Integrate Firecracker (microVMs) with a Cloud Foundry app runtime scheduler
a project by tassis
Updated almost 6 years ago. 2 hacker ♥️. 1 follower.

Description

Firecracker is an open-source virtualization technology that is purpose-built for creating and managing secure, multi-tenant container and function-based services.

Integrating Firecracker with a CF container runtime will bring security to the underlying Kubernetes cluster and to other apps when using the Cloud Application Platform.

Links (don't share them!)

Planning board

Join this project

Looking for hackers with the skills:

kvm networking virtualization kubernetes

This project is part of:

Hack Week 19

Activity

  • almost 6 years ago: EDiGiacinto liked this project.
  • almost 6 years ago: tassis added keyword "kvm" to this project.
  • almost 6 years ago: tassis added keyword "networking" to this project.
  • almost 6 years ago: tassis added keyword "virtualization" to this project.
  • almost 6 years ago: tassis added keyword "kubernetes" to this project.
  • almost 6 years ago: dfaggioli liked this project.
  • almost 6 years ago: tassis started this project.
  • almost 6 years ago: tassis originated this project.


    • Comments

    Be the first to comment!

    Similar Projects

    Reassess HiFive Premier P550 board (for RISC-V virtualization) by a_faerber

    Description

    With growing interest in the RISC-V instruction set architecture, we need to re-evaluate ways of building packages for it:

    Currently openSUSE OBS is using x86_64 build workers, using QEMU userspace-level (syscall) emulation inside KVM VMs. Occasionally this setup causes build failures, due to timing differences or incomplete emulation. Andreas Schwab and others have collected workarounds in projects like openSUSE:Factory:RISCV to deal with some of those issues.

    Ideally we would be using native riscv64 KVM VMs instead. This requires CPUs with the H extension. Two generally available development boards feature the ESWIN 7700X System-on-Chip with SiFive P550 CPUs, HiFive Premier P550 and Milk-V Megrez. We've had access to the HiFive Premier P550 for some time now, but the early version (based on Yocto) had issues with the bootloader, and reportedly later boards were booting to a dracut emergency shell for lack of block device drivers.

    Goals

    • Update the boot firmware
    • Test whether and how far openSUSE Tumbleweed boots

    Results

    • Boot firmware image 2025.11.00 successfully flashed onto board
      • Enables UEFI boot in U-Boot by default
      • U-Boot's embedded Flat Device Tree is lacking a timebase-frequency, required for recent (6.16.3) mainline kernels (panic leading to reset, visible via earlycon=sbi)
    • Tested eswin/eic7700-hifive-premier-p550.dtb from Ubuntu 2025.11.00 image
      • Allows to boot past the above panic, but times out in JeOS image while waiting for block device, dropping to dracut emergency shell
      • No devices shown in lsblk -- 6.16 appears to be lacking device drivers still

    Resources

    A CLI for Harvester by mohamed.belgaied

    Harvester does not officially come with a CLI tool, the user is supposed to interact with Harvester mostly through the UI. Though it is theoretically possible to use kubectl to interact with Harvester, the manipulation of Kubevirt YAML objects is absolutely not user friendly. Inspired by tools like multipass from Canonical to easily and rapidly create one of multiple VMs, I began the development of Harvester CLI. Currently, it works but Harvester CLI needs some love to be up-to-date with Harvester v1.0.2 and needs some bug fixes and improvements as well.

    Project Description

    Harvester CLI is a command line interface tool written in Go, designed to simplify interfacing with a Harvester cluster as a user. It is especially useful for testing purposes as you can easily and rapidly create VMs in Harvester by providing a simple command such as: harvester vm create my-vm --count 5 to create 5 VMs named my-vm-01 to my-vm-05.

    asciicast

    Harvester CLI is functional but needs a number of improvements: up-to-date functionality with Harvester v1.0.2 (some minor issues right now), modifying the default behaviour to create an opensuse VM instead of an ubuntu VM, solve some bugs, etc.

