Comments

• 

  about 1 year ago by fgiudici | Reply

  The Kata Containers project provides the kata-deploy installation method which consists of:

  • a container image packed with all the required binaries compiled statically and all the other artifacts from the release
  • a kata-deploy script, included in the same container image, that should be run on each cluster node
  • kubernetes resources to be installed through kustomize

  During the hackweek the kata-deploy resources have been adapted in an helm chart.

  The resulting chart has been released in an Helm Repo at https://fgiudici.github.io/kata-containers/.

  Add it to Rancher as an App HTTP Repository or add to your helm repositories with:

  $> helm repo add kata-containers https://fgiudici.github.io/kata-containers/

  Install it via the Rancher Marketplace or via the helm command line, but be sure to set the right kind of kubernetes cluster you are using (chart value kubernetes.distribution). Allowed options are vanilla, k3s, rke2 or k0s.

  The default is vanilla so you need to change it to k3s or rke2 if you are using one of the two Rancher distro. This is required because the kata deployment needs to change the containerd config file on the cluster nodes to enable the kata low level runtimes and containerd config location changes depending on the kubernetes distribution used.

  On the Rancher Marketplace UI you will need to change the kubernetes.distribution value editing the chart yaml before deployment (sorry, no UI for that yet). For the helm command line, you will need something like (k3s scenario):

  $> helm install kata-containers kata-containers/kata-containers --namespace kube-system --set kubernetes.distribution=k3s

  After installing Kata Containers, in order to start a kata workload, you have to specify a runtimeClassName in your kubernetes resource: here a sample kata ngnix Deployment.

  The available runtime classes can be retrieved with:

  $> kubectl get runtimeclasses.node.k8s.io

×
Edit Comment 7703
# A First Level Header
## A Second Level Header

Use one asterisk to *emphasize*

Use two asterisks for **strong emphasis**

- Use hyphens
- for unordereed
- lists

This is an [link to example.com](http://example.com/)

This is an image ![an openSUSE geeko icon](https://en.opensuse.org/images/d/d0/Icon-distribution.png)

This is a user link @hans

This is a project link hw#some-cool-title
More Complex Markdown Help
Formatting Help
• Edit
• Preview
The [Kata Containers project](https://katacontainers.io/) provides the [kata-deploy installation method](https://github.com/kata-containers/kata-containers/blob/main/tools/packaging/kata-deploy/README.md) which consists of: * a container image packed with all the required binaries compiled statically and all the other artifacts from the release * a kata-deploy script, included in the same container image, that should be run on each cluster node * kubernetes resources to be installed through kustomize During the hackweek the kata-deploy resources have been adapted in an helm chart. **The resulting chart has been released in an Helm Repo at https://fgiudici.github.io/kata-containers/**. Add it to Rancher as an App HTTP Repository or add to your helm repositories with: $> helm repo add kata-containers https://fgiudici.github.io/kata-containers/ Install it via the Rancher Marketplace or via the helm command line, but **be sure to set the right kind of kubernetes cluster you are using** (chart value *kubernetes.distribution*). Allowed options are vanilla, **k3s**, **rke2** or k0s. The default is _vanilla_ so you need to change it to _k3s_ or _rke2_ if you are using one of the two Rancher distro. This is required because the kata deployment needs to change the containerd config file on the cluster nodes to enable the kata low level runtimes and containerd config location changes depending on the kubernetes distribution used. On the Rancher Marketplace UI you will need to change the kubernetes.distribution value editing the chart yaml before deployment (sorry, no UI for that yet). For the helm command line, you will need something like (k3s scenario): $> helm install kata-containers kata-containers/kata-containers --namespace kube-system --set kubernetes.distribution=k3s After installing Kata Containers, in order to start a kata workload, you have to specify a _runtimeClassName_ in your kubernetes resource: [here a sample kata ngnix Deployment](https://github.com/fgiudici/kata-containers/blob/charts/example-workloads/nginx-kata-deployment.yaml). The available runtime classes can be retrieved with: $> kubectl get runtimeclasses.node.k8s.io
 
