Have several raspberry pis at hand, and also bought a Zodiac a while ago, will setup a software define network with ryu. Also will check on package possibility for ryu in opensuse
1 Firmware update:
Update to 0.84
Reference:
http://forums.northboundnetworks.com/downloads/zodiacfx/guides/ZodiacFXUserGuide_0517.pdf
2 Interface connection:
Controller(RP3):
10.0.1.8, port 4
Zodiac FX Switch:
10.0.1.99
Server(laptop/workstation):
10.0.1.0/24, ports 3- mirror port
Clients(RP3s):
10.0.1.0/24, ports 1,2
3 software
Controller: Ryu + Faucet For openflow 1.3 https://github.com/faucetsdn/faucet
Server: Poseidon https://github.com/CyberReboot/poseidon
Clients: normal network setup
Looking for hackers with the skills:
Nothing? Add some keywords!
This project is part of:
Hack Week 17
Activity
Comments
-
over 6 years ago by fgharianinovell | Reply
This looks pretty interesting as im looking into learnng SDN and would be better simulation;) will do my research but let me know how to meet up and work on it together;)
-
over 6 years ago by lyan | Reply
Hi, fgharianinovell, thanks for the interesting first.
I planed to work on ZODIAC FX board, (https://northboundnetworks.com/products/zodiac-fx), so this won't be a simulation, it will be a real SDN network,
There is a similar blog working on it too(https://blog.cyberreboot.org/building-a-software-defined-network-with-raspberry-pis-and-a-zodiac-fx-switch-97184032cdc1), I plan to try it on opensuse though.
If you want to join, which is great, could you work on the stuff about configure "ryu" in a RP3 board. You could reserve one from our orthos, I can focus on Zodiac FX boot up and firmware update, then merge your stuff to build this area network.
I am not quite familiar with "ryu", so your help would be quite helpful to me. I believe the most difficult work should be "control node", then setup two clients for verification.
We can make it work at first, then we can working on package stuff for ryu and related dependency. what do you say?
For contact, we can use email, irc(#virt lyan) or Pidgin. I work remotely in KY, Eastern Time Zone.
Reply to lyan
Hi, fgharianinovell, thanks for the interesting first.
I planed to work on ZODIAC FX board, (https://northboundnetworks.com/products/zodiac-fx), so this won't be a simulation, it will be a real SDN network,
There is a similar blog working on it too(https://blog.cyberreboot.org/building-a-software-defined-network-with-raspberry-pis-and-a-zodiac-fx-switch-97184032cdc1), I plan to try it on opensuse though.
If you want to join, which is great, could you work on the stuff about configure "ryu" in a RP3 board. You could reserve one from our orthos, I can focus on Zodiac FX boot up and firmware update, then merge your stuff to build this area network.
I am not quite familiar with "ryu", so your help would be quite helpful to me. I believe the most difficult work should be "control node", then setup two clients for verification.
We can make it work at first, then we can working on package stuff for ryu and related dependency. what do you say?
For contact, we can use email, irc(#virt lyan) or Pidgin. I work remotely in KY, Eastern Time Zone.
# A First Level Header ## A Second Level Header Use one asterisk to *emphasize* Use two asterisks for **strong emphasis** - Use hyphens - for unordereed - lists This is an [link to example.com](http://example.com/) This is an image  This is a user link @hans This is a project link hw#some-cool-title
-
-
over 6 years ago by fgharianinovell | Reply
Thanks! yes most surely:) according to orthos team, there are not RP3 to setup. so I have hands on one RP3 from a colleague I was playing with today and tried to hack into, and will look into more for Ryu ;) we can communicate also through IRC (fghariani) or email, Im located in NUE-DE and keep you updated ;) happy hacking!
-
over 6 years ago by lyan | Reply
Zodiac_FX firmware update is easier than I thought. Update to latest version 0.84 now.
Zodiac_FX# show version
Firmware version: 0.84
Zodiac_FX(config)# show config
Configuration
Name: Zodiac_FX
MAC Address: 70-B3-D5-6C-D7-CC
IP Address: 10.0.1.99
Netmask: 255.255.255.0
Gateway: 10.0.1.1
OpenFlow Controller: 10.0.1.8
OpenFlow Port: 6633
Openflow Status: Enabled
Failstate: Secure
Force OpenFlow version: Disabled
EtherType Filtering: Disabled
-
over 6 years ago by lyan | Reply
Kind Understand the relationship between Faucet, Ryu, Poseidon now.
Faucet is the real controller, an app of Ryu. Poseidon is an assistant app, data processing, help build better openflow tables for Faucet. Also look into openflow 1.3 for a little bit(1.5 is latest). Good learn so far! -
over 6 years ago by fgharianinovell | Reply
goody! Hacking RPi3 with two different distributions (testing SLES for ARM RPi3), found bugs with needed packages, building the first application with ryu :) playing with the controller and learning about SDN so far ! still need a white box switch for testing;)
Reply to lyan
Kind Understand the relationship between Faucet, Ryu, Poseidon now. Faucet is the real controller, an app of Ryu. Poseidon is an assistant app, data processing, help build better openflow tables for Faucet. Also look into openflow 1.3 for a little bit(1.5 is latest). Good learn so far!
# A First Level Header ## A Second Level Header Use one asterisk to *emphasize* Use two asterisks for **strong emphasis** - Use hyphens - for unordereed - lists This is an [link to example.com](http://example.com/) This is an image  This is a user link @hans This is a project link hw#some-cool-title
Similar Projects
This project is one of its kind!