    Github Repo for Harvester CLI: https://github.com/belgaied2/harvester-cli

    Done in previous Hackweeks

    • Create a Github actions pipeline to automatically integrate Harvester CLI to Homebrew repositories: DONE
    • Automatically package Harvester CLI for OpenSUSE / Redhat RPMs or DEBs: DONE

    Goal for this Hackweek

    The goal for this Hackweek is to bring Harvester CLI up-to-speed with latest Harvester versions (v1.3.X and v1.4.X), and improve the code quality as well as implement some simple features and bug fixes.

    Some nice additions might be: * Improve handling of namespaced objects * Add features, such as network management or Load Balancer creation ? * Add more unit tests and, why not, e2e tests * Improve CI * Improve the overall code quality * Test the program and create issues for it

    Issue list is here: https://github.com/belgaied2/harvester-cli/issues

    Resources

    The project is written in Go, and using client-go the Kubernetes Go Client libraries to communicate with the Harvester API (which is Kubernetes in fact). Welcome contributions are:

    • Testing it and creating issues
    • Documentation
    • Go code improvement

    What you might learn

    Harvester CLI might be interesting to you if you want to learn more about:

    • GitHub Actions
    • Harvester as a SUSE Product
    • Go programming language
    • Kubernetes API
    • Kubevirt API objects (Manipulating VMs and VM Configuration in Kubernetes using Kubevirt)

    SUSE KVM Best Practices - Focus on SAP Workloads and Use Cases by roseswe

    Description

    SUSE Best Practices around KVM, especially for SAP workloads. Early Google presentation already made from various customer projects and SUSE sources.

    Goals

    • Complete presentation we can reuse in SUSE Consulting projects
    • 2025: Bring it to version 1.00 ready for customers

    Resources

    KVM (virt-manager) images

    SUSE/SAP/KVM Best Practices

    • https://documentation.suse.com/en-us/sles/15-SP6/single-html/SLES-virtualization/
    • SAP Note 1522993 - "Linux: SAP on SUSE KVM - Kernel-based Virtual Machine" && 2284516 - SAP HANA virtualized on SUSE Linux Enterprise hypervisors https://me.sap.com/notes/2284516
    • SUSECon24: [TUTORIAL-1253] Virtualizing SAP workloads with SUSE KVM || https://youtu.be/PTkpRVpX2PM
    • SUSE Best Practices for SAP HANA on KVM - https://documentation.suse.com/sbp/sap-15/html/SBP-SLES4SAP-HANAonKVM-SLES15SP4/index.html

    SUSE KVM Best Practices - Focus on SAP Workloads and Use Cases by roseswe

    Description

    SUSE Best Practices around KVM, especially for SAP workloads. Early Google presentation already made from various customer projects and SUSE sources.

    Goals

    • Complete presentation we can reuse in SUSE Consulting projects
    • 2025: Bring it to version 1.00 ready for customers

    Resources

    KVM (virt-manager) images

    SUSE/SAP/KVM Best Practices

    • https://documentation.suse.com/en-us/sles/15-SP6/single-html/SLES-virtualization/
    • SAP Note 1522993 - "Linux: SAP on SUSE KVM - Kernel-based Virtual Machine" && 2284516 - SAP HANA virtualized on SUSE Linux Enterprise hypervisors https://me.sap.com/notes/2284516
    • SUSECon24: [TUTORIAL-1253] Virtualizing SAP workloads with SUSE KVM || https://youtu.be/PTkpRVpX2PM
    • SUSE Best Practices for SAP HANA on KVM - https://documentation.suse.com/sbp/sap-15/html/SBP-SLES4SAP-HANAonKVM-SLES15SP4/index.html

    SUSE Virtualization (Harvester): VM Import UI flow by wombelix

    Description

    SUSE Virtualization (Harvester) has a vm-import-controller that allows migrating VMs from VMware and OpenStack, but users need to write manifest files and apply them with kubectl to use it. This project is about adding the missing UI pieces to the harvester-ui-extension, making VM Imports accessible without requiring Kubernetes and YAML knowledge.

    VMware and OpenStack admins aren't automatically familiar with Kubernetes and YAML. Implementing the UI part for the VM Import feature makes it easier to use and more accessible. The Harvester Enhancement Proposal (HEP) VM Migration controller included a UI flow implementation in its scope. Issue #2274 received multiple comments that an UI integration would be a nice addition, and issue #4663 was created to request the implementation but eventually stalled.

