Build a terminal user-interface (TUI) for Agama by IGonzalezSosa

Description

Officially, Agama offers two different user interfaces. On the one hand, we have the web-based interface, which is the one you see when you run the installation media. On the other hand, we have a command-line interface. In both cases, you can use them using a remote system, either using a browser or the agama CLI.

We would expect most of the cases to be covered by this approach. However, if you cannot use the web-based interface and, for some reason, you cannot access the system through the network, your only option is to use the CLI. This interface offers a mechanism to modify Agama's configuration using an editor (vim, by default), but perhaps you might want to have a more user-friendly way.

Goals

The main goal of this project is to built a minimal terminal user-interface for Agama. This interface will allow the user to install the system providing just a few settings (selecting a product, a storage device and a user password). Then it should report the installation progress.

Resources

• https://agama-project.github.io/
• https://ratatui.rs/

Conclusions

We have summarized our conclusions in a pull request. It includes screenshots ;-) We did not implement all the features we wanted, but we learn a lot during the process. We know that, if needed, we could write a TUI for Agama and we have an idea about how to build it. Good enough.

---

Learn a bit of embedded programming with Rust in a micro:bit v2 by aplanas

Description

micro:bit is a small single board computer with a ARM Cortex-M4 with the FPU extension, with a very constrain amount of memory and a bunch of sensors and leds.

The board is very well documented, with schematics and code for all the features available, so is an excellent platform for learning embedded programming.

Rust is a system programming language that can generate ARM code, and has crates (libraries) to access the micro:bit hardware. There is plenty documentation about how to make small programs that will run in the micro:bit.

Goals

Start learning about embedded programming in Rust, and maybe make some code to the small KS4036F Robot car from keyestudio.

Resources

• micro:bit
• KS4036F
• microbit technical documentation
• schematic
• impl Rust for micro:bit
• Rust Embedded MB2 Discovery Book
• nRF-HAL
• nRF Microbit-v2 BSP (blocking)
• knurling-rs
• C++ microbit codal
• microbit-bsp for Embassy
• Embassy

Diary

Day 1

• Start reading https://mb2.implrust.com/abstraction-layers.html
• Prepare the dev environment (cross compiler, probe-rs)
• Flash first code in the board (blinky led)
• Checking differences between BSP and HAL
• Compile and install a more complex example, with stack protection
• Reading about the simplicity of xtask, as alias for workspace execution
• Reading the CPP code of the official micro:bit libraries. They have a font!

Day 2

• There are multiple BSP for the microbit. One is using async code for non-blocking operations
• Download and study a bit the API for microbit-v2, the nRF official crate
• Take a look of the KS4036F programming, seems that the communication is multiplexed via I2C
• The motor speed can be selected via PWM (pulse with modulation): power it longer (high frequency), and it will increase the speed
• Scrolling some text
• Debug by printing! defmt is a crate that can be used with probe-rs to emit logs
• Start reading input from the board: buttons
• The logo can be touched and detected as a floating point value

Day 3

• A bit confused how to read the float value from a pin

---

Exploring Rust's potential: from basics to security by sferracci

Description

This project aims to conduct a focused investigation and practical application of the Rust programming language, with a specific emphasis on its security model. A key component will be identifying and understanding the most common vulnerabilities that can be found in Rust code.

Goals

Achieve a beginner/intermediate level of proficiency in writing Rust code. This will be measured by trying to solve LeetCode problems focusing on common data structures and algorithms. Study Rust vulnerabilities and learning best practices to avoid them.

Resources

Rust book: https://doc.rust-lang.org/book/

---

OpenPlatform Self-Service Portal by tmuntan1

Description

In SUSE IT, we developed an internal developer platform for our engineers using SUSE technologies such as RKE2, SUSE Virtualization, and Rancher. While it works well for our existing users, the onboarding process could be better.

To improve our customer experience, I would like to build a self-service portal to make it easy for people to accomplish common actions. To get started, I would have the portal create Jira SD tickets for our customers to have better information in our tickets, but eventually I want to add automation to reduce our workload.

Goals

• Build a frontend website (Angular) that helps customers create Jira SD tickets.
• Build a backend (Rust with Axum) for the backend, which would do all the hard work for the frontend.

Resources (SUSE VPN only)

• development site: https://ui-dev.openplatform.suse.com/login?returnUrl=%2Fopenplatform%2Fforms
• https://gitlab.suse.de/itpe/core/open-platform/op-portal/backend
• https://gitlab.suse.de/itpe/core/open-platform/op-portal/frontend

---

Looking at Rust if it could be an interesting programming language by jsmeix

Get some basic understanding of Rust security related features from a general point of view.

This Hack Week project is not to learn Rust to become a Rust programmer. This might happen later but it is not the goal of this Hack Week project.

The goal of this Hack Week project is to evaluate if Rust could be an interesting programming language.

An interesting programming language must make it easier to write code that is correct and stays correct when over time others maintain and enhance it than the opposite.

---