Description
The Microchip PIC64 family of RISC-V chipsets was announced this summer, with PIC64GX as first subfamily (with SiFive U54 CPU cores, same as Microchip PolarFire). Later families (PIC64-HPSC and PIC64HX) were announced to feature the long-awaited RISC-V Hypervisor Extension.
My pre-ordered PIC64GX1000 Curiosity board arrived the week before Hackweek 24.
Goals
I intend to investigate enabling openSUSE Tumbleweed riscv64 on this new chipset and board.
Resources
Progress
- Created udev rules for Curiosity board's FTDI based debug UARTs on USB-C - UART B has output from HSS / OpenSBI, UART C has output from U-Boot and kernel
- Modified the image https://download.opensuse.org/ports/riscv/tumbleweed/images/openSUSE-Tumbleweed-RISC-V-JeOS-efi.riscv64-2024.11.10-Build1.13.raw.xz (20241118) with gdisk to prepend a bootloader partition (copying the binary bootloader from the vendor-supplied microSD, ignoring excess partition size) and added the microchip/pic64gx-curiosity-kit.dtb file to the EFI System Partition (again from the vendor-supplied microSD)
- This boots into Tumbleweed! with ttyS1 by default (UART C)
Stretch goals
Investigate also the Microchip PolarFire SoC Discovery board.
Progress
The Microchip PolarFire Icicle board and BeagleV-Fire board had previously already been enabled by Torsten Duwe.
- Additional udev rules needed to be created for its FTDI UART bridge chip.
- The board ships with a "FIR filter" demo pre-flashed, not exposing any bootloader, only some demo output on UART C. The board will need to be flashed with a Microchip reference design for Linux.
- The board has an on-board Flash Pro Express JTAG debugger on USB-C. Proprietary Programming and Debug tools software is available from Microchip to download, requiring an account. This should then be able to flash the .job file.
- An in-progress patchset for OpenOCD is available in Gerrit, not yet in the openSUSE package. Presumably OpenOCD would not support Microchip's .job file format.
Comments
Be the first to comment!
Similar Projects
pudc - A PID 1 process that barks to the internet by mssola
Description
As a fun exercise in order to dig deeper into the Linux kernel, its interfaces, the RISC-V architecture, and all the dragons in between; I'm building a blog site cooked like this:
- The backend is written in a mixture of C and RISC-V assembly.
- The backend is actually PID1 (for real, not within a container).
- We poll and parse incoming HTTP requests ourselves.
- The frontend is a mere HTML page with htmx.
The project is meant to be Linux-specific, so I'm going to use io_uring, pidfs, namespaces, and Linux-specific features in order to drive all of this.
I'm open for suggestions and so on, but this is meant to be a solo project, as this is more of a learning exercise for me than anything else.
Goals
- Have a better understanding of different Linux features from user space down to the kernel internals.
- Most importantly: have fun.
Resources
Create openSUSE images for Arm/RISC-V boards by avicenzi
Project Description
Create openSUSE images (or test generic EFI images) for Arm and/or RISC-V boards that are not yet supported.
Goal for this Hackweek
Create bootable images of Tumbleweed for SBCs that currently have no images available or are untested.
Consider generic EFI images where possible, as some boards can hold a bootloader.
Document in the openSUSE Wiki how to flash and use the image for a given board.
Boards that I have around and there are no images:
- Rock 3B
- Nano PC T3 Plus
- Lichee RV D1
- StartFive VisionFive (has some image needs testing)
Hack Week 22
Hack Week 21
Resources