    Right now users need to manually create either VmwareSource or OpenstackSource resources, then write VirtualMachineImport manifests with network mappings and all the other configuration options. Users should be able to do that and track import status through the UI without writing YAML.

    Work during the Hack Week will be done in this fork in a branch called suse-hack-week-25, making progress publicly visible and open for contributions. When everything works out and the branch is in good shape, it will be submitted as a pull request to harvester-ui-extension to get it included in the next Harvester release.

    Testing will focus on VMware since that's what is available in the lab environment (SUSE Virtualization 1.6 single-node cluster, ESXi 8.0 standalone host). Given that this is about UI and surfacing what the vm-import-controller handles, the implementation should work for OpenStack imports as well.

    This project is also a personal challenge to learn vue.js and get familiar with Rancher Extensions development, since harvester-ui-extension is built on that framework.

    Goals

    • Learn Vue.js and Rancher Extensions fundamentals required to finish the project
    • Read and learn from other Rancher UI Extensions code, especially understanding the harvester-ui-extension code base
    • Understand what the vm-import-controller and its CRDs require, identify ready to use components in the Rancher UI Extension API that can be leveraged
    • Implement UI logic for creating and managing VmwareSource / OpenstackSource and VirtualMachineImport resources with all relevant configuration options and credentials
    • Implemnt UI elements to display VirtualMachineImport status and errors

    Resources

    HEP and related discussion

    SUSE Virtualization VM Import Documentation

    Rancher Extensions Documentation

    Rancher UI Plugin Examples

    Vue Router Essentials

    Vue Router API

    Vuex Documentation

    Reassess HiFive Premier P550 board (for RISC-V virtualization) by a_faerber

    Description

    With growing interest in the RISC-V instruction set architecture, we need to re-evaluate ways of building packages for it:

    Currently openSUSE OBS is using x86_64 build workers, using QEMU userspace-level (syscall) emulation inside KVM VMs. Occasionally this setup causes build failures, due to timing differences or incomplete emulation. Andreas Schwab and others have collected workarounds in projects like openSUSE:Factory:RISCV to deal with some of those issues.

    Ideally we would be using native riscv64 KVM VMs instead. This requires CPUs with the H extension. Two generally available development boards feature the ESWIN 7700X System-on-Chip with SiFive P550 CPUs, HiFive Premier P550 and Milk-V Megrez. We've had access to the HiFive Premier P550 for some time now, but the early version (based on Yocto) had issues with the bootloader, and reportedly later boards were booting to a dracut emergency shell for lack of block device drivers.

    Goals

    • Update the boot firmware
    • Test whether and how far openSUSE Tumbleweed boots

    Results

    • Boot firmware image 2025.11.00 successfully flashed onto board
      • Enables UEFI boot in U-Boot by default
      • U-Boot's embedded Flat Device Tree is lacking a timebase-frequency, required for recent (6.16.3) mainline kernels (panic leading to reset, visible via earlycon=sbi)
    • Tested eswin/eic7700-hifive-premier-p550.dtb from Ubuntu 2025.11.00 image
      • Allows to boot past the above panic, but times out in JeOS image while waiting for block device, dropping to dracut emergency shell
      • No devices shown in lsblk -- 6.16 appears to be lacking device drivers still

    Resources

    Extracting, converting and importing VMs from Nutanix into SUSE Virtualization by emendonca

    Description

    The idea is to delve into understanding Nutanix AHV internals on how it stores and runs VMs, and how to extract them in an automated way for importing into a KVM-compatible hypervisor, like SUSE Virtualization/Harvester. The final product will be not only be documentation, but a working prototype that can be used to automate the process.

    Goals

    1) document how to create a simple lab with NutaniX AHV community edition 2) determine the basic elements we need to interact with 3) determine what are the best paths to grab the images through, balancing speed and complexity 4) document possible issues and create a roadmap for tackling them 4) should we adapt an existing solution or implement a new one? 5) implement the solution!