×
Reply to fgiudici
The Kata Containers project provides the kata-deploy installation method which consists of:
• a container image packed with all the required binaries compiled statically and all the other artifacts from the release
• a kata-deploy script, included in the same container image, that should be run on each cluster node
• kubernetes resources to be installed through kustomize
During the hackweek the kata-deploy resources have been adapted in an helm chart.
The resulting chart has been released in an Helm Repo at https://fgiudici.github.io/kata-containers/.
Add it to Rancher as an App HTTP Repository or add to your helm repositories with:
$> helm repo add kata-containers https://fgiudici.github.io/kata-containers/
Install it via the Rancher Marketplace or via the helm command line, but be sure to set the right kind of kubernetes cluster you are using (chart value kubernetes.distribution). Allowed options are vanilla, k3s, rke2 or k0s.
The default is vanilla so you need to change it to k3s or rke2 if you are using one of the two Rancher distro. This is required because the kata deployment needs to change the containerd config file on the cluster nodes to enable the kata low level runtimes and containerd config location changes depending on the kubernetes distribution used.
On the Rancher Marketplace UI you will need to change the kubernetes.distribution value editing the chart yaml before deployment (sorry, no UI for that yet). For the helm command line, you will need something like (k3s scenario):
$> helm install kata-containers kata-containers/kata-containers --namespace kube-system --set kubernetes.distribution=k3s
After installing Kata Containers, in order to start a kata workload, you have to specify a runtimeClassName in your kubernetes resource: here a sample kata ngnix Deployment.
The available runtime classes can be retrieved with:
$> kubectl get runtimeclasses.node.k8s.io
---
# A First Level Header
## A Second Level Header

Use one asterisk to *emphasize*

Use two asterisks for **strong emphasis**

- Use hyphens
- for unordereed
- lists

This is an [link to example.com](http://example.com/)

This is an image ![an openSUSE geeko icon](https://en.opensuse.org/images/d/d0/Icon-distribution.png)

This is a user link @hans

This is a project link hw#some-cool-title
More Complex Markdown Help
Formatting Help
• Edit
• Preview
 
• 

  15 days ago by fgiudici | Reply

  The chart is one year old now: it could be worth to get some love and get re-checked and refreshed. Adding current hackweek (if I will have some spare time from the other project I may jump on this... or someone could take over and improve it ).

×
Edit Comment 8740
# A First Level Header
## A Second Level Header

Use one asterisk to *emphasize*

Use two asterisks for **strong emphasis**

- Use hyphens
- for unordereed
- lists

This is an [link to example.com](http://example.com/)

This is an image ![an openSUSE geeko icon](https://en.opensuse.org/images/d/d0/Icon-distribution.png)

This is a user link @hans

This is a project link hw#some-cool-title
More Complex Markdown Help
Formatting Help
• Edit
• Preview
The chart is one year old now: it could be worth to get some love and get re-checked and refreshed. Adding current hackweek (if I will have some spare time from the other project I may jump on this... or someone could take over and improve it  ).
 
×
Reply to fgiudici
The chart is one year old now: it could be worth to get some love and get re-checked and refreshed. Adding current hackweek (if I will have some spare time from the other project I may jump on this... or someone could take over and improve it ).
---
# A First Level Header
## A Second Level Header

Use one asterisk to *emphasize*

Use two asterisks for **strong emphasis**

- Use hyphens
- for unordereed
- lists

This is an [link to example.com](http://example.com/)

This is an image ![an openSUSE geeko icon](https://en.opensuse.org/images/d/d0/Icon-distribution.png)

This is a user link @hans

This is a project link hw#some-cool-title
More Complex Markdown Help
Formatting Help
• Edit
• Preview