Projects in the topic hardware

work on sunxi a64 cpufreq driver (for teres-1, pine64) an idea by mbrugger With the teres-1 [1] laptop we have a first arm64 device we could use as end-users. Much work to run mainline kernel + u-boot was done already. But power consumption of the laptop is not optimal (~2 hours of battery life time). The idea is to support cpufreq for the A64 SoC upstream, which would enable the teres-1, pine64 and pinebook to run more power efficient. up to now it seems nobody is working on the driver [2]. Updated about 3 years ago. 3 hacker ♥️. 3 followers. Has no hacker: grab it!
"Physical" notifications with Raspberry Pi and addressable LEDs a project by dannysauer I'd like a way to have a device on my desk which lights up to indicate that I have something I should be paying attention to. Initially, I'd like this to be for Office365 calendar events and GitHub mentions, but ideally it should support arbitrary messages. The plan is to assign specific colors (ideally "patterns" consisting of a sequence of colors and time) to specific message types. I have a handful of raspberry Pi Zeroes, a couple of OLEDs, a strand of individually-addressable RGB LEDs, a power supply, and some misc electronics (like the 3.3-5v logic level shifter necessary for the 5v LED strand). I'm thinking Python is probably the way to go for the software. I'm hoping OpenSUSE actually works on the Pi zero. :D If not, there's an ESP32 with a built-in display and a few Pi 3s laying around barely used, maybe one of them will work. Updated about 2 years ago. 3 hacker ♥️. 1 follower.

work on sunxi a64 cpufreq driver (for teres-1, pine64)

With the teres-1 [1] laptop we have a first arm64 device we could use as end-users. Much work to run mainline kernel + u-boot was done already. But power consumption of the laptop is not optimal (~2 hours of battery life time). The idea is to support cpufreq for the A64 SoC upstream, which would enable the teres-1, pine64 and pinebook to run more power efficient. up to now it seems nobody is working on the driver [2].

Updated about 3 years ago. 3 hacker ♥️. 3 followers. Has no hacker: grab it!

"Physical" notifications with Raspberry Pi and addressable LEDs

a project by dannysauer

I'd like a way to have a device on my desk which lights up to indicate that I have something I should be paying attention to. Initially, I'd like this to be for Office365 calendar events and GitHub mentions, but ideally it should support arbitrary messages. The plan is to assign specific colors (ideally "patterns" consisting of a sequence of colors and time) to specific message types. I have a handful of raspberry Pi Zeroes, a couple of OLEDs, a strand of individually-addressable RGB LEDs, a power supply, and some misc electronics (like the 3.3-5v logic level shifter necessary for the 5v LED strand). I'm thinking Python is probably the way to go for the software. I'm hoping OpenSUSE actually works on the Pi zero. :D If not, there's an ESP32 with a built-in display and a few Pi 3s laying around barely used, maybe one of them will work.

Updated about 2 years ago. 3 hacker ♥️. 1 follower.