Setup an iscsi server on minnowboard/espressobin/odroid c2 based on opensuse tumbleweed, use two Nics to support multipath Setup an iscsi initiator on odroid c2 and dm

Looking for hackers with the skills:

Nothing? Add some keywords!

This project is part of:

Hack Week 16

Activity

  • over 6 years ago: ldevulder liked this project.
  • over 6 years ago: lyan started this project.
  • over 6 years ago: lyan originated this project.

  • Comments

    • lyan
      over 6 years ago by lyan | Reply

      minowboard is out of option now. Got a failure board. Should be a better choice and easy to implement since it's a x86/64 arch, anyone, need focus on espressobin now.

    • lyan
      over 6 years ago by lyan | Reply

      expressobin is actually not a good choice either, its switch option makes it not good for mulit-nic support. So back to odroid c2 with another usb nic

    • lyan
      over 6 years ago by lyan | Reply

      targetcli and LIO for target setup iscsiadm and multipath for initiator setup

    • lyan
      over 6 years ago by lyan | Reply

      common problems: 1. multipath policy setup multipath -p multibus -v0

      iscsi-initiator:/dev/mapper # multipath -ll 360014050f7ba7adf66f4e13a1336f5c8 dm-0 LIO-ORG,FILEIO size=10G features='0' hwhandler='0' wp=rw -+- policy='service-time 0' prio=1 status=enabled |- 2:0:0:0 sda 8:0 active ready running- 3:0:0:0 sdb 8:16 active ready running

    Similar Projects

    This project is one of its kind!