankara
Description
Backporting Linux kernel fixes (either for CVE issues or as part of general git-fixes workflow) is boring and mostly mechanical work (dealing with changes in context, renamed variables, new helper functions etc.). The idea of this project is to explore usage of LLM for backporting Linux kernel commits to SUSE kernels using LLM.
Goals
- Create safe environment allowing LLM to run and backport patches without exposing the whole filesystem to it (for privacy and security reasons).
- Write prompt that will guide LLM through the backporting process. Fine tune it based on experimental results.
- Explore success rate of LLMs when backporting various patches.
Resources
- Docker
- Gemini CLI
Repository
Current version of the container with some instructions for use are at: https://gitlab.suse.de/jankara/gemini-cli-backporter
bpftrace contribution by mkoutny
Description
bpftrace is a great tool, no need to sing odes to it here. It can access any kernel data and process them in real time. It provides helpers for some common Linux kernel structures but not all.
Goals
- set up bpftrace toolchain
- learn about bpftrace implementation and internals
- implement support for
percpu_counters - look into some of the first issues
- send a refined PR (on Thu)
Resources
pudc - A PID 1 process that barks to the internet by mssola
Description
As a fun exercise in order to dig deeper into the Linux kernel, its interfaces, the RISC-V architecture, and all the dragons in between; I'm building a blog site cooked like this:
- The backend is written in a mixture of C and RISC-V assembly.
- The backend is actually PID1 (for real, not within a container).
- We poll and parse incoming HTTP requests ourselves.
- The frontend is a mere HTML page with htmx.
The project is meant to be Linux-specific, so I'm going to use io_uring, pidfs, namespaces, and Linux-specific features in order to drive all of this.
I'm open for suggestions and so on, but this is meant to be a solo project, as this is more of a learning exercise for me than anything else.
Goals
- Have a better understanding of different Linux features from user space down to the kernel internals.
- Most importantly: have fun.
Resources
Add Qualcomm Snapdragon 765G (SM7250) basic device tree to mainline linux kernel by pvorel
Qualcomm Snapdragon 765G (SM7250) (smartphone SoC) has no support in the linux kernel, nor in u-boot. Try to add basic device tree support. The hardest part will be to create boot.img which will be accepted by phone.
UART is available for smartphone :).
dynticks-testing: analyse perf / trace-cmd output and aggregate data by m.crivellari
Description
dynticks-testing is a project started years ago by Frederic Weisbecker. One of the feature is to check the actual configuration (isolcpus, irqaffinity etc etc) and give feedback on it.
An important goal of this tool is to parse the output of trace-cmd / perf and provide more readable data, showing the duration of every events grouped by PID (showing also the CPU number, if the tasks has been migrated etc).
An example of data captured on my laptop (incomplete!!):
-0 [005] dN.2. 20310.270699: sched_wakeup: WaylandProxy:46380 [120] CPU:005
-0 [005] d..2. 20310.270702: sched_switch: swapper/5:0 [120] R ==> WaylandProxy:46380 [120]
...
WaylandProxy-46380 [004] d..2. 20310.295397: sched_switch: WaylandProxy:46380 [120] S ==> swapper/4:0 [120]
-0 [006] d..2. 20310.295397: sched_switch: swapper/6:0 [120] R ==> firefox:46373 [120]
firefox-46373 [006] d..2. 20310.295408: sched_switch: firefox:46373 [120] S ==> swapper/6:0 [120]
-0 [004] dN.2. 20310.295466: sched_wakeup: WaylandProxy:46380 [120] CPU:004
Output of noise_parse.py:
Task: WaylandProxy Pid: 46380 cpus: {4, 5} (Migrated!!!)
Wakeup Latency Nr: 24 Duration: 89
Sched switch: kworker/12:2 Nr: 1 Duration: 6
My first contribution is around Nov. 2024!
Goals
- add more features (eg cpuset)
- test / bugfix
Resources
- Frederic's public repository: https://git.kernel.org/pub/scm/linux/kernel/git/frederic/dynticks-testing.git/
- https://docs.kernel.org/timers/no_hz.html#testing
Progresses
isolcpus and cpusets implemented and merged in master: dynticks-testing.git commit