    Resources

    Similar project I created: https://github.com/doccaz/vm-import-ui Nutanix AHV forums Nutanix technical bulletins

    Q2Boot - A handy QEMU VM launcher by amanzini

    Description

    Q2Boot (Qemu Quick Boot) is a command-line tool that wraps QEMU to provide a streamlined experience for launching virtual machines. It automatically configures common settings like KVM acceleration, virtio drivers, and networking while allowing customization through both configuration files and command-line options.

    The project originally was a personal utility in D, now recently rewritten in idiomatic Go. It lives at repository https://github.com/ilmanzo/q2boot

    Goals

    Improve the project, testing with different scenarios , address issues and propose new features. It will benefit of some basic integration testing by providing small sample disk images.

    Updates

    • Dec 1, 2025 : refactor command line options, added structured logging. Released v0.0.2
    • Dec 2, 2025 : added external monitor via telnet option
    • Dec 4, 2025 : released v0.0.3 with architecture auto-detection
    • Dec 5, 2025 : filing new issues and general polishment. Designing E2E testing

    Resources

    Rancher/k8s Trouble-Maker by tonyhansen

    Project Description

    When studying for my RHCSA, I found trouble-maker, which is a program that breaks a Linux OS and requires you to fix it. I want to create something similar for Rancher/k8s that can allow for troubleshooting an unknown environment.

    Goals for Hackweek 25

    • Update to modern Rancher and verify that existing tests still work
    • Change testing logic to populate secrets instead of requiring a secondary script
    • Add new tests

    Goals for Hackweek 24 (Complete)

    • Create a basic framework for creating Rancher/k8s cluster lab environments as needed for the Break/Fix
    • Create at least 5 modules that can be applied to the cluster and require troubleshooting

    Resources

    • https://github.com/celidon/rancher-troublemaker
    • https://github.com/rancher/terraform-provider-rancher2
    • https://github.com/rancher/tf-rancher-up
    • https://github.com/rancher/quickstart

    Kubernetes-Based ML Lifecycle Automation by lmiranda

    Description

    This project aims to build a complete end-to-end Machine Learning pipeline running entirely on Kubernetes, using Go, and containerized ML components.

    The pipeline will automate the lifecycle of a machine learning model, including:

    • Data ingestion/collection
    • Model training as a Kubernetes Job
    • Model artifact storage in an S3-compatible registry (e.g. Minio)
    • A Go-based deployment controller that automatically deploys new model versions to Kubernetes using Rancher
    • A lightweight inference service that loads and serves the latest model
    • Monitoring of model performance and service health through Prometheus/Grafana

    The outcome is a working prototype of an MLOps workflow that demonstrates how AI workloads can be trained, versioned, deployed, and monitored using the Kubernetes ecosystem.

    Goals

    By the end of Hack Week, the project should:

    1. Produce a fully functional ML pipeline running on Kubernetes with:

      • Data collection job
      • Training job container
      • Storage and versioning of trained models
      • Automated deployment of new model versions
      • Model inference API service
      • Basic monitoring dashboards

    2. Showcase a Go-based deployment automation component, which scans the model registry and automatically generates & applies Kubernetes manifests for new model versions.

    3. Enable continuous improvement by making the system modular and extensible (e.g., additional models, metrics, autoscaling, or drift detection can be added later).

    4. Prepare a short demo explaining the end-to-end process and how new models flow through the system.

    Resources

    Project Repository

    Updates

    1. Training pipeline and datasets
    2. Inference Service py

    A CLI for Harvester by mohamed.belgaied

    Harvester does not officially come with a CLI tool, the user is supposed to interact with Harvester mostly through the UI. Though it is theoretically possible to use kubectl to interact with Harvester, the manipulation of Kubevirt YAML objects is absolutely not user friendly. Inspired by tools like multipass from Canonical to easily and rapidly create one of multiple VMs, I began the development of Harvester CLI. Currently, it works but Harvester CLI needs some love to be up-to-date with Harvester v1.0.2 and needs some bug fixes and improvements as well.

    Project Description

    Harvester CLI is a command line interface tool written in Go, designed to simplify interfacing with a Harvester cluster as a user. It is especially useful for testing purposes as you can easily and rapidly create VMs in Harvester by providing a simple command such as: harvester vm create my-vm --count 5 to create 5 VMs named my-vm-01 to my-vm-05.

    asciicast

    Harvester CLI is functional but needs a number of improvements: up-to-date functionality with Harvester v1.0.2 (some minor issues right now), modifying the default behaviour to create an opensuse VM instead of an ubuntu VM, solve some bugs, etc.

    Github Repo for Harvester CLI: https://github.com/belgaied2/harvester-cli

    Done in previous Hackweeks

    • Create a Github actions pipeline to automatically integrate Harvester CLI to Homebrew repositories: DONE
    • Automatically package Harvester CLI for OpenSUSE / Redhat RPMs or DEBs: DONE

    Goal for this Hackweek

    The goal for this Hackweek is to bring Harvester CLI up-to-speed with latest Harvester versions (v1.3.X and v1.4.X), and improve the code quality as well as implement some simple features and bug fixes.

    Some nice additions might be: * Improve handling of namespaced objects * Add features, such as network management or Load Balancer creation ? * Add more unit tests and, why not, e2e tests * Improve CI * Improve the overall code quality * Test the program and create issues for it

    Issue list is here: https://github.com/belgaied2/harvester-cli/issues

    Resources

    The project is written in Go, and using client-go the Kubernetes Go Client libraries to communicate with the Harvester API (which is Kubernetes in fact). Welcome contributions are:

    • Testing it and creating issues
    • Documentation
    • Go code improvement

    What you might learn

    Harvester CLI might be interesting to you if you want to learn more about:

    • GitHub Actions
    • Harvester as a SUSE Product
    • Go programming language
    • Kubernetes API
    • Kubevirt API objects (Manipulating VMs and VM Configuration in Kubernetes using Kubevirt)

    OpenPlatform Self-Service Portal by tmuntan1

    Description

    In SUSE IT, we developed an internal developer platform for our engineers using SUSE technologies such as RKE2, SUSE Virtualization, and Rancher. While it works well for our existing users, the onboarding process could be better.

    To improve our customer experience, I would like to build a self-service portal to make it easy for people to accomplish common actions. To get started, I would have the portal create Jira SD tickets for our customers to have better information in our tickets, but eventually I want to add automation to reduce our workload.

    Goals

    • Build a frontend website (Angular) that helps customers create Jira SD tickets.
    • Build a backend (Rust with Axum) for the backend, which would do all the hard work for the frontend.

    Resources (SUSE VPN only)

    • development site: https://ui-dev.openplatform.suse.com/login?returnUrl=%2Fopenplatform%2Fforms
    • https://gitlab.suse.de/itpe/core/open-platform/op-portal/backend
    • https://gitlab.suse.de/itpe/core/open-platform/op-portal/frontend

    Exploring Modern AI Trends and Kubernetes-Based AI Infrastructure by jluo

    Description

    Build a solid understanding of the current landscape of Artificial Intelligence and how modern cloud-native technologies—especially Kubernetes—support AI workloads.

    Goals

    Use Gemini Learning Mode to guide the exploration, surface relevant concepts, and structure the learning journey:

    • Gain insight into the latest AI trends, tools, and architectural concepts.
    • Understand how Kubernetes and related cloud-native technologies are used in the AI ecosystem (model training, deployment, orchestration, MLOps).

    Resources

    • Red Hat AI Topic Articles

      • https://www.redhat.com/en/topics/ai

    • Kubeflow Documentation

      • https://www.kubeflow.org/docs/

    • Q4 2025 CNCF Technology Landscape Radar report:

      • https://www.cncf.io/announcements/2025/11/11/cncf-and-slashdata-report-finds-leading-ai-tools-gaining-adoption-in-cloud-native-ecosystems/
      • https://www.cncf.io/wp-content/uploads/2025/11/cncfreporttechradar_111025a.pdf

    • Agent-to-Agent (A2A) Protocol

      • https://developers.googleblog.com/en/a2a-a-new-era-of-agent-interoperability/